How to Install the Boyue Dash Cam?
3 Answers
The installation method for the Boyue dash cam is as follows: 1. Route the main power cable and GPS cable down the A-pillar, attach the GPS to a corner of the dashboard, and install the GPS signal receiver. 2. Open the right cover of the instrument panel to securely mount the GPS, then route the power cable along the underside of the glove compartment to the car's power socket, plug in the power, and the dash cam installation is complete. Here are some related details: 1. The Boyue dash cam draws power directly from the cigarette lighter socket, and it is recommended to install it on the car's original rearview mirror to maintain the vehicle's aesthetic appeal. 2. In terms of appearance, the front face remains the most striking feature, with a layered ripple-style grille and sharp eagle-eye headlights. The side profile adopts a popular floating roof design, while the rear features a full-bodied shape with a narrow top and wide bottom, complemented by prominent dual exhaust pipes for a bold look.
I've installed dash cams many times, and the Boyue is quite easy to work with. First, stick the dash cam to the windshield near the rearview mirror, securing it firmly with a suction cup or static cling sticker. The most crucial part is routing the wires: tuck them into the edge of the headliner, pull them along the windshield toward the A-pillar, and use a small pry tool to gently open the trim panel to hide the wires—just be careful not to block the airbag vent. For power, connecting to the cigarette lighter socket is the easiest—just plug it in. If you're using it long-term, wiring it to the fuse box looks cleaner, but make sure to check the current first and not exceed the rated value. After powering on, set the time and format, choose a high-definition camera, and adjust the angle to ensure the view doesn’t obstruct the driver’s seat. It took me about half an hour to do it myself. When adding a rear camera, avoid pulling the wires too long to keep things tidy. Since I drive out often, this thing is really useful for protecting evidence—especially since the Boyue has plenty of space, making installation flexible.
As a new car owner, installing a dash cam can be a bit overwhelming, but don't worry—take it slow. Prepare a plastic pry tool and some insulating tape, then find a discreet spot on the upper left corner of the windshield to stick it. Gently tuck the power cable along the edge of the headliner, and when you reach the A-pillar, carefully pry open the trim panel to hide the wire without damaging the clips. Plug the cigarette lighter adapter in and turn on the power to check if the light is on. The setup is simple: after powering on, press the menu button to adjust the time, date, and resolution—1080p is clear enough. Common mistakes include leaving the wire dangling or having a loose adapter; I secured the wire with tape for peace of mind. The first time I did it, it took nearly an hour because I was afraid of damaging the car's interior. I recommend doing it in the morning when the light is good to minimize errors. For the Boyue's soft plastic interior, avoid prying too hard—just press gently. After installation, clean the lens regularly to prevent dust buildup, and you'll feel much safer on the road.
