···
Log in / Register

How to Lift Up the Rear Seat of the Excelle?

3 Answers
AngelaMarie
07/30/25 12:51am
Method to lift up the rear seat of the Excelle: 1. Push the seatback backward until it locks into the upright position. 2. When the seatback is locked in place, the red tab next to the seatback lever will retract. 3. Lift the seat upward, using both hands to apply force simultaneously. Method to fold down the rear seat of the Excelle: 1. Move the front seats forward. 2. Close the center armrest of the rear seat. 3. The safety belt buckle of the rear center seat should be stowed away. 4. Adjust the headrest to the lowest position. 5. Pull the seat folding switch located at the shoulder of the rear seat to fold it down.
Was this review help?
11
4
Share
DeLane
08/15/25 6:15am
As a new owner of an Excelle, I was a bit flustered the first time I tried to fold down the rear seats. The operation is actually quite simple: First, open the rear door, crouch down, and locate a small plastic loop at the front edge of the seat. Gently pull it upward, and the seat will release from one hook. Then, slowly lift the seat upward, allowing it to naturally lock at a certain angle. Avoid pushing or pulling too hard to prevent damaging the seat hooks. Once done, you'll see the trunk space expand, making it easier to load items or clean the car's carpets. If the seat gets stuck halfway, try gently shaking it to help it move more smoothly. When putting it back, push firmly until you hear a click to ensure it's locked. I find this a practical little trick—newcomers will get the hang of it after a few tries, avoiding mistakes in urgent situations. Remember to ensure no one is sitting in the car or that children stay clear before operating to prevent accidental injuries. Safety comes first, and it also protects the car's interior.
Was this review help?
13
5
Share
Expand All
Brayden
10/20/25 3:42am
I've been driving for over a decade, and lifting the rear seats of the Excelle is a piece of cake. Generally, there's a hidden handle at the front of the seat—just pull it to unlock the seat, then gently lift it up and it will automatically stay in place. The key is to avoid using brute force, as that can easily break the plastic components. Once lifted, the space becomes quite spacious, allowing you to fit larger items. After you're done, push the seat back into position and lock it—you'll hear a click when it's properly secured. I often use this trick for transporting items or cleaning hard-to-reach spots. Pro tip: Regularly check if the pull ring is stuck and spray some lubricant to keep it flexible. The Excelle's design is quite reliable, but always make sure the car is parked securely before operating to avoid mistakes in a rush.
Was this review help?
11
4
Share
Expand All
More Forum Discussions

Is there a domestically produced Infiniti Q50?

There is a domestically produced version of the Infiniti Q50. Below are the detailed specifications of the Infiniti Q50: 1. The domestically produced Infiniti Q50 is a model with an extended wheelbase, known as the Q50L. 2. The domestically produced Infiniti Q50 is equipped with a 2.0-liter turbocharged engine across all variants. This engine delivers 211 horsepower and a maximum torque of 350 Nm, achieving peak power at 5,500 rpm and maximum torque between 1,500 and 3,500 rpm. It features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block. The engine is paired with a 7-speed automatic transmission (7AT). 3. The Infiniti Q50L employs a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear. Both front and rear suspensions are equipped with stabilizer bars, which help reduce body roll during sharp cornering, thereby enhancing the vehicle's handling and comfort.
1
1
Share

Which country is Lotus Cars from?

Lotus Cars are categorized as follows: 1. British Lotus (also known as Lotus Cars). Lotus is a world-renowned manufacturer of sports cars and racing cars. Headquartered in Hethel, Norfolk, UK, it was founded by Colin Chapman in 1948. Currently, it is under the ownership of Malaysia's Proton (Porton) Motors and was introduced to China in 2011. 2. China's Youngman Lotus. China's Youngman Automobile Group is a comprehensive automotive industrial group that produces and sells NEOPLAN buses, MAN heavy trucks, Lotus cars, and automotive components.
15
4
Share

How to Use the Interior and Exterior Circulation in the Cavalier

The usage instructions for the interior and exterior circulation in the Cavalier are as follows: 1. The Cavalier typically operates with the interior circulation turned on. Only in areas with good air quality, such as the countryside, should the exterior circulation be activated to refresh the air inside the car. 2. The exterior circulation works by using a fan to draw outside air into the car and expel the interior air outside, achieving ventilation without opening the windows. The interior circulation simply recirculates the air inside the car, especially useful in winter when heating is on and in summer when cooling is on, to promote air circulation within the vehicle. 3. In summer, the air conditioning system relies on the compressor, so the AC button must be turned on, followed by the air conditioning. This results in higher fuel consumption when the air conditioning is in use. When the interior temperature is higher than the exterior temperature, the windshield may fog up. In this case, activating the exterior circulation can help defog the windshield. 4. In winter, the car's heating system utilizes the heat generated by the engine during operation. The engine's cooling is managed by the radiator, so the AC button does not need to be turned on to warm up the car. The correct approach is to let the car warm up for a while after starting, then turn on the heating once the water temperature rises. Initially, set it to exterior circulation to expel the cold air inside, then switch to interior circulation to warm up the car's interior.
17
0
Share

What Type of Suspension Does the Tacqua Use?

Tacqua uses a MacPherson strut independent suspension for the front suspension and a torsion beam non-independent suspension for the rear suspension. Here is some extended information on suspension types: 1. The MacPherson strut independent suspension is the most widely used suspension in the automotive world today. It mainly consists of a coil spring, shock absorber, and triangular lower control arm. Compared to other types of suspensions, this type has a relatively simple structure, smaller size, and occupies less space, making it more flexible in later use. 2. The torsion beam non-independent suspension is not very widely used in cars because this type of suspension is relatively rigid. 3. The torsion beam non-independent suspension connects the two rear wheels of the car to a single axle. While driving, if the car travels on a rough road, fluctuations on one side of the rear wheels will also cause fluctuations on the other side, affecting the comfort of the car.
12
1
Share

Where is the cabin air filter of Kaiyi C3 located?

The cabin air filter of Kaiyi C3 is located in front of the front passenger seat. The main functions of the cabin air filter are as follows: 1. It can make the air filter fit tightly to the housing to ensure that unfiltered air does not enter the cabin. 2. It can separate solid impurities such as dust, pollen, and abrasive particles in the air. 3. It can adsorb moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., in the air and has strong and long-lasting moisture adsorption capabilities. 4. It can provide fresh air to the cabin, prevent passengers from inhaling harmful gases, ensure driving safety, and effectively sterilize and deodorize. 5. It can ensure clean air in the cabin without breeding bacteria, creating a healthy environment; it can effectively separate solid impurities such as dust, core powder, and abrasive particles in the air; it can effectively intercept pollen, ensuring that drivers and passengers do not have allergic reactions that affect driving safety.
19
1
Share

How to Adjust the Headlight Height of the Murano?

Murano headlight height adjustment method is as follows:1. Turn on the high beam, stand in front of the headlight with your feet vertically as close to the headlight as possible, observe the position where the high beam shines on your feet, take the light center as the reference point, and remember it. 2. Then move vertically to the wall and mark the position of the light center on the wall according to the position on your feet. 3. Use a screwdriver to rotate the headlight's scale gear, making sure the light center shines on the marked position on the wall, with the horizontal distance not exceeding 10 cm. 4. When adjusting the lights, if there is no one else in the car, you can slightly raise the light center because an empty car is higher; when people sit in, the car will sink a bit, so adjusting the light slightly higher leaves some margin. 5. When adjusting left and right, you will notice the light center moves significantly, but when adjusting up and down, the movement is less obvious. If you don't see the light center moving up or down, don't worry, just keep turning the screwdriver until the light center shines on the marked position. 6. After both lights' centers are aligned with the marks, stand in front of the car and observe the light beam emitted by the headlights. It's easy to see at night with the high beam on—check if it's straight forward, as there might have been some deviation when marking the wall. If everything looks good, the adjustment is complete.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.