···
Log in / Register

How to get the Car ending in Granny?

5Answers
BentleyDella
06/17/2026, 07:59:24 PM

To achieve the Car ending in Granny, you must repair the car in the garage and drive it through the front wooden barrier three times. The essential items are the Car Key, Spark Plug, Car Battery, Gasoline Can, Wrench, and Padlock Key. Successfully running over Granny with the car will knock her out for approximately 60 seconds, providing a crucial window to complete your escape.

The process is methodical and requires locating specific items. Market data from community guides and aggregated player reports indicate consistent item spawn points, though they can vary per playthrough. The Car Battery and Spark Plug are frequently found in the basement or on shelves in the garage itself. The Gasoline Can commonly spawns in the backyard shed or the car's trunk. The Padlock Key for the garage door is often located on the starting table or in kitchen drawers.

Here is a breakdown of the core steps and item functions:

StepAction RequiredKey Item UsedPrimary Function
1. Access GarageUnlock and lift the garage door.Padlock KeyGrants access to the vehicle.
2. Install ComponentsOpen the car hood and install parts.Car Battery, Spark PlugProvides power and ignition capability.
3. Secure EngineTighten the loose bolt under the hood.WrenchFinalizes mechanical repair.
4. Refuel VehicleOpen trunk, locate gas tank, and refuel.Car Key, Gasoline CanProvides fuel for the engine to run.
5. Execute EscapeStart car, drive forward, break wall.(All items completed)Completes the Car ending sequence.

Begin by using the Padlock Key on the garage door's padlock and then lift the door manually. Next, open the car's hood to install the Car Battery and Spark Plug into their designated slots. Use the Wrench on the visible bolt within the engine bay to secure everything. Afterwards, use the Car Key to open the vehicle's trunk, find the gasoline tank cap, and use the Gasoline Can on it.

Once the car is fully repaired and fueled, get inside and start the engine. Drive directly towards the large plywood wall blocking the exit. You must hit it three times to break through. A key tactical advantage is that you can deliberately hit Granny with the car. This impact stuns her for about a minute, which is a widely accepted figure based on gameplay testing, giving you ample time to finish repairs or line up your escape run if she is nearby.

Ensure the garage door is fully open before driving, or you will crash. If you're struggling to find an item, the car's own trunk and the basement are reliable locations to check first based on common spawn logic. This ending is one of the more reliable methods once you memorize the item locations and repair sequence.

Was this review help?
107
Share
JasmineRose
06/17/2026, 08:09:37 PM

I play Granny a lot, and the car escape is my go-to method. Here's my straightforward take: find the six key items—key, battery, plug, gas, wrench, padlock key. The garage door has to be up before you even think about driving. My personal trick? I always check the trunk and the basement shelves first for parts. Once the car is running, just floor it and smash through that wooden wall. It takes three solid hits. If Granny gets in your way, just run her over. She'll be down long enough for you to finish the job or get out.

Was this review help?
41
Share
Expand All
LeEmmanuel
06/17/2026, 08:15:25 PM

As someone who has helped many new players, I approach this ending as a clear, phased project. First, focus solely on item collection. Don't even open the garage until you have the Car Battery, Spark Plug, Gasoline Can, Wrench, and Padlock Key in your inventory. The Car Key is for the trunk, so you need that too. This prevents panic later.

Phase two is assembly. Unlock and open the garage. Install the battery and spark plug under the hood. Use the wrench on the bolt there. Then, open the trunk with the car key and pour in the gasoline.

The final phase is execution. Start the car. If Granny is close, use the vehicle to incapacitate her—it's a strategic move, not just an attack. Then, accelerate into the exit wall three consecutive times. The sequence is fail-proof if you manage your time and don't attempt repairs under pressure.

Was this review help?
12
Share
Expand All
CeciliaLee
06/17/2026, 08:26:32 PM

Think of it like a car repair puzzle inside a horror game. You need six pieces. The Padlock Key opens the garage. The Car Key opens the trunk. The Spark Plug and Car Battery go under the hood. The Wrench tightens a bolt there. The Gasoline Can goes into the tank in the trunk.

Put them all together, and the car starts. Then you drive. The wall at the front of the garage is fake wood. It breaks after you hit it three times. That's your exit. Big tip: The car is also your best weapon. Bumping into Granny stuns her for a full minute. So if she's bothering you while you're trying to work, use the car to buy yourself time. Just make sure the garage door is all the way up first!

Was this review help?
36
Share
Expand All
AryaAnn
06/17/2026, 08:31:49 PM

My strategy revolves around using the car as both a tool and a weapon. The primary goal is escape, but the vehicle's ability to neutralize Granny for 60 seconds is a game-changer. I first gather all portable items, prioritizing the Padlock Key to secure the garage as a safe workspace. Once inside, I repair the car step-by-step.

The moment the engine roars to life, the dynamic shifts. If Granny enters the garage, I don't flee immediately. I deliberately drive into her. This calculated hit knocks her out and provides a long, uninterrupted minute. I use that time to calmly position the car, align with the center of the plywood wall, and build up speed for the three necessary impacts.

This method turns a tense escape into a controlled procedure. It's not just about finding items; it's about leveraging the car's full functionality. The garage becomes your domain once the door is shut, and the car is your ultimate key to mastering the situation and securing the ending.

Was this review help?
13
Share
Expand All
More Q&A

How to Drive a Car with Manual and Automatic Transmission?

Car with manual and automatic transmission has M+ and M- buttons, which can be used to set the gear of the vehicle and switch between manual mode and automatic mode. Switch to manual mode in the following situations: 1. When accelerating to overtake. Manual mode accelerates faster and more powerfully than automatic mode, so it is better to switch to manual mode when you want to overtake. 2. When going downhill for a long distance. In this case, using manual mode to go downhill is more convenient and can reduce the number of times the car brakes, thereby reducing tire wear. 3. When encountering continuous undulating roads. At this time, using manual mode can not only improve driving stability and safety but also reduce the wear and tear on the vehicle caused by continuous braking. 4. When climbing a slope. Switching to manual mode at this time can give the vehicle more power, making it easier to climb the slope.
113
Share

What is the Three Guarantees Service for Automobiles?

Automobile Three Guarantees Service refers to the warranty repair, replacement, and refund services provided within the "Three Guarantees" period. Warranty Repair: During the "Three Guarantees" period, any malfunction caused by automobile product quality issues will be repaired free of charge after technical appraisal by the "Technical Service Center" or "Authorized Repair Station". Replacement: During the "Three Guarantees" period, if irreparable quality issues occur, qualified parts or assemblies can be replaced free of charge after appraisal by the "Center" or "Authorized Station". Refund: During the "Three Guarantees" period, if major quality issues occur and the product still fails to meet main technical performance indicators after the first two treatments, the user may submit a written refund request. After confirmation by the "Center", the dealer may process the vehicle return after collecting depreciation fees based on usage time and mileage.
111
Share

What does the 215/50r17 tire mean?

Automotive tire specification 215/50r17 refers to a tread width of 215mm; 50 is the aspect ratio (tire height ÷ tread width) indicating 50%; r denotes that the tire has a radial structure with steel belts; 17 indicates the rim diameter is 17 inches. When using tires, pay attention to the following points: 1. Develop the habit of regularly checking tire pressure: Pressure is key to extending tire lifespan—frequently exceeding normal pressure by 20% reduces tire life by 10%; if frequently below normal pressure by 30%, tire life decreases by 52%. 2. Maintain consistent tire pressure: Tire pressure is the lifeblood of tires. Low pressure increases tire body deformation, leading to sidewall cracks, excessive heat generation, rubber aging, ply fatigue, and cord breakage. 3. Regularly remove foreign objects from tires: While driving, small stones often get lodged in the tread grooves. If not promptly removed, these stones can puncture the tire over time, causing leaks or blowouts.
118
Share

Can I retake the Subject 1 exam immediately if I fail?

If you fail the Subject 1 exam for the first time, you cannot retake it immediately. You need to go to the registration area to swipe your ID card again, and then follow the computer prompts to proceed to the designated seat for the second attempt. If you fail the second time, you will need to leave the examination room and reschedule. Subject 1 exam content: Basic knowledge of motor vehicles; laws, regulations, and road traffic signals; fundamentals of safe and civilized driving; basic knowledge related to motor vehicle driving operations. Passing score for Subject 1: The total duration of the Subject 1 exam is 45 minutes. The exam consists of 100 questions, including true/false and multiple-choice questions, with a full score of 100 points and a passing score of 90. The exam papers are randomly selected and combined by the computer driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Regulations."
111
Share

What are the process requirements for beginners operating overhead cranes?

Requirements for beginners operating overhead cranes are as follows: 1. Wear protective equipment: Personal protective equipment must be worn before starting work. 2. Lifting equipment: Lifting equipment should be operated by designated personnel, and others should not operate it without authorization. The grounding wire should be completely intact and reliable. 3. Inspection: Before use, check whether the lifting buttons are in the correct position and whether all electrical and mechanical parts are in good condition. Before lifting workpieces, test the crane by running it empty to ensure normal operation. Do not exceed the rated lifting capacity specified on the nameplate during normal use. 4. Lifting workpieces: When lifting workpieces, ensure they are securely and stably fastened. Lift them slightly off the ground first and test the lift before proceeding. Do not exceed the specified load capacity. 5. No diagonal pulling: It is strictly prohibited to lift objects over people or machinery. The crane's own wire ropes should not be overlapped or twisted during use.
117
Share

What does the number after the subject two session mean?

The current session ranking, this ranking is arranged according to the passing time of the previous subject. Those who finish the test earlier will also come to make an appointment, and they will be pushed back. Sessions are generally arranged in the order of appointment, because some people will have priority appointments. Appointments are divided into ordinary appointments and priority appointments (there are still six months until the exam deadline). Suppose the first person to register is an ordinary appointment, but there are 30 people behind who have priority appointments, then they will be pushed back to the 31st position. Assuming that each session tests 20 people, it will change from the first session to the second session. Exam appointment rules: 1. First appointment: For the first appointment for subject one exam, the sorting time is based on the initial application for a driver's license or the application for an additional driving business; 2. Non-first appointment: For non-first appointments for subject one exam, the sorting time is based on the last exam time; 3. Cancellation of appointment time: For users who successfully make an exam appointment but cancel it due to their own reasons, the sorting time is based on the cancellation time. If the exam cannot be taken for non-personal reasons, the sorting time remains unchanged.
112
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.