···
Log in / Register

How to Fold the Rearview Mirror?

1Answers
LaKhloe
07/24/2025, 05:10:47 PM

If it is an electric rearview mirror, generally pressing the automatic folding button will simultaneously fold and retract the rearview mirrors on both sides of the car; if it is a manual rearview mirror, it can only be folded manually. Here is some relevant information about rearview mirrors: 1. The car's rearview mirrors are located on the left and right sides of the car's front. They reflect the situation behind, beside, and below the car, allowing the driver to indirectly see these areas clearly, thereby expanding the driver's field of vision. 2. Rearview mirrors are categorized by installation position into exterior rearview mirrors, lower rearview mirrors, and interior rearview mirrors. By purpose, exterior rearview mirrors reflect the rear side of the car, lower rearview mirrors reflect the front lower part of the car, and interior rearview mirrors reflect the rear of the car and the interior situation.

Was this review help?
113
Share
More Q&A

What engine does the Arrizo GX use?

The Arrizo GX is equipped with the SQRE4G15C engine, which delivers a maximum horsepower of 116 HP, a maximum power output of 85 KW at 6150 rpm, and a peak torque of 143 N.m. The vehicle's power performance is smooth, and it is well-known for its low fuel consumption and maintenance costs. The engine of the Arrizo GX is independently designed and developed by Chery, making it a domestically produced engine. For daily maintenance of the Arrizo GX's engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional equipment of the intake and exhaust systems and usage conditions. For diesel engines, CB--CD grade diesel engine oil should be chosen according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will deteriorate during use. After a certain mileage, performance degradation can cause various engine problems. To avoid malfunctions, change the oil regularly according to usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through, the filter may burst or the safety valve may open, allowing oil to bypass the filter and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls. These mix with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts can precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
119
Share

What is the normal tire pressure for a Malibu car?

The normal tire pressure range for a Malibu is 2.4-2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and decreased by 0.1bar in summer. This data is based on the international GBT2978-2008 standard. The Malibu does not come with a tire pressure monitoring system from the factory. It is recommended to purchase a tire pressure gauge, locate the position of the original tire pressure label, press the gauge onto the tire valve to measure and read the pressure, and remember to replace the valve cap after measurement. Additionally, a tire pressure monitoring system can be installed. Generally, a tire pressure above 2.8bar is considered too high, and a tire pressure below 2.0bar is considered too low. Hazards of overinflated tires: Reduced friction and adhesion of the tires, affecting braking performance; causing steering wheel vibration and deviation, reducing driving comfort; accelerating wear on the central tread of the tire, shortening tire lifespan; increased body vibration, indirectly affecting the lifespan of other components; excessive stretching of tire cords, reducing tire elasticity, and increasing the load on the car during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; causing heavy steering and deviation, which are unfavorable for driving safety; increased movement of various parts of the tire, leading to abnormal heat generation due to excessive rolling; reduced functionality of cords and rubber, causing delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplied friction between the tire and the ground, sharply increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure. Usually, an alarm is triggered when the pressure is below 1.8bar or above 3.0bar. In this case, tire inspection and pressure adjustment are needed. Tire pressure monitoring not reset. After inflating the tires, the tire pressure was not reset in time, causing the tire pressure monitoring system to still record the previous data, and the tire pressure monitoring indicator light will remain on. In this case, simply reset the tire pressure. Damaged tire pressure sensor. The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation valve. If the sensor is damaged while driving, the tire pressure warning light will also come on. For sensor damage issues, only a new replacement part can be used.
113
Share

Why Replace the Original Engine Number?

Changing the original engine number means replacing the engine. When the engine noise is very loud, it is necessary to replace the engine: After replacing the engine, there is no need to change any procedures because the engine number remains the same. For future vehicle inspections or transfers, only the chassis number is checked, not the engine number. Precautions for engine replacement: After replacement, the engine number must be reported to the vehicle management office to update the vehicle information for future annual inspections. Another method is to replicate the original engine number from the replaced engine onto the new engine. This way, the vehicle management office's records do not need to be updated.
119
Share

Is the first traffic violation for a new car exempt from penalties?

New cars are not exempt from penalties for their first traffic violation. Notification time limit: After a traffic violation, you will generally receive a violation notification via text message within 3-7 days. According to traffic laws, violations are usually recorded online or via SMS notification within 3 to 7 days, with a maximum delay of no more than 13 working days. On-the-spot penalties: If you are stopped by traffic police on-site and sign the violation confirmation, you must report to the local traffic police department within 15 days of the violation. Failure to do so within this period will result in a daily late fee of 3%, although the total late fee will not exceed double the original fine amount.
101
Share

What Causes Idle Vibration in the Edge?

The reasons for idle vibration in the Edge are as follows: 1. Engine intake pipe leakage: The intake system contains numerous intake manifolds or various valves. Leakage in these components can allow unintended gases to enter, leading to excessively high or low concentrations of the air-fuel mixture in the intake manifold, ultimately causing intermittent engine vibration or weak idle performance. 2. Fuel system blockage or malfunction: Blockages in the fuel tank vent, fuel tank switch, fuel filter, or the fuel line between the fuel tank and carburetor can prevent the engine from receiving the required amount of fuel during idle, resulting in a lean air-fuel mixture, weakened engine power output, and idle vibration.
104
Share

What does the ACCRES button on the steering wheel mean?

The CANCEL button on the steering wheel means cancel. Function of the CANCEL button: Its function is that when this button is pressed, it exits the cruise control system, but the system retains the current cruising speed for next use. Other methods to exit cruise control: In addition to pressing the CANCEL button, during cruise control, generally stepping on the brake pedal, accelerator pedal, or clutch pedal, manually changing the transmission gear, or when the actual speed is about 15 km/h higher or 40 km/h lower than the cruising speed, the cruise system will also temporarily deactivate or exit.
105
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.