How to match the tire pressure monitoring system on the Vision X6?

1 Answers
Serena
07/30/25 2:30am
The matching method for the tire pressure monitoring system on the Vision X6 is: 1. Press the square icon button on the left side of the steering wheel; 2. Switch to the tire pressure detection screen; 3. Hold down the triangular icon button. The Vision X6 is a compact SUV under Geely, with body dimensions of: length 4546mm, width 1834mm, height 1715mm, and a wheelbase of 2661mm. It features a MacPherson strut independent suspension at the front and a multi-link independent suspension at the rear. The Vision X6 is equipped with a 1.4T multi-point fuel injection turbocharged engine, delivering a maximum power of 104kW and a maximum torque of 235Nm, with the maximum power achieved at 5200 rpm. It is paired with a 6-speed manual transmission.
Was this review help?
20
5
Share
More Forum Discussions

How to Repair a Battery?

There are numerous methods to repair lithium batteries, and the following are detailed methods and introductions: 1. Repair method for electric vehicle lithium batteries: Use a lithium battery balance repair instrument to test the battery voltage, discharge, and voltage difference to identify which part or which battery is damaged, causing the entire battery pack to malfunction. 2. Repair method for mobile phone lithium batteries: Use a clean eraser or other cleaning tool to gently wipe the metal contacts on the lithium battery and the metal contacts on the phone, which helps maintain good charging conditions and prolonged power durability.
17
1
Share

How is the Buick Velite 7?

Buick VELITE-7 is the first all-electric SUV model under the SAIC-GM Buick brand. Here are the detailed introductions: 1. Introduction: The Buick Velite 7 is a key move in Buick's strategic layout of 'electrification, connectivity, intelligence, and sharing'. It incorporates GM's global expertise and cutting-edge technological advantages in the R&D, design, manufacturing, and certification of new energy vehicles and three-electric technologies. Equipped with high-performance LG power batteries, it boasts an NEDC range of 500 kilometers. As Buick's first global all-electric SUV, the new model features Buick's latest SUV design style and outstanding space performance. It comes with the latest iteration of intelligent connectivity technology and smart driving assistance functions. Combined with SAIC-GM's comprehensive 'intelligent manufacturing' system and service guarantees, it aims to set a new value benchmark for mainstream joint-venture brand all-electric SUVs. 2. Exterior: The new SUV and new energy vehicle design language endows the Buick Velite 7 with a dynamic and robust SUV stance, a modern and elegant interior style, and a spacious and comfortable cabin that surpasses its peers. Buick's signature wing-shaped three-dimensional grille features light-guide LED material on the wing-shaped trim on both sides of the logo, seamlessly integrated with the boomerang-style front LED light-guide daytime running lights.
4
0
Share

What does the car menu mean?

Car menu button means menu key. Press the menu button to open the corresponding function selection interface menu. Here is the relevant information: 1. The menu button on the multifunction steering wheel, each press will switch a menu page on the dashboard information center, and you can make corresponding adjustments according to your selection. 2. The functions of the car menu button include the adjustment of treble, midrange and bass of ordinary audio, the adjustment of surround speakers, the adjustment of left and right sound fields, and sound effect settings. It also includes the adjustment of the sound field strength of the front and rear rows unique to car audio, and the selection of multiple sound source inputs.
14
2
Share

How to adjust the audio equalizer for BYD Song?

BYD Song audio equalizer adjustment: Set the bass value to 8-9, midrange value to 2-3, and treble value to 5-6. When adjusting car audio, you can first turn off the midrange and treble of the front and rear channels, and listen to the subwoofer separately. Adjust the crossover, mechanical noise, and subwoofer ratio based on the sound. Then, reduce the volume of the rear channels and test the subwoofer again. The main components of car audio are the head unit, amplifier, and speakers. When purchasing, pay special attention to the performance of these three parts. The most direct way to judge the quality of the head unit is to look at its technical specifications. Below are the criteria for evaluating the head unit: 1. Output power: Most head units indicate music power, typically between 40W~60W. The power should not be too high. 2. Frequency response: The human ear can hear frequencies between 20Hz~20KHz, so this specification should at least cover this range, and the wider, the better. 3. Signal-to-noise ratio (SNR): This refers to the ratio of music signal to noise. High-end car audio systems usually have an SNR of 90DB or higher. The higher the value, the better. 4. Total harmonic distortion (THD): This indicator reflects the fidelity of sound reproduction. The lower the value, the higher the fidelity, and the better the audio effect.
9
5
Share

What are the disadvantages of disabling Superfetch?

After disabling Superfetch, the system needs a period to record user usage habits upon restart, requiring some waiting time before Superfetch can restore its optimal acceleration effects for the system. Below is relevant information about Superfetch: 1. Side effects of disabling Superfetch: May cause memory usage to nearly reach full capacity, and if memory usage exceeds limits, program operations will inevitably experience lag; 2. Definition explanation: Superfetch operates silently in the background, continuously analyzing RAM usage patterns and identifying the types of applications most frequently run. Over time, Superfetch marks these applications as frequently used and preloads them into RAM in advance.
10
2
Share

Is it normal for water to drip from the edges of the sunroof?

It is normal for the sunroof seal to have slight water seepage. If the sunroof seal is severely damaged, excessive water ingress may occur, and if the drainage pipe cannot discharge it in time, it may overflow into the cabin. In such cases, it is necessary to visit a 4S shop to check the cause of the fault and carry out repairs. Below is an introduction to sunroof leakage issues: 1. Dust and debris inside the sunroof track: The sunroof drainage pipe gets clogged, and excessive rainwater cannot be drained, seeping into the cabin through the sunroof waterproof seal. This issue can usually be resolved by using a thin wire to unclog the drainage pipe. 2. Deformation of the sunroof sliding track: Track deformation is generally caused by movement obstruction, where the motor forces the track to move back and forth, causing it to stretch and deform. This results in the sunroof glass not closing properly, allowing rainwater to enter the cabin. If there are no separate track components available, the entire sunroof frame assembly must be replaced. 3. Breakage of the sunroof lift arm: When the sunroof slides to the front and closes, if the lift arm is broken, the sunroof cannot rise to be flush with the roof, creating a depression. Rainwater then leaks into the cabin along the edges of the sunroof. This also requires replacing the entire frame assembly to resolve. 4. Aging of the sunroof waterproof seal: Especially in vehicles over 10 years old, the aged seal cannot form a tight seal with the roof, allowing rainwater to seep into the cabin. The solution is to replace the roof seal or the sunroof glass with a new seal.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.