How to Manually Reset the Maintenance Light on a Haval H6?
3 Answers
Here is the relevant introduction for resetting the maintenance light on a Haval H6: 1. Turn off the ignition switch, press and hold the trip meter reset button on the instrument cluster, then turn on the ignition switch. The odometer display will begin a countdown. When the display shows 0000.0, release the button. At this point, the wrench indicator light on the instrument cluster, which signifies maintenance, should turn off. 2. Use an automotive computer to reset it, or visit a 4S shop to have it reset with a diagnostic tool. The SERVICE indicator on the instrument panel is the maintenance cycle indicator. When the ignition switch is in the ON position, the SERVICE indicator will flash, and it will disappear after starting the engine, indicating that the vehicle requires maintenance. After maintenance, the maintenance light should be reset. Once the maintenance light is reset, it begins recording the driving mileage and will prompt when the next maintenance mileage is reached. If not reset, it cannot record the maintenance mileage, which may be detrimental to the vehicle.
I'm a veteran driver with over 30 years of experience and know all about car maintenance. Resetting the maintenance light on a Haval H6 manually is quite simple—just follow these steps and you can't go wrong: First, turn off the engine and remove the key, letting it rest for a few minutes. Then, insert the key and turn it to the ACC position (without starting the engine). Next, press and hold the INFO or MODE button on the steering wheel for about five seconds. You'll see the maintenance light on the dashboard start flashing, indicating it's ready to reset. As soon as the light goes off, release the button—done! I use this method after every maintenance session, and it's always reliable. Don't forget, the maintenance light is a helpful reminder to change the oil or check the brakes. Skipping this step could lead to potential issues. I also recommend regularly checking your car's condition, like monitoring oil levels, to extend its lifespan and save on repair costs. Learning to reset the light manually means you can do it at home—saving time, money, and giving you peace of mind.
As a new Haval H6 owner who just picked up the car last year, I don't panic at all when the maintenance light comes on. Manual reset is super easy: First, sit in the driver's seat, turn the key to the ON position (don't start the engine), use the buttons on the right side of the steering wheel, lightly press the MODE or OK button to navigate to the menu options on the dashboard, find the "Service Information" section, select "Reset Maintenance" after entering, and then confirm. The whole process takes less than half a minute, and the light goes off smoothly. I was a bit nervous during my first attempt, but found it incredibly simple afterwards - no need to visit the 4S shop at all. Not only does it save money, but you also learn more about your car. By the way, don't slack off after resetting the maintenance light; get the service done promptly. Check around every 5,000 kilometers to ensure engine health and avoid roadside issues. Developing this habit makes driving safer and extends your car's lifespan.
