How to Handle Being Caught Drunk Driving on the Spot?

2 Answers
LeMia
07/25/25 12:34pm
The handling process for being caught drunk driving on the spot is as follows: 1. Undergo a blood test at the hospital; 2. The individual is notified to collect the blood test report; 3. The traffic police department transfers the case to the local police station at the individual's registered residence for bail pending trial; 4. The procuratorate will file a public prosecution for the drunk driving case with the local court; 5. The judicial bureau will conduct a social investigation on the individual; 6. A judgment is issued to the offender; 7. The individual retrieves the bail deposit and serves the sentence. If the blood alcohol content is less than 80 milligrams per 100 milliliters, the driver's license will be suspended for 6 months; if the blood alcohol content exceeds 80 milligrams per 100 milliliters, it is considered drunk driving, the driver's license will be revoked, the individual is barred from taking the driving test for 5 years, and a public prosecution will be initiated.
Was this review help?
17
0
Share
JustinLee
08/11/25 8:24pm
I've been through that. When caught drunk driving on the spot, the police will first conduct a breathalyzer test to confirm alcohol levels. Stay calm and cooperate without resistance, or things could get worse. If the test exceeds the limit, they'll issue an immediate penalty: deduct 12 points, fine you 1,000-2,000 yuan, and suspend your license for six months. You might then be taken to the police station for questioning or further blood tests. Remember, don't try lying or pleading for leniency—the law is strict. Later, you'll need to attend traffic safety classes and pay all fines before getting your license back. This experience taught me a lesson: never take chances. Taking a taxi home after drinking is the smart choice—don't endanger yourself or others. Countless accidents every year stem from drunk driving, harming both the perpetrator and victims.
Was this review help?
8
4
Share
Expand All
More Forum Discussions

What is the reason for the motorcycle electronic speedometer not working?

Motorcycle electronic speedometer not working is caused by a damaged speedometer gear, and replacing the speedometer gear can solve the problem. Inspection method: Remove the speed cable fixing nut under the speedometer and pull out the speed cable, then lift the front wheel and rotate it to see if the speed cable rotates along with it. If it rotates, it indicates a problem with the dial, possibly due to a broken or loose reduction gear inside the dial. Since there are no separate speedometer dials available for sale, the entire assembly must be replaced. After-sales repair: If it does not rotate, it means the speed cable may be broken or the counting claws inside the front axle are excessively worn. Take it to after-sales service for repair. Other reasons: A loose screw cap at the speedometer port can also cause this issue, and tightening it can solve the problem.
15
1
Share

What is the Scrapping Period for Small Vehicles?

Small vehicles do not have a mandatory scrapping period, but after exceeding 15 years, they must undergo inspection twice a year. Vehicles that fail the inspection will be forcibly scrapped. The vehicle scrapping period refers to a safety inspection system based on the number of seats and usage duration during a car's service life. The scrapping process for small vehicles is as follows: 1. The vehicle owner applying for scrapping and renewal must fill out and stamp a form; 2. Apply at the registration and acceptance counter, where a scrapping notice will be issued for vehicles that have reached the scrapping period; 3. The owner selects a qualified recycling company to dismantle the vehicle as per the notice; 4. The recycling company verifies the notice, dismantles the vehicle, and takes photos; 5. Submit the change form, vehicle technical appraisal form, recycling certificate, and dismantling photos to the motor vehicle inspection counter for verification and approval, then proceed with scrapping registration.
1
4
Share

What is the reason why a new car does not consume urea solution?

New cars do not consume urea solution for the following reasons: Engine failure: Check the current fault codes of the engine's aftertreatment system and troubleshoot them one by one. Service station diagnostic tools can be used to check the relevant codes. Poor contact: Check whether the aftertreatment wiring harness and sensors are in normal contact. If there are wiring issues, make adjustments and repairs promptly. Urea pipeline: Check whether the urea pipeline is normal and there is no leakage; check whether the urea pump is working properly, and if there is any abnormality, investigate the cause of the fault; check whether the urea nozzle is working properly. If the nozzle is clogged or cannot open normally, troubleshoot and repair it in time.
19
5
Share

How Many Days Does It Take to Check Vehicle Violations?

Vehicle violations can usually be checked within 3 to 7 days. However, if the violation is recorded by surveillance equipment, it may take up to 15 days to appear. Below are the methods for handling traffic violations: Traffic Police Violation Handling Window: Bring the vehicle's registration certificate, driver's license, and ID card to the traffic police violation handling window for processing. Bank Processing: Take the violation notice issued by the traffic police to the designated bank to pay the fine. Payment must be made using a bank card under the vehicle owner's name. Online Vehicle Management Office: Register and process the violation on the local online vehicle management office website. 12123 Platform Processing: Open the 12123 App, where the number of violations and points deducted will be displayed. Click on the details to view specific information about the violation, including location, time, photos, fines, and points deducted. Select the violation to be processed, then click 'Next' to proceed with handling and payment.
8
2
Share

What is the actual fuel consumption of the Fengyun 2 manual transmission?

The actual fuel consumption of the Chery Fengyun 2 manual transmission is: 5.9L/100km. The Fengyun 2 is a small hatchback produced by Chery Automobile, and as of August 2019, the Fengyun 2 has been completely discontinued. The following is a related introduction to the Chery Fengyun 2: In terms of power: The Fengyun 2 is equipped with a 1.5-liter naturally aspirated engine, with a maximum horsepower of 109 hp, a maximum power of 80kw, and a maximum torque of 140N.m. In terms of transmission: The Fengyun 2 uses a 5-speed manual transmission. In terms of suspension: The front suspension of the Fengyun 2 is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension. In terms of tire specifications: The front and rear tires of the Fengyun 2 are both 185/60R15.
17
0
Share

Can the steering wheel weight of a car be adjusted?

The weight of a car's steering wheel can be adjusted. The function of the steering wheel is to convert the force applied by the driver to the edge of the steering wheel into torque and then transmit it to the steering shaft. The reasons for a heavy steering wheel include: 1. Insufficient power steering fluid; 2. Contaminated power steering fluid; 3. Malfunction of the power steering system; 4. Low tire pressure; 5. Toe-in malfunction; 6. Faults in the steering gear or power steering pump; 7. Overly tight bearing fit. Precautions for operating the steering wheel are: 1. When turning the steering wheel back, do it quickly and accurately to return to the correct position; 2. Do not apply excessive force when turning the steering wheel; 3. When driving in hazardous mountainous areas or on poor road surfaces, hold the steering wheel with both hands to prevent accidents; 4. Avoid turning the steering wheel when the vehicle is stationary.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.