How to Install the Foot Pedals on Baojun 730?

1 Answers
LeCameron
07/29/25 3:23pm
The method to install the foot pedals on Baojun 730 is as follows: 1. Open the car door and clean the installation area along the lower edge of the door frame; 2. Take out the foot pedals and distinguish the front, rear, left, and right sides based on their length and curvature; 3. Peel off the protective layer of the double-sided tape on the back of the pedals, align them with the installation area, and press firmly. The Baojun 730 is a 5-door, 7-seater MPV with body dimensions of 4780mm in length, 1780mm in width, and 1740mm in height, with a wheelbase of 2750mm. It is equipped with a 1.5T turbocharged engine and a 6-speed manual transmission, delivering a maximum power of 108 kW and a maximum torque of 250 Nm. The drive system is front-wheel drive, with a MacPherson independent suspension at the front and a torsion beam non-independent suspension at the rear.
Was this review help?
11
2
Share
More Forum Discussions

What does it mean when the EPC light comes on in a car?

The EPC indicator light can illuminate in two scenarios: during the power-on self-test and under other conditions. The power-on self-test is a diagnostic check of all vehicle sensors before driving. Typically, if the engine is not started, the light will turn off automatically after about 3 seconds. If the EPC light stays on after starting the vehicle or illuminates under other circumstances, common causes include faults in the engine intake system, throttle issues, fuel system problems, engine malfunctions, ECU control unit failures, or brake light defects. Below is a detailed explanation of other reasons for the EPC light to illuminate: Engine intake system fault: The EPC light may activate if the engine intake is obstructed or insufficient. Throttle fault: Carbon buildup is a common issue with the throttle, and dirt accumulation can also affect intake, triggering the light. Fuel system fault: Issues such as substandard fuel, fuel degradation, or poor fuel atomization can cause the light to come on. Engine fault: Insufficient engine pressure or problems with components like the intake valve may also prompt the EPC light. ECU control unit fault: Interference with the vehicle's computer signals or false alerts from the computer can trigger the light. Brake light fault: Malfunctions like non-functioning brake lights, faulty brake switches, or wiring issues can cause the EPC light to illuminate. Solutions for a lit EPC indicator: Address intake system issues, use the correct fuel grade, clean the throttle, etc. Remove carbon deposits from relevant parts. Re-flash ECU data. If the EPC light comes on, the driver can first try turning off and restarting the engine to see if the light persists. If it doesn't, the issue may have been temporary. If the light remains on or frequently illuminates, it's advisable to drive carefully to the nearest service center for professional diagnosis and repair to eliminate potential hazards. The full English name of EPC is Electronic-Power-Control, often referred to as the Engine Electronic Stability System. The EPC system includes controllers and sensors related to the powertrain. When abnormal sensor data is detected, the EPC system takes predefined actions to manage the powertrain. EPC indicator lights typically come in two colors: yellow and red. A yellow EPC light indicates a fault, but the vehicle can still be driven cautiously to a repair shop. A red EPC light signifies a serious issue, requiring immediate parking and contacting a professional for repairs. Continuing to drive with a red EPC light can damage core components or compromise safety.
1
5
Share

How Often Should Oxygen Sensors Be Replaced?

Automotive oxygen sensors do not have a fixed replacement interval. Under normal conditions, they should be replaced every 100,000 kilometers. If the oxygen sensor is damaged or fails during use, it should be replaced immediately. Methods to determine the condition of an automotive oxygen sensor include: Visual Inspection: Primarily by observing the color of the oxygen sensor to judge its condition. Normally, the tip of the oxygen sensor should be light gray in color. White, black, or brown colors indicate an abnormal oxygen sensor. Resistance Measurement Method: Unplug the sensor connector, measure the resistance between two wires, and check if it falls within the appropriate range. Automotive Diagnostic Scanner Check: Start the vehicle and warm it up. The diagnostic scanner will display the oxygen sensor's voltage fluctuating between 0V and 1V. The faster the frequency, the better the sensor. If the voltage remains at 0V, 1V, or does not change, it indicates that the sensor is malfunctioning or aged and needs replacement. The price of oxygen sensors generally ranges between 150-400 RMB, with distinctions between front and rear oxygen sensors. It is recommended that vehicle owners who choose to purchase and replace the sensors themselves select the same model from reputable manufacturers.
16
3
Share

Is It Advisable to Buy a Flood-Damaged Car?

Not advisable. Reasons are as follows: 1. Severe Component Damage: After being submerged in water and exposed to prolonged sunlight, these cars may appear fine on the surface, but internal components could be severely damaged or even malfunction. Additionally, water entering the engine can cause irreparable damage. Even if repairable, the cost would be exorbitantly high. 2. Significant Safety Hazards: These vehicles are often released into the market without thorough repairs, posing substantial safety risks. 3. Persistent Musty Odor: Following water immersion, both leather and fabric seats are extremely difficult to clean completely. Even after sun exposure, a lingering musty smell remains in the car, making prolonged occupancy highly uncomfortable.
19
5
Share

Is It Illegal to Add a Rear Wing to a Car?

Adding a rear wing to a car without approval is considered illegal and falls under unauthorized modifications. Here are the consequences of driving an illegally modified car: 1. The traffic management department will detain the vehicle, confiscate the illegal modifications, order restoration to the original condition, and impose a fine of 200 yuan. 2. For illegally modified cars, the traffic management department will not issue a safety inspection certificate. 3. The vehicle will not pass annual inspections or routine traffic checks. Here is additional information on adding a rear wing: 1. Register the modification with the vehicle management office. 2. Modify the vehicle within the bounds of regulations. 3. Take photos at the vehicle management office, and only after approval will the modification be considered legal.
20
4
Share

Where to Check the Manufacturing Date of a New Car?

Methods to check the manufacturing date of a new car: 1. Nameplate: Whether it's a new or used car, every vehicle has a nameplate that indicates the manufacturing date. The nameplate on the car clearly marks the production date of the vehicle; 2. Check the VIN (Vehicle Identification Number): The car's VIN can also reveal the manufacturing date. Methods to determine if it's a new car: 1. Brake discs: The condition of the car's brake discs can clearly indicate whether it's a new car. After driving more than 200 kilometers, noticeable marks will appear on the brake discs; 2. Tire hairs: The presence of tire hairs is not only a way to judge the condition of car tires but also a method to determine if it's a new car. New cars generally have intact tire hairs. If the car you pick up lacks tire hairs, it might indicate potential issues with the vehicle.
8
0
Share

How to adjust the valve clearance of Cruze?

There are two methods to adjust the valve clearance of Cruze: 1. Cylinder-by-cylinder adjustment method: According to the ignition sequence of the cylinders, after determining the position of a certain cylinder's piston at the compression top dead center, the intake and exhaust valve clearances of this cylinder can be adjusted. After adjustment, rotate the crankshaft and adjust the valve clearances of other cylinders step by step using this method. 2. Two-step adjustment method: Rotate the crankshaft to position the first cylinder's piston at the compression top dead center, aligning the flywheel mark with the inspection hole marking line. Cruze is a new-generation model developed by General Motors with the goal of creating a benchmark in design and performance for compact cars, integrating global resources. The models equipped with the 1.4T turbocharged engine and the 1.5L engine are labeled as '330T' and '320' respectively. This is also Chevrolet's second new car after the Equinox to adopt a three-digit number and letter naming suffix.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.