···
Log in / Register

How to License a Motorcycle in Beijing?

4 Answers
LeElle
07/24/25 10:17pm

Here are the steps to license a motorcycle in Beijing: 1. Verification: After purchasing the motorcycle, bring the invoice issued by the dealer to the Motor Vehicle Market Management Office under the Municipal Administration for Industry and Commerce to complete the verification process and obtain a verification stamp. For imported motorcycles, additional documents such as the customs import certificate or confiscation certificate, commodity inspection certificate, and relevant license application procedures provided by the dealer are required. 2. Vehicle Inspection: Similar to a health check-up for new employees, a new motorcycle must pass an inspection before receiving a license plate. Upon passing the inspection, the on-site police officer will fill out and sign the Motor Vehicle Registration Form. Required documents for the inspection include the owner's ID card, import documents, and the inspection approval form issued by the Vehicle Management Office. 3. Payment of Purchase Tax: As a high-end consumer product, the owner must also pay the purchase tax at a designated location by the traffic department. For vehicles purchased by companies, payment can be made via bank check. 4. License Plate Collection: The owner can then collect the license plate at the designated Vehicle Management Office. Required documents for license plate collection include the purchase invoice, vehicle qualification certificate, ID card and copies of the above three documents, insurance policy, purchase tax certificate, and the approved Motor Vehicle Registration Form from the inspection.

Was this review help?
7
1
Share
OJourney
08/10/25 10:06am

Having lived in Beijing for over a decade, I just got my newly purchased scooter licensed last year. It's a straightforward process but requires attention to details. First step is to prepare all documents immediately after purchase: original ID card of the owner, purchase invoice, vehicle certificate, and compulsory insurance policy - don't forget to bring copies too. Then head straight to the DMV. Note that like my Jing B license plate, it's only valid outside the 5th Ring Road with urban area access prohibited, so plan your usage accordingly. Booking online appointment beforehand is recommended to avoid long queues. On-site staff will inspect the vehicle to verify matching engine and chassis numbers. Fees including license plate processing and taxes cost around a few hundred RMB. The whole process isn't complicated, just don't miss any documents to avoid repeated trips. One more tip: if buying a used motorcycle, remember to bring the transfer agreement and previous owner's proof - cutting corners here isn't worth the trouble. Bottom line, get it done early for peace of mind; understanding Jing plate regulations prevents mistakes.

Was this review help?
7
5
Share
Expand All
VonLogan
09/26/25 6:10am

As a motorcycle newbie who just completed the registration process earlier this year, I found it less complicated than expected but with some nuances to note. After purchasing the motorcycle, promptly gather all required documents: ID card, invoice, certificate of conformity, and compulsory traffic insurance policy – keep copies handy just in case. Choosing a Jing B license plate took considerable deliberation since it's restricted to suburban riding only. The DMV visit went smoothly with light crowds; staff provided clear instructions, and the vehicle inspection covered basics like lights and horn. Fees were reasonable, and receiving the plate was genuinely exciting. Remember to consult reliable friends or forums for tips – I nearly forgot theft insurance and wasted time rectifying it later. Newcomers most commonly err with incomplete documents or wrong address entries; I recommend preparing a checklist in your phone notes for a hassle-free, safe start to riding life.

Was this review help?
12
5
Share
Expand All
LaLilliana
11/09/25 8:14am

Beijing imposes strict controls on motorcycles, and the licensing process must comply with policy regulations. First, clarify the vehicle type: fuel-powered motorcycles with Jing B plates can only operate outside the six central urban districts, while Jing A plates are extremely scarce and expensive. Required documents include ID card, purchase invoice, vehicle certification, and compulsory insurance proof, followed by submitting the application at the vehicle management office. During processing, ensure the vehicle specifications meet compliance to avoid rejection due to illegal modifications. Policies change rapidly—for instance, recent pushes for electric vehicle development haven’t significantly altered motorcycle plate standards, so staying updated on legal revisions is crucial to prevent delays. It’s advisable to verify details through official channels beforehand to ensure full compliance and avoid fines or riding bans.

Was this review help?
15
4
Share
Expand All
More Forum Discussions

Why is the 2017 Passat's center console screen unresponsive?

2017 Passat's center console screen may be unresponsive due to screen freeze or malfunction. Here's an introduction about automotive center console screens: 1. Definition: A full-touch automotive center console screen refers to a design that replaces traditional physical buttons and knobs with capacitive touch controls. Similar to smartphone screens, it responds to light touches, presses, or swipes. 2. Advantages: Full-touch center console screens significantly enhance a vehicle's technological appeal and premium feel, while adding a modern highlight to otherwise conventional interior designs, making them an important automotive component.
8
4
Share

Replacement Criteria for Sharan Brake Fluid?

Brake fluid does not have a fixed replacement standard; typically, the moisture content of the brake fluid serves as the basis for replacement. This is because moisture lowers the boiling point of the brake fluid, causing vapor to form in the lines during braking, ultimately leading to ineffective travel and making the brake pedal feel soft, thereby affecting braking performance. Most manufacturers recommend replacing the brake fluid every two years or 40,000 kilometers, although this standard is somewhat conservative. Below is additional information: Reasons for replacement every two years or 40,000 kilometers: Manufacturers recommend replacing brake fluid at intervals of two years or 40,000 kilometers as a general consideration, as they cannot precisely monitor the actual condition of the brake fluid in every vehicle sold. For instance, some vehicles are used frequently, subjected to heavy braking loads, or operate in humid environments, while others are used sparingly, experience light braking loads, or are in dry environments. Therefore, to strike a balanced approach, the recommendation of two years or 40,000 kilometers was established. If the vehicle is primarily used for commuting with little aggressive driving, there is no need to adhere strictly to the manufacturer's recommendation; simply refer to the moisture content. Brake fluid replacement criteria: When the moisture content of the brake fluid reaches 3.5%, it can be replaced. Of course, if the driving environment is merely congested urban traffic, delaying replacement slightly is acceptable. In congested urban conditions with low average speeds, frequent braking does not generate excessive heat, so replacement within a 4% moisture content is sufficient.
15
5
Share

Why can't the rear door of Mercedes-Benz GLC260 be opened from the inside?

If the rear door of a Mercedes-Benz GLC cannot be opened from the inside, it is usually due to the child lock being engaged. The owner needs to move the child lock on the side of the door in the opposite direction and turn it to the unlocked position to open the door. If the child lock is not engaged, then there might be an issue with the car, and it should be sent for repair promptly. Function of the Child Safety Lock: The child safety lock is used for the rear doors of the vehicle to prevent the danger of the doors being opened from the inside while the vehicle is moving. When this device is activated, even if the electronic central door lock is opened, the device remains in the locked state. To open the rear door, it can only be done from the outside switch when the central door lock is in the unlocked state. Solution for the Child Safety Lock: The car child safety lock, also known as the door lock child safety, is located on the rear door lock. Open the rear door, and below the lock, there is a small lever (safety mechanism). Move it toward the end with the child icon, then close the door. At this point, the door cannot be opened from the inside but only from the outside. Its purpose is to prevent active and unaware children from opening the door while the car is moving, thereby avoiding danger. In this case, the door can only be opened from the outside by an adult after the car is parked. If the rear door cannot be opened from the inside but can be opened from the outside, it is highly likely that the child safety lock is engaged. This happens when passengers in the rear seat accidentally activate the safety mechanism while getting in or out of the car. Simply reset it to resolve the issue.
16
4
Share

When can I get the license plate after selection?

Selected license plates can be obtained within 3 to 5 working days. You can submit a self-compiled license plate number on the vehicle management office website. A vehicle's license plate number serves as its identification code. Generally, blue plates represent ordinary private vehicles, yellow plates indicate regular large vehicles, white plates denote military or police vehicles, while black plates are used by foreign investors in China or important figures. License plates are metal or plastic sheets affixed to the front and rear of vehicles, typically made of aluminum, iron, plastic or paper. Their primary function is to identify the vehicle's registration region and enable tracking of ownership and registration details through the plate number.
15
4
Share

Is It Necessary to Install the BMW Fragrance System?

It is necessary to install the BMW fragrance system, as many car owners have reported excellent results. Below is an introduction to the fragrance system: 1. Function: The fragrance system can release fragrance throughout the car via a diffuser, effectively eliminating odors such as leather smells and residual smoke. Some systems also feature negative ion air purification, providing a healthy in-car environment for passengers. 2. Maintenance and Refills: The fragrance is emitted from non-woven fabric soaked in fragrance oil, which is secured in a fragrance cartridge to prevent spillage. The cartridge can be easily installed and removed from the glove compartment without any hassle. Under moderate use of one hour per day, a fragrance cartridge typically lasts about 6 months.
16
3
Share

What are the four driving modes of the Audi A8?

Audi A8 offers four driving modes: Auto, Comfort, Dynamic, and Individual. Below is a detailed introduction to these driving modes: 1. Auto Mode: The Auto mode automatically adjusts settings based on current road conditions and driving behavior. When set to Auto mode, the vehicle provides a balanced driving experience that is both comfortable and dynamic, making it particularly suitable for daily use. 2. Comfort Mode: The Comfort mode is characterized by lower engine shift points to ensure smooth gear changes, reduced cabin noise due to lower RPMs, and slightly delayed engine acceleration response. 3. Dynamic Mode: In Dynamic mode, the engine operates at higher RPMs for more direct power delivery, and the steering becomes heavier. 4. Individual Mode: This mode allows drivers to customize various parameters, typically including steering weight, suspension stiffness, throttle response, and transmission behavior.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.