How to Fold the Rearview Mirror of the Tiguan?

3 Answers
QuinnMarie
07/30/25 1:05am
Tiguan has a rearview mirror knob on the left side of the driver's door. Rotating the knob can automatically fold the mirrors. There are two main benefits of foldable rearview mirrors: 1. During driving, rearview mirrors are the widest components installed on the vehicle and are most susceptible to impact in case of side collisions. Having foldable mirrors improves the vehicle's passability and minimizes the risk of scratches. 2. After parking and turning off the engine, folding the mirrors not only protects the mirror surface but also reduces the parking space required, effectively preventing scrapes.
Was this review help?
12
0
Share
DaisyMarie
08/15/25 6:35am
To fold the mirrors on the Tiguan, I do this often because parking spaces in the city are narrow, and not folding them can lead to scratches. For manual models, like some basic versions, you can gently push the mirror body from the outside, feel for a pivot point, and push it backward into place—don’t use too much force, or it might get stuck. For automatic models, it’s simpler: sit in the driver’s seat, locate the small button on the door armrest with the mirror folding icon, press it once to fold, and press again to unfold. New drivers should remember to do this before turning off the engine, as the system might respond slowly otherwise. After folding, ensure the mirror edges avoid obstacles, and regularly check the mirror base pivot for stiffness—adding lubricant can extend its lifespan and prevent rust damage.
Was this review help?
5
4
Share
Expand All
SanKate
10/20/25 5:01am
As a frequent driver, I consider folding side mirrors a basic safety operation, especially for SUVs like the Tiguan. For manual folding, stand beside the car, grip the edge of the mirror, and gently push it backward from the side to slide it in smoothly. For automatic ones, locate the folding button in the car's control panel. Folding reduces the risk of scratches, prolongs mirror life, and enhances maneuverability in narrow streets during reversing. Always avoid forcing the mirrors to fold in strong winds or icy conditions to prevent mechanical deformation. I also recommend regularly cleaning the mirror surface and pivot points, as accumulated dirt can hinder movement. If folding becomes difficult, check for insufficient lubrication or debris in the hinges and address it promptly to prevent minor issues from escalating.
Was this review help?
16
1
Share
Expand All
More Forum Discussions

How often should the coolant be replaced for a Haval H2?

Haval H2 engine coolant should be checked every 6 months and replaced every 24 months. Here are more details about the coolant: 1. Most family cars require coolant replacement every two years or 40,000 kilometers, but the specific replacement interval depends on the vehicle's usage and whether the coolant level is below the minimum mark (the normal coolant level should be between MIN and MAX; if it's too low, it should be topped up promptly to avoid affecting the engine's cooling efficiency). 2. Long-term failure to replace the coolant can lead to deterioration in its quality, reducing its anti-corrosion properties. This can damage components like the radiator and pipes and affect the boiling and freezing points, compromising the coolant's effectiveness. Do not wait until the coolant turns black before replacing it—blackened coolant indicates severe deterioration and significant scale buildup, which may have already damaged the pipes. During each maintenance check, use a freezing-point tester to measure the coolant's freezing point. If the freezing point is too high, it means the coolant has deteriorated and needs replacement. 3. Generally, coolant should be replaced every two years or around 60,000 kilometers. Coolant prevents freezing when the vehicle is not running, as it resides in the engine block. If the liquid turns into a solid, it expands, which can crack the engine block. Additionally, after the vehicle starts, the coolant helps cool the engine to prevent overheating and potential damage. It also plays a role in preventing rust and excessive scale buildup, which can clog the pipes.
10
2
Share

Where is the OBD interface located in the Touran?

The OBD interface of the Volkswagen Touran is located behind the plastic cover under the steering wheel. OBD is the abbreviation for On-Board Diagnostics, which means the vehicle's automatic diagnostic system in Chinese. Information about the vehicle's automatic diagnostic system is as follows: 1. The vehicle's automatic diagnostic system can monitor important parts of the car in real-time and will issue an alarm promptly when a fault occurs. 2. The parts monitored by OBD include the oxygen sensor, fuel system, engine, emission control system, catalytic converter, EGR, particulate filter, etc.
10
4
Share

What documents should I bring for the first car maintenance?

Items required for the first maintenance include: driver's license; vehicle registration certificate; maintenance manual; warranty manual; owner's ID card; vehicle's driving license; vehicle purchase invoice, to be taken to the designated first maintenance facility for the service. Important note: make an appointment with the 4S shop in advance. The first maintenance refers to the initial service after a new car has been driven, with the specific time varying by vehicle, usually after driving 1,000 to 3,000 kilometers. It is essential to attend the first maintenance on time, neither in advance nor delayed. The completion of the first maintenance marks the end of the car's break-in period, allowing it to be driven under standard loads and normal speeds as required by the vehicle. The timing of the first maintenance is calculated from the date of vehicle pickup. There are two indicator values for the first maintenance: mileage and time. Whichever comes first serves as the standard. The first maintenance items include: oil change, oil filter replacement, air filter cleaning, checking various fluid levels for normalcy, inspecting the generator belt and wiper blades for damage, checking tire pressure for normalcy, and inspecting tires for damage or bulges. Estimated time required: approximately 2 hours to complete all tasks. The most crucial aspect of the first maintenance for a new car is the replacement of engine oil and the oil filter. When changing the oil, the oil filter must also be replaced. The selection of oil must refer to the "Vehicle Usage and Maintenance Manual," as different vehicle models specify different oil grades. Maintenance precautions: Do not wash the interior of the car body with water: Many people clean their cars during holidays, washing the body with water and wiping it with a cloth. It is important to note that the interior of the car body should not be directly washed with water. If the floor mats are dirty, use a vacuum cleaner or take them out to brush and clean with detergent, dry them, and then put them back. There are many vent holes under the rubber mats on the floor of the driver's compartment. Water entering these areas will not dry naturally but will flow through the holes to parts like the gearbox, causing erosion and corrosion. The best practice is to clean with a vacuum cleaner and then wipe with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: When the antifreeze in the car is low, it is recommended to drain the existing antifreeze and add the same brand from the beginning. Different brands of antifreeze have significantly different chemical properties. Various functional additives may corrode others. Different brands of antifreeze use different additives, so they should not be mixed to avoid unnecessary issues. Do not lubricate tire bolts and nuts: When bolts on a moving car rust, they are often oiled to function properly again. Some people apply lubricant to bolts and nuts to prevent rust, but this poses a risk to safe driving. At high speeds, bolts and nuts can easily loosen or even fall off, leading to driving failures. Do not press the accelerator when starting an EFI (Electronic Fuel Injection) car: The starter of an EFI car differs from that of a conventional car. Its fuel injection control device can automatically adjust the fuel supply based on the starter's temperature and operating conditions, ensuring a smooth start.
6
4
Share

What material are car bumpers made of?

Car bumpers are typically made of plastic, although some older or special-purpose vehicles may have metal bumpers. The material used for bumpers varies depending on the vehicle's function and driving environment. Car bumpers not only enhance the vehicle's appearance but also provide a safer driving environment for the driver. Reasons for using plastic bumpers in cars: 1. Weight reduction - Plastic bumpers are lighter than metal ones, helping achieve vehicle weight reduction goals, which in turn helps drivers save fuel and reduce emissions. 2. Pedestrian safety - In the event of a traffic accident, plastic bumpers offer better protection for pedestrians due to their excellent impact resistance, reducing potential injuries caused by the bumper.
9
0
Share

Is the Buick Excelle a Joint Venture or Domestic Vehicle?

The Buick Excelle is a joint venture vehicle, a compact sedan under the Buick brand. Below are the relevant details: 1. The vehicle's length, width, and height are 4609 mm, 1798 mm, and 1464 mm respectively, with a wheelbase of 2640 mm. 2. The Buick Excelle is equipped with two types of engines: a 1.3-liter turbocharged engine and a 1.5-liter naturally aspirated engine. 3. The 1.5-liter naturally aspirated engine delivers a maximum horsepower of 113 hp and a maximum torque of 141 Nm, featuring DVVT technology and multi-point fuel injection, with an aluminum cylinder head and cast iron cylinder block. The 1.3-liter turbocharged engine produces a maximum horsepower of 163 hp and a maximum torque of 230 Nm, equipped with a 48V mild hybrid system and multi-point fuel injection, utilizing an aluminum cylinder head and block.
2
2
Share

Should the Prado use 5w40 or 5w30?

The Prado uses 5w30 engine oil. Here is some information about the Prado: 1. The new domestic Prado is equipped with a 3.5-liter naturally aspirated V6 engine, codenamed 7GR-FKS. This engine has a maximum power of 206 kW, a maximum torque of 365 Nm, a maximum power speed of 6000 rpm, and a maximum torque speed of 4500 rpm. 2. The 3.5-liter naturally aspirated V6 engine features VVT-i technology and hybrid injection technology, and uses an aluminum alloy cylinder head and block. This engine is paired with a 6-speed automatic transmission. 3. The Prado's front suspension uses a double-wishbone independent suspension, while the rear suspension uses a four-link non-independent suspension. 4. This vehicle is equipped with part-time four-wheel drive technology. Part-time four-wheel drive allows mode switching; generally, vehicles with part-time four-wheel drive have high-speed four-wheel drive mode, low-speed four-wheel drive mode, and high-speed two-wheel drive mode. Vehicles with part-time four-wheel drive systems come with a transfer case, which can be considered as a secondary gearbox. Switching to low-speed four-wheel drive mode amplifies wheel torque, enhancing the vehicle's off-road capability. 5. The Middle East version of the imported Prado is equipped with a 4.0-liter naturally aspirated engine, and many enthusiasts opt for this version due to its more powerful performance. The Prado enjoys strong sales and a good reputation in China, and it also maintains high resale value in the used car market.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.