How to Fold Down the Rear Seats of the Tiguan?

What materials are used to make car fuel tanks?

Car fuel tanks can be divided into two main categories based on their materials. One is metal tanks, and the other is plastic tanks. Here is relevant information about car fuel tanks: 1. Metal car fuel tanks: With the development and application of various new materials, the rust prevention issue of iron fuel tanks has become the most significant problem affecting tank quality. This is especially true in today's environmentally conscious era. In the heavy-duty truck sector: during the promotion of National IV and V vehicles, fuel quality emerged as a key factor affecting the rollout of new models, with the quality of fuel tanks—the containers for fuel—becoming a focal point. Aluminum alloy tanks not only meet strength requirements but also offer significant advantages in corrosion resistance compared to iron and other new materials. They have thus become the preferred choice for large buses and heavy-duty trucks, which have high fuel consumption and stringent fuel quality requirements. 2. Polymer plastic fuel tanks: With advancements in polymer material technology, an increasing number of vehicle models now use polymer plastic fuel tanks. Today's plastic tanks not only match the stiffness and strength of metal tanks but also offer many advantages that metal tanks lack. For example, plastic tanks do not catch fire upon contact with other objects during collisions; they do not generate static electricity; and they can withstand intense fire for up to 30 minutes. As a result, the vast majority of private cars now use plastic fuel tanks.

102

Share

Where is the crankshaft position sensor located on an Audi Q5?

The crankshaft position sensor on an Audi Q5 is typically installed inside the distributor. Function of the crankshaft position sensor: It detects the engine speed, hence also known as the speed sensor, and identifies the top dead center position of the pistons, thus referred to as the top dead center sensor. It includes detecting signals for controlling ignition timing for each cylinder's top dead center and the first cylinder's top dead center signal for sequential fuel injection control. Through the crankshaft position sensor, it can determine which cylinder's piston is at top dead center, while the camshaft position sensor identifies which cylinder's piston is in the compression stroke. Symptoms of a faulty crankshaft position sensor: During engine operation, if the crankshaft position sensor fails, it can lead to signal interruption, causing the engine to fail to start or immediately stall during operation. In such cases, the ECU can diagnose the fault and store the corresponding trouble code.

114

Share

Is the Audi Q5 equipped with a transversely or longitudinally mounted engine?

The Audi Q5 features a longitudinally mounted engine. Rear-wheel-drive vehicles generally adopt this configuration because the power needs to be transmitted to the rear axle. When the transmission distance cannot be shortened, minimizing directional changes in power transfer becomes crucial. Longitudinally mounted engine overview: A longitudinally mounted engine refers to an engine positioned perpendicular to the vehicle's front axle. Simply put, when standing in front of the car facing the engine, if the engine appears vertically aligned in your view, it's a longitudinally mounted configuration. Transversely mounted engine overview: A transversely mounted engine aligns parallel with the vehicle's front axle. In practical terms, when standing before the car facing the engine, if the unit appears horizontally positioned in your line of sight, it's a transversely mounted design.

109

Share

Why does the Audi A6 air conditioner blow hot air instead of cooling?

Audi A6 air conditioner blows hot air instead of cooling for the following reasons: 1. First, check if the air conditioner is in cooling mode: if yes, proceed to the next steps. 2. Confirm whether the air conditioner is a heat/cool unit: if it is, check if the four-way valve is malfunctioning by engaging during cooling. 3. The air conditioner is a cooling-only unit: if the air conditioner is cooling-only, it cannot blow hot air; at worst, it will blow room-temperature air. 4. Heating tube malfunction: another more dangerous situation is that the heating tube in a heat/cool unit is operating during cooling. If this occurs, it must be addressed immediately as it poses a significant risk.

101

Share

What to Do If the Chassis is Scraped?

If the car's chassis is scraped, it should be inspected. Here is some information about the car chassis: 1. Prevention: When designing a car, the chassis is built to withstand certain impacts. The most vulnerable parts of the car's chassis are various pipelines, such as brake hydraulic pipes and fuel pipes. However, these pipelines are hidden and protected in the grooves of the chassis steel plate and are not higher than the chassis's horizontal plane. 2. Impact with the ground: If the chassis hits protruding rocks on the ground, the impact will be point-like, and the protruding rocks may damage the pipelines in the grooves, leading to oil or fluid leakage, which can be hazardous. You can drive the car to a repair shop and have it lifted for a thorough inspection of the chassis.

110

Share

How to Turn Off a Car with Keyless Ignition?

Steps to turn off a keyless ignition car: 1. Press the brake pedal and bring the vehicle to a complete stop. 2. Shift the gear from D (Drive) to N (Neutral). 3. Engage the handbrake (for electronic handbrakes, simply pull it upward). 4. Release the foot brake but do not turn off the power (this ensures the car is fully stabilized by the handbrake, preventing P-gear lock-up). 5. Continue pressing the foot brake and shift the gear from N to P (Park). 6. Release the foot brake, press the start/stop button to turn off the power, completing the parking process. Precautions for keyless ignition system cars: 1. Avoid placing the smart key near electronic devices. Since smart keys use low-intensity radio waves, they may malfunction under magnetic interference. Keeping the smart key close to a phone can cause interference from the phone's frequency, leading to failure. Exposure to high-intensity radio waves may also drain the battery excessively. Therefore, avoid placing the smart key near TVs, computers, etc. 2. Avoid rough handling. Smart keys are highly sensitive to drops from heights, as their internal circuits have weak impact resistance and can be easily damaged by severe collisions. 3. If the smart key gets wet, the internal circuits may short-circuit and malfunction. In case of water exposure, open the casing, lay it flat, and dry it with a hairdryer before taking it to a repair shop for inspection. Do not shake the key vigorously, as this may spread water to other critical circuits. Also, avoid using the remote immediately, as it could burn out the circuit board. 4. Do not expose the smart key to direct high-temperature environments, such as on the dashboard or engine hood.

106

Share