···
Log in / Register

How to open the fuel tank of GAC Trumpchi GS8?

6Answers
MicahFitz
07/29/2025, 09:45:46 PM

When the ignition switch is in the "ACC" position, press and hold (for more than 1.5 seconds) the fuel tank cover opening button, and the fuel tank cover will pop outward. The fuel tank cover can also be opened from the inside, with an emergency fuel tank cover pull handle installed on the right side of the luggage compartment.

Was this review help?
116
Share
OMaggie
08/15/2025, 03:35:21 AM

I've been driving the GS8 for over a year now, and opening the fuel tank cap is quite straightforward. There's usually a button with a fuel icon near the door handle on the lower left side of the driver's seat. Once you're seated and settled in, just press it, and the fuel tank cap will automatically unlock and pop open. Then, you can get out of the car, move to the rear, and manually unscrew the cap to refuel. Remember to always turn off the engine before refueling, and avoid smoking or using your phone to prevent fire hazards. The GS8's fuel tank system is designed to be very reliable, but during regular maintenance, make sure to clean the dust around the switch to prevent it from getting stuck. If it occasionally doesn't open, it might be a minor electrical issue—check the fuse or visit a service center, but don't try to force it open yourself.

Was this review help?
20
Share
Expand All
StPaige
10/20/2025, 10:16:50 PM

Hey, as a GS8 owner, opening the fuel tank is super easy! Just sit in the car, look for a small button on the side of the steering wheel with a fuel pump icon, and press it—the external cap will unlock automatically. Then get out and manually open the cap at the rear to refuel. It might also have a key remote function: try holding down the unlock button. Remember to turn off the engine before refueling—safety first. Also, check the cap’s seal regularly to prevent rainwater from getting in. The overall design is user-friendly with no major issues.

Was this review help?
10
Share
Expand All
JeremiahLee
12/03/2025, 09:44:34 PM

When frequently refueling the GS8 for family transportation, opening the fuel tank is straightforward: After sitting in the driver's seat, glance below the center console or near the door to find the fuel release switch button. Press it to open the fuel tank cap. Then, walk to the rear of the vehicle and manually open the cap to begin refueling. Remember, never use a mobile phone during the entire refueling process—it's extremely hazardous. Ensure the cap is tightly secured to prevent leaks. If it occasionally malfunctions, don’t panic; it might be due to a stuck button or minor wiring issue—just inspect it.

Was this review help?
17
Share
Expand All
FrankLynn
01/23/2026, 11:08:14 PM

I think the GS8's fuel tank opening is similar to most SUVs. You first get into the car, find a switch button near the driver's footwell, and press it to unlock the cap. Then get out and manually open the fuel filler at the rear. Safety tip: Don't let children touch anything while refueling to avoid accidents. Keep the cap clean to prevent clogging. Some models may unlock the fuel door simultaneously when unlocking the car doors. Overall maintenance is simple and reliable.

Was this review help?
14
Share
Expand All
DelDante
04/19/2026, 10:21:43 PM

Opening the GS8 fuel tank is quite convenient. After getting in the car, locate the fuel release switch on the left side of the steering wheel—that small button—just press it gently, and the outer cover pops open. After exiting the vehicle, manually unscrew the cap to refuel. Remember to turn off the engine before refueling; don't leave it running. Regularly clean the switch area with a soft cloth to prevent dust buildup and jamming. If it occasionally fails, don't force it—it might be a blown fuse or loose wiring, so have it checked at a professional service point.

Was this review help?
5
Share
Expand All
More Q&A

What does the 'a' next to the electronic handbrake mean?

The 'a' next to the electronic handbrake represents the auto start-stop function, whose English name is autohold. After turning on this switch, when the vehicle is braked to a stop during driving, even if the brake is released, the vehicle will not continue to move. It will only resume driving when the accelerator is pressed, and can only be turned off manually. This function is suitable for situations like going up and down slopes or frequent starts and stops. The automatic parking system is a technical application that can achieve an automatic handbrake during vehicle operation. This technology allows drivers to avoid prolonged braking when the vehicle is stopped, and prevents unnecessary sliding when the automatic electronic parking brake is engaged.
110
Share

What is the trunk size of the Atenza?

The trunk size of the Atenza is 1180mm, 1035mm, and 515mm. Taking the 2021 Atenza 2.0L Skyactiv-G Luxury Edition as an example: This car is manufactured by FAW Mazda, classified as a mid-size sedan, with a gasoline engine, a 6-speed automatic transmission, and a body style of a 4-door, 5-seater sedan. The top speed is 212 km/h. The car's dimensions are 4870mm in length, 1840mm in width, and 1445mm in height, with a wheelbase of 2830mm. It features a naturally aspirated engine, front-wheel drive, a front suspension type of MacPherson strut, and a rear suspension type of multi-link independent suspension.
108
Share

What is the general height of an SUV jack?

Mechanical jacks typically have a maximum lifting height of around 600 millimeters, including both the base and the core. The height of a jack is divided into three parts: minimum height, auxiliary height, and maximum height. Minimum height of the jack: The minimum height refers to the distance from the top of the bearing platform to the ground. This is the height of the jack in its hydraulic state when not in use. Auxiliary height of the jack: The auxiliary height refers to the threaded support base, which can be rotated from the end of the support base. The highest height achieved after rotation is called the auxiliary height. Maximum height of the jack: The maximum height refers to the jack being raised to its highest point. If there is an auxiliary height, it is also rotated to its highest point. The sum of these two heights is the maximum height.
115
Share

What is the maximum wading depth of the Defender?

According to official specifications, the Defender has a maximum wading depth of 90 cm. Common tire specifications include 275/45R22 and 255/60R20, with body lengths of 5018mm and 4583mm available. The vehicle is equipped with an 8-speed automatic transmission (AT) and comes in both 5-door 5-seat SUV and 3-door 5-seat SUV configurations. Maximum wading depth refers to the deepest water level a vehicle can safely pass through. Generally, sedans have a maximum wading depth not exceeding 30 cm, while SUVs can handle deeper water but should ideally not exceed 50 cm. Among common models: GAC Trumpchi GS8 has 30 cm, Audi A4 has 32 cm, Volkswagen Sagitar has 30 cm, Land Rover Range Rover has 90 cm, Jeep Compass has 48 cm, and Highlander has 45 cm. SUVs clearly outperform sedans in wading capability. Generally, when driving through water, different precautions should be taken based on depth and vehicle characteristics: When water reaches exhaust pipe level: Relatively safe. Even if water enters the exhaust, internal pressure can expel it. Just avoid stalling in water to prevent backflow. When water reaches door sill level: More dangerous. Most electrical components and sensors are located at the vehicle's base, risking short circuits that may damage critical systems and prevent startup. When water reaches air intake level: Extremely hazardous. Driving through such conditions may cause immediate engine stall, potentially resulting in permanent engine damage or complete failure.
113
Share

How to Check the Mileage on the Audi Q2L Dashboard?

The Audi Q2L odometer is divided into total mileage and trip mileage. The trip mileage can be manually reset to zero using the reset button. There are two buttons in the middle of the dashboard. Pressing the left button displays the total mileage, while pressing the right button shows the trip mileage. Additional relevant information is as follows: 1. Trip Mileage: This can be used to record the distance traveled from point A to point B, and it can also assist in calculating fuel consumption and new maintenance intervals. 2. Total Mileage: This records the cumulative distance the vehicle has traveled from the factory to the present. 3. In principle, the total mileage cannot be reset: Manufacturers do not set a corresponding button for the car because the total mileage provides information about the vehicle. The factory mileage, maintenance mileage, and when selling the car, all require checking the total mileage. If you must reset it, you can replace the odometer or go to an auto parts store to adjust the total mileage data using specialized equipment. 4. Clearing the car's mileage: The total mileage cannot be reset, only the trip mileage allows resetting. The dashboard will have a toggle key for total mileage and trip mileage. Switch to trip mileage and hold the toggle key for 3 seconds to reset it.
115
Share

What does Audi TFSI mean?

TFSI stands for T+FSI, where T represents turbocharging, and FSI represents direct fuel injection. The number preceding TFSI indicates the standard acceleration time from 0 to 100 km/h. For example, 30TFSI is approximately 9.35 seconds; 40TFSI is 7.6 seconds; 45TFSI is around 6.5 seconds, and the highest, 50TFSI, is 6 seconds. More extended information is as follows: 1. TFSI is T+FSI: T stands for turbocharging, and FSI is the abbreviation for Fuel-Stratified-Injection, which means fuel stratified injection technology in Chinese. It represents a future direction for engine development. Fuel stratified injection technology is a type of lean-burn technology for engines. 2. Lean burn: This means the gasoline content in the engine's air-fuel mixture is low, with a gasoline-to-air ratio that can reach 1:25 or higher. FSI can directly inject fuel into the combustion chamber, reducing the engine's heat loss, thereby increasing output power and reducing fuel consumption, which benefits both fuel economy and performance. 3. Characteristics of the high-pressure fuel pump: The Volkswagen FSI engine uses a high-pressure fuel pump to deliver gasoline through a split rail (common rail) to electromagnetically controlled high-pressure injectors. Its feature is that a variable vortex is already generated in the intake tract, forming the optimal vortex pattern for the intake flow to enter the combustion chamber, pushed in a stratified filling manner, concentrating the mixed gas around the spark plug located at the center of the combustion chamber. This allows the lean-burn technology to achieve a mixture ratio of over 25:1, which cannot be ignited under normal circumstances, necessitating a stratified combustion approach from rich to lean. Through the movement of air within the cylinder, a rich mixture that is easy to ignite forms around the spark plug, with a mixture ratio of about 12:1, gradually thinning out towards the outer layers. Once the rich mixture is ignited, combustion rapidly spreads to the outer layers.
118
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.