How to Handle 12 Points Deducted from a Motor Vehicle License?

Why is the newly replaced steering gear heavy?

There are several reasons why a newly replaced steering gear may feel heavy: 1. For electronic steering gears, it might be due to improper matching, while for hydraulic steering gears, it could be caused by air not being fully purged from the system; 2. The factory settings may not have been restored or reprogrammed; 3. The power assistance file might not have been written into the system using a computer, as different vehicles require different power assistance files; 4. Incorrect wheel alignment data. The steering gear, also known as the automobile steering mechanism, is a series of components designed to convert part of the mechanical energy output from the engine (or motor) into pressure energy. Under the driver's control, it applies hydraulic or pneumatic forces in different directions to the steering transmission or a specific transmission component in the steering gear, assisting the driver when their input force is insufficient.

3

0

Share

What items are tested in the motorcycle license exam?

Motorcycle license exams consist of three parts: Subject 1 (theoretical test), Subject 2 (operational test), and Subject 3 (road driving skills and safety & civilized driving knowledge test). Each subject offers two attempts. If both attempts are failed, the exam is terminated. During the validity period of the study permit, retake fees can be submitted for a retest after further study. The full name of the driver's license is the motor vehicle driver's license, which is a certification document issued by the government transportation department to individuals qualified to drive. It is usually a card. To obtain a driver's license, one must meet the age requirements and pass the driving test. The driver's license typically specifies the types of motor vehicles the holder is permitted to drive, such as motorcycles, passenger cars, trucks, and buses.

16

4

Share

How to use the ACC adaptive cruise control in the Tharu?

The steps to use the ACC adaptive cruise control in the Tharu are: 1. Press the ACC switch button to activate the adaptive cruise control system; 2. After ACC is activated, when the speed is between 30km/h and 150km/h, roll the adjustment button towards the SET direction; 3. The ACC activation indicator light on the instrument cluster will illuminate, and the instrument panel will display an ACC activation prompt. Taking the Tharu 2021 280TSI two-wheel-drive Fashion Edition as an example, the vehicle dimensions are 4453mm in length, 1841mm in width, and 1632mm in height, with a wheelbase of 2680mm. The drivetrain is front-wheel drive, the front suspension type is MacPherson independent suspension, the rear suspension type is multi-link independent suspension, and the power steering type is electric assist.

2

Share

What is the fuel tank capacity of the 2020 Buick GL8 in liters?

The 2020 Buick GL8 has a total of 13 models. Among them, the fuel tank capacity of the 653T series models is 70 liters, while the 652T series models have a fuel tank capacity of 66 liters. This data is officially released, and owners who have purchased the 2020 Buick GL8 can also check it on the vehicle's configuration sheet. The 2020 Buick GL8 requires 95-octane fuel. The 653T model has a fuel consumption of 7.9L per 100 kilometers, and a full tank can cover a distance of 886km. The 652T model has a fuel consumption of 7.8-7.9L per 100 kilometers, and a full tank can cover a distance of 835-846km. During daily driving, it is important to always monitor the remaining fuel level in the tank. This is usually done by observing the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe fill level, with additional space from the safe fill level to the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.

4

3

Share

What to Do When a Ford Car Shows High Engine Temperature?

Ford car shows high engine temperature solution is: 1. Stop and check whether the radiator coolant is normal, and whether there is any leakage in the radiator or hoses. If no abnormality is found through external inspection, you can replenish the coolant and continue driving; 2. If the coolant is found to be reduced after stopping and checking, it may be due to a perforation in the water jacket of the cylinder block causing coolant loss and resulting in excessive temperature. This fault requires repair. Taking the 2021 Focus 1.5L Manual Fengyue Sedan as an example, its body dimensions are 4647mm in length, 1810mm in width, and 1468mm in height, with a wheelbase of 2705mm. It is equipped with a 1.5L naturally aspirated engine, matched with a 6-speed manual transmission, and the body structure is a 4-door 5-seater sedan.

10

3

Share

How to reset the tire pressure on the new Mercedes-Benz E300L?

The tire pressure monitoring indicator is a yellow symbol, an irregular circle with no seal on top, four small spikes at the bottom, and an exclamation mark inside. The illumination of the tire pressure monitoring indicator indicates abnormal tire pressure. Abnormal tire pressure is generally caused by the following three reasons: Abnormal tire pressure: Typically, an alarm is triggered if the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the tire pressure monitoring indicator to illuminate. In this case, simply perform a tire pressure reset. Damaged tire pressure sensor: The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation valve. If the sensor is damaged due to impact while driving, it can also trigger the tire pressure warning light. For sensor damage, the only solution is to replace it with a new component.

12

4

Share

How to Handle 12 Points Deducted from a Motor Vehicle License?

Why is the newly replaced steering gear heavy?

What items are tested in the motorcycle license exam?

How to use the ACC adaptive cruise control in the Tharu?

What is the fuel tank capacity of the 2020 Buick GL8 in liters?

What to Do When a Ford Car Shows High Engine Temperature?

How to reset the tire pressure on the new Mercedes-Benz E300L?

Can Electric Vehicles Drive Through Water?

Where to Find the Engine Model of Roewe i5?

Does Installing Power-Closing Doors Affect the Original Vehicle?

Why do all the power windows of the Lavida fail?