How to Drive a Nissan Sylphy with Automatic Transmission?

[DeAdeline]

To drive a Nissan Sylphy with automatic transmission, follow these steps: depress the brake to start the engine, shift to D gear to move forward, use R gear for reversing, and shift to P gear when parking. The Nissan Sylphy has the following dimensions: length 4631mm, width 1760mm, height 1503mm, wheelbase 2700mm, minimum ground clearance 166mm, fuel tank capacity 50L, and trunk capacity 510L. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum power of 90kW and a maximum torque of 155Nm, paired with a 5-speed manual transmission. The front suspension is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension.

[HectorMarie]

When I first drove the Nissan Sylphy with automatic transmission, I found it super easy and perfect for commuters like me. Step one, after getting in the car, adjust the seat and fasten the seatbelt for safety; then, firmly press the brake pedal to start the engine. After ignition, don’t release your foot—immediately shift the gear lever from P to D—this is when the car starts preparing to move. Gently release the brake, and the car will automatically glide forward slightly, then gently press the accelerator for a smooth start. For daily driving, just keep it in D gear; when reversing, come to a complete stop first, shift to R gear, and then proceed. The key to parking is to press the brake, shift to P gear, engage the handbrake, and then turn off the engine. The Sylphy’s automatic transmission is responsive, making city driving effortless, and the gearbox is smooth, ensuring no jerking even after long-term use. With good habits, it’s both safe and fuel-efficient.

[DeKarter]

Don't be afraid of driving a Nissan Sylphy automatic as a beginner. I was nervous at first too, but step by step, you'll get the hang of it. First, get in the car and keep your foot on the brake to prevent the car from moving; start the engine and wait for the dashboard lights to come on. While keeping your foot on the brake, shift the gear lever from P to D, and the car is ready to move. Slowly release the brake, and the car will start to glide forward; gently press the accelerator to speed up. If you're reversing, make sure to stop completely first, then press the brake and shift to R gear. When parking, remember the sequence: press the brake to stop → shift to P gear → pull the handbrake → turn off the engine. At the beginning, it's recommended to practice switching between R and D gears in an open area until you feel comfortable. The Sylphy's design makes the operation intuitive and simple, so beginners can quickly gain confidence in driving.

[SanJack]

The core of driving a Sylphy automatic transmission lies in the gear shifting operation, which I prioritize for simplicity and efficiency. Before starting, firmly press the brake pedal and ignite the engine; then, with the brake pedal depressed, shift the gear lever from P to D—this engages the driving mode. While driving, maintain D mode without intervention, as acceleration and deceleration are handled automatically; R mode is for reversing and must only be engaged after coming to a complete stop. When parking, slow down to a stop, press the brake, and return to P mode to prevent rolling. Throughout the process, ensure the brake pedal is pressed during gear shifts to avoid mechanical damage. The entire procedure is smooth and natural.

[McChase]

Safety first when driving the automatic Nissan Sylphy, I emphasize the potential risk points. Always press the brake when shifting gears, starting before the engine is turned on, otherwise the car may roll away and cause injury or property damage. Ensure the foot brake is firmly engaged before shifting from P to D or R, and do not switch to P while driving, as it may lead to loss of control. Follow strict parking procedures: after coming to a complete stop, shift to P and engage the handbrake, then turn off the engine. Developing this habit protects yourself and keeps the vehicle in good condition while reducing maintenance needs. Apply smooth acceleration during operation to avoid jerks.