How to Fix Water in Headlights by Yourself?

What does it mean when there is no production date on a tire?

If there is no production date on a tire, it might be installed backward, or the production date has been worn off. Here are some relevant precautions: During installation: When mounting the tire on the rim, the outside should face outward. The outer side of the tire usually has "outside" marked on it. When installing the tire, ensure the side marked "outside" faces outward. If you are purchasing a new tire and it doesn’t have a production date, do not buy such a tire. Most of these tires have had their production dates intentionally ground off by sellers to conceal the tire's age. Daily maintenance: Generally, tires should be replaced every four years. Since tires are made of rubber, they will age even if not used. When driving, avoid driving over curbs, and slow down when passing over bumpy roads or speed bumps. Regularly clean out small stones stuck in the tire treads.

16

4

Share

Is the 2020 domestically produced Mercedes-Benz C-Class a three-cylinder model?

2020 domestically produced Mercedes-Benz C-Class is not a three-cylinder model; all engines used are four-cylinder. The Mercedes-Benz C is a mid-sized car under the Mercedes-Benz brand. The domestically produced version of the Mercedes-Benz C is equipped with a low-power version of the 1.5-liter turbocharged engine, a high-power version of the 1.5-liter turbocharged engine, and a 2.0-liter turbocharged engine. The low-power version of the 1.5-liter turbocharged engine in the Mercedes-Benz C has 156 horsepower and a maximum torque of 250 Nm, with the maximum torque available between 1,500 to 4,000 rpm and the maximum power at 5,700 rpm. It is paired with Mercedes-Benz's 9AT transmission. In terms of body dimensions, the car measures 4,784 mm in length, 1,810 mm in width, 1,457 mm in height, and has a wheelbase of 2,920 mm.

7

3

Share

Can You Answer the Questions You Know First in the Subject One Test?

You can answer the questions you know first in the Subject One test. Here are the relevant details: Skipping Questions: If you encounter a question you don't know during the Subject One test, you can skip it. Do not select any options; simply click on the next question and proceed to answer the ones you are confident about. At the end, the computer's top-right corner will display the status of all 100 questions. Carefully review the unanswered questions and then make your selections. Important Notes: Currently, the Subject One test is mostly not conducted in written form but as a paperless, screen-based simulation exam. All questions are answered using a computer, with question types divided into multiple-choice and true/false. There are a total of 100 questions, each worth 1 point, and a score of at least 90 is required to pass. The test duration is 45 minutes. If you fail, you must apply for a retake.

16

1

Share

What are the starting steps for the Subject 2 vehicle?

Before starting the car, first turn the key clockwise to the START position. Apply slight force to rotate it forward, and release immediately once the engine starts (the tachometer needle rises, and the warning indicators on the dashboard turn off). At this point, the ignition switch will automatically return from the start position to the normal ignition position. After the engine starts, observe the readings on each instrument panel and check for any abnormal conditions in the engine, such as unusual noises, water leakage, or oil leakage. Before starting the engine, always ensure that the parking brake lever is pulled tight and confirm that the gear shift lever is in the neutral or P position. The starter should not be engaged for more than 5 seconds at a time, with intervals of at least 15 seconds between attempts, and no more than 3 consecutive attempts. If the engine fails to start after 3 attempts, identify the cause and resolve the issue before attempting to start again.

18

1

Share

What are the basic knowledge for beginners in Subject 2?

Subject 2 basic knowledge for beginners includes steering wheel operation, familiarizing with lights, adjusting rearview mirrors, adjusting seats, gear shifting functions, gear shifting operations, and familiarizing with the handbrake. Here are some expanded details: Steering wheel operation: The steering wheel is the device used to control the vehicle's direction, located in front of the driver's seat. Turning the steering wheel controls the vehicle's movement in different directions. Turning the steering wheel to the left makes the front of the car move left, and turning it to the right makes the front move right. The same principle applies when reversing. Familiarizing with lights: In the off state, turning the knob to the right once turns on the parking lights, and turning it twice turns on the low beams. When the parking lights or low beams are on, pulling up the knob turns on the fog lights.

1

3

Share

How Many Turns to Lock the Steering Wheel on a Pickup Truck?

Locking the steering wheel on a pickup truck requires one and a half turns. Below are specific details about the steering wheel operation in pickup trucks: Steering wheel lock state: When the steering wheel is in the straight position, turning it fully to the left or right requires one and a half turns. When making a turn, if the steering wheel is locked, the pressure on the power steering pump can increase several times or even more. Continuously locking the steering wheel can shorten the lifespan of the power steering pump, so it's important to avoid keeping the steering wheel locked for extended periods. Steering wheel lock angle: It's best to complete the required steering input in one motion. For example, if a 100-degree steering angle is needed, try to achieve it in a single motion rather than dividing it into two or three separate actions. Technique for locking the steering wheel: The specific method depends on personal preference, but it's crucial to avoid turning the wheel with palms facing upwards.

6

5

Share

How to Fix Water in Headlights by Yourself?

What does it mean when there is no production date on a tire?

Is the 2020 domestically produced Mercedes-Benz C-Class a three-cylinder model?

Can You Answer the Questions You Know First in the Subject One Test?

What are the starting steps for the Subject 2 vehicle?

What are the basic knowledge for beginners in Subject 2?

How Many Turns to Lock the Steering Wheel on a Pickup Truck?

Why does the car still move forward after braking?

Is There a Problem If a Piece Is Missing from the Side of the Tire?

Can a battery be used after being drained three times?

What is the difference between Audi A4L 35 and 40?