How to Lift Up the Rear Seat of the 10th Generation Accord?
4 Answers
The method to lift up the rear seat of the 10th Generation Accord: There are clips on both front sides of the rear seat where it contacts the vehicle chassis. To remove it, press downward on the top of the clips with your hand, then pull the clips forward to lift the rear seat. The battery size of the 10th Generation Accord is significantly smaller than the previous generation. The rear seats can be folded down, and the trunk space has greatly improved compared to the previous generation. The 10th Generation Accord is a vehicle launched by GAC Honda, with body dimensions of 4893mm in length, 1862mm in width, and 1449mm in height, and a wheelbase of 2830mm.
Lifting the rear seat of the tenth-generation Accord is actually quite simple. I remember feeling a bit nervous the first time I did it, but it became familiar later. There are clips on the side near the door under the rear seat—just crouch down and you'll spot them, usually metal or plastic handles. I grab them with my hand, press down firmly, and then quickly pull upward, and the entire rear seat will loosen. It's important to clear any items from the seat first, or they might get stuck. Once lifted, you can use this to clean out trash from the car or install a child safety seat. If the clips are too tight, don’t force them—apply some lubricant or pull gently with a soft cloth wrapped around them. Afterward, just gently push the seat back into place until you hear a 'click.' Doing this regularly helps keep the interior clean and reduces odors.
When operating the rear seat lift of the tenth-generation Accord, I found the key lies in locating the buckle positions. There are usually two small pull loops near the door edge of the rear seat base. I bent down and reached underneath to feel for them, then pressed downward while lifting once located. Remember to keep movements gentle throughout to avoid damaging the seat structure. Once lifted, it becomes convenient to inspect the trunk or clean debris, such as food crumbs dropped by children. Ensure no one is in the car before operation, and using a phone flashlight assists with safety in dimly lit areas. After completion, I always check if the buckles are properly reset to ensure stability while driving. This prevents rattling noises caused by loose seats and enhances daily driving comfort.
When lifting the rear seat of the 10th-gen Accord, I take extra care for safety. Gently press and slowly pull the clips at the bottom of the seat—applying too much force can damage the lumbar area or the seat itself. Always perform this operation on a flat surface with the vehicle stationary and the seat cleared. Once opened, you can perform simple maintenance like vacuuming or checking for cable aging. After completion, ensure the seat is securely fastened back in place to prevent looseness. Never rush the process to guarantee smooth operation.
