How to Obtain Physical Examination Information for Driver's License Renewal on Traffic Management 12123

1 Answers
LaSpencer
07/28/25 7:03pm
Go to the designated hospital for a physical examination, and the hospital will upload the examination information. Enter "physical examination" in the search field and search. Click to submit the physical condition certificate and select the driver's license type to obtain the physical examination information.
Was this review help?
17
4
Share
More Forum Discussions

What is the difference between 1.5t and 1.5l?

The differences between 1.5t and 1.5l are: 1. Different engine types: 1.5t refers to a 1.5-liter turbocharged engine; 1.5l refers to a 1.5-liter naturally aspirated engine. 2. Different power outputs: For vehicles with the same displacement, the power of a turbocharged engine is 1.3 times that of a naturally aspirated engine. 3. Different working principles: The 1.5t engine generates exhaust gases during operation, which drive the turbine, increasing the intake air volume and making cylinder combustion more efficient, thereby reducing fuel consumption and increasing vehicle horsepower. The 1.5L naturally aspirated engine mainly relies on the downward movement of the piston, providing smooth power output and direct response.
3
5
Share

Can I Get a Car Loan Without a Driver's License?

You can get a car loan without a driver's license. In the process of applying for a car loan, there are currently no regulations that require you to have a driver's license to apply for an auto loan. As long as the borrower has complete documentation and meets certain loan requirements, they can apply for an auto loan. A driver's license (full name: motor vehicle driver's license), also known as a driving license, is a document issued by the government's transportation department to individuals who are qualified to drive, usually in the form of a card. To obtain a driver's license, you need to meet the minimum age requirement and pass a driving test. The driver's license usually specifies the types of motor vehicles the holder is allowed to drive, such as motorcycles, passenger cars, trucks, buses, etc.
14
2
Share

How to Remove the Speed Limit on an Electric Vehicle?

Steps to remove the speed limit on an electric vehicle: 1. With the electric lock turned off, hold the brake lever; 2. Turn the throttle to its maximum position, then turn on the power; 3. While holding the brake lever, repeatedly turn the throttle to its maximum limit; 4. Keep the throttle turned to its maximum for a few seconds to remove the speed limit. An electric vehicle, also known as an electric-driven vehicle, is primarily divided into AC electric vehicles and DC electric vehicles. Electric vehicles use batteries as their energy source, converting electrical energy into mechanical motion through components such as controllers and motors, and control the speed by adjusting the current. The first electric vehicle was manufactured in 1881, a three-wheeled vehicle powered by a lead-acid battery and driven by a DC motor.
18
3
Share

How to Adjust the Tightness of Disc Brakes?

Methods to adjust the tightness of disc brakes: 1. There is a red plastic disc near the spokes; turning this plastic disc can adjust the tightness. 2. Adjust the tightness width via the screw on the brake caliper. 3. It is recommended that car owners go to a 4S shop or repair shop for adjustment. Disc brakes consist of a brake disc connected to the wheel and a brake caliper at the edge of the disc. When braking, high-pressure brake fluid pushes the brake pads to clamp the brake disc, creating a braking effect. The main advantages of disc brakes include rapid braking at high speeds, better heat dissipation than drum brakes, consistent braking performance, and ease of installing advanced electronic devices like ABS. Metal blocks are used instead of drums, with flat brake shoes on both sides of the brake disc. When the brake master cylinder sends oil pressure to the sub-cylinder, the brake shoes clamp the brake disc to achieve the braking effect.
19
0
Share

Does Crossing the Front Wheels Over the Line but Not the Rear Wheels Count as Running a Red Light?

No. If the front wheels of the vehicle have just crossed the stop line when the light turns red and the vehicle stops immediately without moving, it will not be considered running a red light. However, if the vehicle continues to proceed in violation of the rules, it will be deemed as running a red light. According to Article 90 of the new traffic regulations: driving a motor vehicle in violation of traffic signal lights will result in a 6-point deduction and a fine of 200 yuan. If the vehicle completes crossing the line and continues to move until it fully crosses the line before stopping, thereby affecting the passage of other vehicles and pedestrians, it will be penalized under Article 3, Section 7 of the Road Traffic Safety Law: violating prohibition signs will result in a 3-point deduction and a fine of 100 yuan. Crossing the stop line can be divided into two scenarios: the front wheels of the vehicle crossing the stop line, or the entire vehicle crossing the stop line. The Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China, Article 38, states: motor vehicle signal lights and non-motor vehicle signal lights indicate: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not obstruct the passage of straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue to proceed. When the red light is on, vehicles are prohibited from proceeding. When the red light is on, right-turning vehicles may proceed provided they do not obstruct the passage of other vehicles or pedestrians. At intersections without non-motor vehicle signal lights or pedestrian crossing signal lights, non-motor vehicles and pedestrians should follow the indications of the motor vehicle signal lights. The new traffic regulations clearly define three necessary conditions for a vehicle to be considered running a red light: The vehicle illegally crosses the stop line. The vehicle illegally enters the intersection. The vehicle illegally crosses the opposite stop line. Running a red light can be determined with just three photos: A photo showing the front wheels of the vehicle not crossing the stop line when the red light turns on, a photo of the vehicle passing through the middle of the intersection, and a photo of the vehicle reaching the opposite road. These three clear photos can prove the vehicle's movement trajectory after the red light turns on, thereby confirming the act of running a red light. While driving, pay attention to the following three situations: If the front wheels of the vehicle cross the stop line, or if both the front and rear wheels cross the stop line but the rear of the vehicle has not fully crossed the stop line, and the vehicle stops immediately, traffic police will not penalize it as running a red light. However, they may penalize it for crossing the stop line. If the front wheels of the vehicle cross the stop line, regardless of whether the entire vehicle has fully crossed the stop line, and the vehicle stops and then reverses back, being captured by electronic surveillance with two complete movement images, it will be treated as running a red light, resulting in a 6-point deduction and a fine of 200 yuan. If the entire vehicle fully crosses the stop line and stops or continues to move forward, and within one red light cycle, electronic surveillance captures three complete images constituting the three necessary conditions for running a red light, regardless of whether the vehicle reaches the intersection or crosses the opposite stop line, it will be treated as running a red light and penalized accordingly.
20
0
Share

What materials are needed for Subject 4?

The materials required for Subject 4 include the original ID card (a temporary residence permit is also needed for non-local residents) and 7 photos (6 photos for local residents, all in 1-inch color photos with a white background). Verification of information: After sitting down, first verify the examinee information. If it does not match your details, check if it is your seat. If not, find your correct seat. If the seat is correct but the information is wrong, report it immediately. Observing examination room discipline: During the Subject 4 exam, observe the examination room discipline. If you make loud noises during the waiting period, you will be directly expelled and disqualified from the exam that day. Following instructions: Follow the staff's instructions. Raise your hand if you have any questions, and don't hesitate to ask the examiner if you don't understand something. Adjusting the camera position: Adjust the camera position to focus on the upper 1/3 of your face and chest. If your face does not appear within the monitoring range, your score will be invalidated.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.