How to Lift Up the Wiper Blades on a Sylphy?

How to Reset the Smart Maintenance Light?

Turn on the vehicle's power and use the multifunction button on the left to locate the vehicle's maintenance information. Adjust to display the vehicle's mileage data, then press and hold the OK button for 20 seconds. After the maintenance information on the dashboard starts flashing, press and hold the RES button, and the vehicle's maintenance light will be reset.

12

5

Share

How to Find the Starting Point on a Slope?

The right front and rear wheels of the vehicle should be within 30 centimeters of the side line. There is usually an arrow on the slope's surface that you can use as a guide; align your vehicle with the arrow's position and drive up. It is essential to ensure that the vehicle's front bumper is positioned in the middle of the yellow line for the designated parking spot, and the bumper must not extend beyond or fall short of the yellow line by more than 50 centimeters. After completing the maneuver, descending the slope is straightforward. Try to stay as close to the center as possible, fully release the clutch, and only lightly apply the brakes.

17

5

Share

How to Self-Rescue When a Motor Vehicle Accidentally Submerges and the Doors Cannot Be Opened?

"When a motor vehicle accidentally submerges and the doors cannot be opened, the first thing to do is to stay calm. The fastest self-rescue method is to break the side window glass, so it is essential to have a safety hammer in the vehicle. The moment the vehicle accidentally submerges, the safety hammer can effectively shatter the window, allowing for the quickest possible escape. If the vehicle accidentally submerges, due to water pressure, the doors will inevitably be unable to open. The first response should be to stay calm, avoid panic, and refrain from hastily unbuckling the seatbelt. Utilize the precious time before the cabin is completely submerged to quickly determine the direction of the water surface. Generally, the direction with brightness is the water surface direction. At this point, quickly roll down the window to let water enter the vehicle. Once the water fills halfway, and the internal and external water pressure equalizes, swiftly unbuckle the seatbelt and open the door to escape. When the driver urgently breaks the window to escape, the first choice should be to shatter the side window. The front windshield is thicker and often made of laminated glass, making it difficult to break. Even if shattered, it does not easily form a large enough escape opening quickly. In contrast, the side window glass is thinner and easier to break compared to the front windshield. Additionally, when breaking the window, aim for the edges or corners of the glass for more effective results."

5

4

Share

What are the regulations for using temporary vehicle license plates?

Temporary vehicle license plate usage regulations: 1. Validity period: Temporary plates have a limited validity period, not exceeding 30 days at maximum. For new vehicles, the validity period cannot exceed 15 days. Therefore, vehicle owners must apply for formal license plates from the vehicle management authority within this period; 2. Regional restrictions: If it's a local temporary plate, it can only be used within the local area. The paper motor vehicle license plate that permits temporary road use of motor vehicles, also known as a temporary driving license plate, refers to the temporary vehicle driving certificate issued by the public security vehicle management department to vehicle owners before the new vehicle is officially registered.

13

2

Share

How to Clean Adhesive from Car Glass?

Methods for cleaning adhesive from car glass are: 1. Use professional adhesive remover or adhesive cleaner to clean without damaging the car body; 2. Dip a cotton swab in vinegar or essential balm and evenly apply it to the adhesive, then scrape back and forth repeatedly. Over time, this can also remove the adhesive from the car glass. Car glass is produced by heating the glass in a furnace to near its softening temperature, then quickly transferring it to air grids with different cooling intensities for uneven cooling. This creates varying stresses between the main viewing area and the peripheral areas of the glass. Generally, glass produced this way is zone-tempered glass.

13

0

Share

What is the tire model specification for the Mercedes-Benz E300?

The tire model for the Mercedes-Benz E300 is 245/45R18, where 245 represents the section width, 45 is the aspect ratio, R stands for radial tire, and 18 indicates the diameter. The dimensions of the Mercedes-Benz E300 are 4942mm in length, 1860mm in width, and 1455mm in height, with a wheelbase of 2939mm. The E300 features a turbocharged intake system, is equipped with a 9-speed automatic transmission, and is a 4-door, 5-seater sedan. It has a maximum power output of 135kW, a maximum torque of 280Nm, with the maximum power achieved at 5800 to 6100 rpm and the maximum torque available from 3000 to 4000 rpm.

20

2

Share

How to Lift Up the Wiper Blades on a Sylphy?

How to Reset the Smart Maintenance Light?

How to Find the Starting Point on a Slope?

How to Self-Rescue When a Motor Vehicle Accidentally Submerges and the Doors Cannot Be Opened?

What are the regulations for using temporary vehicle license plates?

How to Clean Adhesive from Car Glass?

What is the tire model specification for the Mercedes-Benz E300?

How to Shift to Second Gear?

How to Handle Vehicle Scrapping When Selling as Scrap?

How to Check the Car Chassis by Yourself?

How to Get Rid of Cockroaches in the Car?