How to Open the Hood of the Tiguan L?

Where is the Wuling Hongguang radiator located?

Wuling Hongguang radiator is located inside the engine compartment. The car radiator generally refers to the car cooling system's heat exchanger, which consists of three parts: the inlet chamber, outlet chamber, main plate, and radiator core. The steps for adding coolant to the car radiator are as follows: 1. Turn the pressure cap counterclockwise. If you hear a hissing sound, wait until the sound disappears before opening it. 2. Add an appropriate amount of coolant to the coolant expansion tank until the level is between the MAX and MIN marks. 3. With the coolant expansion tank cap open, start the engine. 4. After starting the engine, the coolant level in the tank will gradually decrease. At this point, add an appropriate amount of coolant to the expansion tank until the level reaches between the MAX and MIN marks. 5. Reinstall the cap, ensuring that the pressure cap is hand-tightened and fully seated.

1

0

Share

How to Add Windshield Washer Fluid to a Ford Focus?

Ford Focus windshield washer fluid reservoir is located on the left side of the engine compartment, with a washer symbol on the cap. The Ford Focus windshield washer fluid capacity is 4L, add appropriately according to the remaining amount. The Ford Focus windshield washer fluid filling tutorial is as follows: 1. First use the wiper switch knob to drain the existing washer fluid. 2. After spraying out all the old fluid, add a small amount of new washer fluid into the filler opening. 3. Activate the wiper switch again to clear out any remaining old fluid. 4. When no more fluid sprays out during the second activation, add approximately 4L of new windshield washer solution, then securely close the reservoir cap. The filling process is now complete.

13

1

Share

How to Turn Off the Auto Start-Stop in the Honda Avancier?

The auto start-stop function of the Honda Avancier is set via a mechanical button located on the left side of the driver's seat. To turn it off, simply press the button. Here are some tips for using the auto start-stop feature in the Honda Avancier: ① The auto start-stop function can only be manually turned off each time. ② It is recommended to turn off the start-stop function during frequent traffic jams. ③ Additionally, this function should be turned off when starting on a slope. Possible reasons why the auto start-stop in the Honda Avancier may not work: ① The start-stop function is activated only when the battery charge is above 60%. ② The temperature inside or outside the car is too low. ③ The engine has not reached the standard operating temperature. ④ The steering wheel angle deviates from the central axis by more than 30 degrees.

4

0

Share

Reasons for BMW 5 Series Steering Wheel Auto-Adjustment Failure?

If the vehicle does not return to its preset position upon next entry, possible causes include: 1. Verify if the same key is being used. BMW stores personalized settings data for each key. Using a different key will prevent the steering wheel from returning to the position set by the previous key. 2. Prolonged parking with low voltage or battery disconnection may cause position data loss, requiring resetting. The reset method is: Adjust the steering wheel to the desired position. Press and hold the M button above the seat switch for over 3 seconds; then press button 1 or 2 beside it to complete storage. 3. If resetting doesn't work, try upgrading the vehicle's system. If the issue persists after upgrade, the steering column may need replacement.

8

1

Share

How to Turn on the Cold Air in an Audi Car?

Audi car air conditioning to turn on the cold air method is as follows: 1. Start the car, press the AC switch, select the cooling mode, and choose the corresponding air direction mode. The A/C switch is the so-called air conditioning switch, which essentially controls whether the compressor works. 2. The car air conditioning system consists of a compressor, condenser, throttle element, evaporator, fan, and necessary control components, used to regulate the temperature and humidity inside the car, providing a comfortable environment for passengers. 3. When the compressor is working, it sucks in the low-temperature and low-pressure gaseous refrigerant from the evaporator, compresses it, increasing the temperature and pressure of the refrigerant, and sends it to the condenser. 4. In the condenser, the high-temperature and high-pressure gaseous refrigerant transfers heat to the outside air passing through the condenser and liquefies, turning into a liquid.

3

Share

What grade of gasoline does the Odyssey use?

The Odyssey uses 92-octane gasoline. Below is the relevant introduction: 1. The gasoline grade is the ratio of the gasoline's anti-knock performance to that of standard gasoline. The Odyssey is an MPV under GAC Honda, with body dimensions of 4847mm in length, 1820mm in width, 1702mm in height, and a wheelbase of 2900mm. 2. The Odyssey is equipped with a 2.0L inline naturally aspirated engine, with a maximum power output of 107 kilowatts, paired with an electronic continuously variable transmission. The Odyssey's suspension system features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension, with a front-wheel-drive layout and electric power steering.

12

2

Share

How to Open the Hood of the Tiguan L?

Where is the Wuling Hongguang radiator located?

How to Add Windshield Washer Fluid to a Ford Focus?

How to Turn Off the Auto Start-Stop in the Honda Avancier?

Reasons for BMW 5 Series Steering Wheel Auto-Adjustment Failure?

How to Turn on the Cold Air in an Audi Car?

What grade of gasoline does the Odyssey use?

Where is the engine sensor located?

How to Distinguish Between China 5 and China 6?

Who is at fault when a lane-cutting vehicle gets hit?

Can Brake Fluid Be Topped Up If It's Low?