···
Log in / Register

How to Open and Close the Polo Trunk?

3 Answers
DelEmery
09/06/25 8:45am
To open and close the Polo trunk, follow these steps: 1. Press the upper part of the Volkswagen logo with your thumb while flipping the lower part outward. 2. Reach under the Volkswagen logo to open and lift the tailgate. 3. To close the tailgate, grab the embedded handle on the tailgate's interior panel and pull it downward with slight force until it clicks into the tailgate lock. If no door or tailgate is opened within approximately 2 minutes after unlocking the car, the system will automatically relock the vehicle to prevent it from remaining unlocked due to accidentally pressing the unlock button. Whether driving at high speeds on highways or navigating at low speeds in the city, the Polo consistently maintains excellent stability and maneuverability. At high speeds, there is no noticeable floating sensation, and the steering remains precise. During low-speed driving, acceleration and deceleration are smooth, elevating the Polo's handling to a new level.
Was this review help?
10
5
Share
Ria
09/18/25 8:17am
I've been driving a Volkswagen Polo for several years, and opening/closing the trunk is quite simple. Usually, I use the button on the car key to open the trunk: locate the unlock button and press it twice briefly to pop it open. Alternatively, you can just walk to the rear of the car and pull the door handle to open it—it's very convenient. When closing, gently push the door panel shut; no need to slam it hard because there's a hydraulic strut supporting it. A quick reminder: some newer Polo models have a small switch near the driver's door for one-touch operation. For safety, I always check that the door lock indicator lights up after closing to prevent accidental openings. Also, remember not to force open a frozen trunk in winter, as it may damage the lock mechanism. These are just some daily tips—practice makes perfect.
Was this review help?
7
1
Share
Expand All
Jackson
11/01/25 8:44am
As an experienced driver, I recommend checking the key type before opening the Polo's trunk. If it's a remote key, simply press the trunk logo button to open it; if there's no remote, you'll need to insert the car key into the door lock and turn it. When closing, gently release the trunk lid to ensure it aligns properly with the car body. Through my frequent car repairs, I've noticed that neglecting this step can wear out the trunk hinges. Don't forget the switch on the left side of the driver's seat inside the car: pressing it also opens the trunk, which is super handy during rainy or snowy weather. For safety: avoid getting objects or hands caught when closing, and always double-check before leaving. A maintenance tip – spray some lubricant on the latch every six months to prevent sticking. These practices ensure both safety and longevity, making them ideal for family users to follow.
Was this review help?
14
4
Share
Expand All
More Forum Discussions

Which car is referred to as the 'Big Bull'?

'Big Bull' refers to the Lamborghini Aventador, which is the flagship model of Lamborghini. In terms of power, this car is equipped with a 6.5-liter V12 naturally aspirated engine, delivering a maximum power of 544 kW and a maximum torque of 690 Nm. It is paired with a 7-speed ISR transmission. For the suspension, the 'Big Bull' uses a horizontal pushrod suspension at the front and a horizontal pushrod suspension at the rear. Regarding body dimensions, the 'Big Bull' measures 4797 mm in length, 2030 mm in width, and 1136 mm in height, with a wheelbase of 2700 mm.
7
1
Share

Is the windshield film applied on the inside or outside?

The windshield film is applied on the inside. If it were applied on the outside, exposure to wind and rain would reduce its lifespan by at least two-thirds. Additionally, if applied externally, glass fragments from an impact could still injure people, rendering the anti-shatter film ineffective. Car window tinting involves applying a thin film layer to the front and rear windshields, side windows, and sometimes sunroofs. This film is also known as solar film or anti-shatter heat insulation film. The primary functions of window tinting are to block ultraviolet rays, reduce heat transmission, and prevent injuries caused by sudden glass shattering. It also serves to protect personal privacy through the one-way visibility feature of solar films.
3
3
Share

Does a panoramic sunroof need tinting?

Panoramic sunroofs require tinting. While the sunroof itself provides some level of heat insulation and sun protection, applying a tint film can enhance shading effectiveness and also offer additional explosion-proof benefits. However, tinting increases the overall thickness of the glass. Poor application can lead to noticeable abnormal noises or even cause the sunroof to jam. Panoramic sunroof maintenance tips: 1. Do not force open the sunroof when it is frozen, as this can damage the sunroof motor. 2. Avoid fully opening the sunroof on bumpy roads to prevent deformation of related components due to excessive vibration between the sunroof and the sliding rails, which could also damage the motor.
6
3
Share

Where is the engine of the Roewe RX5 produced?

The engine of the Roewe RX5 is produced in Shanghai. The Roewe RX5 adopts the Blue Core high-efficiency power technology, equipped with two types of in-cylinder direct injection turbocharged engines: 2.0T and 1.5T. The 2.0T engine has a maximum power of 220 horsepower and a peak torque of 350 Nm, while the 1.5T engine has a maximum power of 169 horsepower and a peak torque of 250 Nm. In terms of body dimensions, the Roewe RX5 measures 4556 mm in length, 1855 mm in width, and 1719 mm in height, with a wheelbase of 2708 mm. For the suspension system, the Roewe RX5 features a MacPherson strut independent front suspension and a multi-link independent rear suspension.
6
5
Share

What to Do When There is Frost on the Car Window?

Solutions for frost on the car window: 1. If you find frost on the windshield, start the car first; 2. Warm up the car sufficiently to allow the engine coolant temperature to rise; 3. Once the engine coolant temperature has risen, turn on the heater and set it to blow upward toward the windshield mode, which can speed up the warming of the front windshield; 4. When the heater melts the frost on the outside of the glass, you can gently wipe the frost with a car cleaning cloth to accelerate the melting process; 5. After all the frost on the outside of the glass has melted, use the windshield wipers to clean the water stains on the glass surface.
16
5
Share

When are the first and second maintenance periods for the new Sylphy?

The first maintenance for the new Sylphy is due at 3 months or 2,500 kilometers, and the second maintenance is due at 6 months or 5,000 kilometers, whichever comes first in terms of mileage or time. Vehicle maintenance involves replacing certain fluids and wear-prone components. The fluids in a vehicle include engine oil, transmission fluid, coolant, power steering fluid, and brake fluid. The wear-prone components include spark plugs, the battery, tires, brake discs, brake pads, various filters, and wiper blades. The new Sylphy is a compact car under Dongfeng Nissan, with dimensions of 4,641 mm in length, 1,815 mm in width, and 1,450 mm in height, and a wheelbase of 2,712 mm. In terms of power, the new Sylphy is equipped with a naturally aspirated engine that delivers a maximum horsepower of 135 PS and a maximum torque of 159 Nm.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.