How to do karaoke in the car?

Where is the production location of the NIO ES6?

The NIO ES6 is produced in Hefei. Taking the 2020 NIO ES6 as an example, it is a mid-size SUV with the following dimensions: length 4850mm, width 1965mm, height 1758mm, wheelbase 2900mm, front track 1668mm, rear track 1672mm, curb weight 2200kg, and luggage compartment volume ranging from 584L to 1433L. The 2020 NIO ES6 features a front suspension with double-wishbone independent suspension, rear suspension with multi-link independent suspension, dual-motor all-wheel drive system, and a single-speed transmission for electric vehicles.

14

0

Share

How to turn off the auto start-stop function in XTS?

The method to turn off the auto start-stop function in XTS is to press the auto start-stop button. Taking the 2018 XTS as an example, it is a mid-to-large-sized car with body dimensions of: length 5103mm, width 1852mm, height 1502mm, wheelbase of 2837mm, minimum ground clearance of 127mm, and a body weight of 1840kg. The 2018 XTS features a front McPherson independent suspension and a rear multi-link independent suspension, equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 269PS, maximum torque of 353Nm, and maximum power of 198kW.

5

2

Share

How often should the Dongfeng Fengguang 580 be serviced?

The Dongfeng Fengguang 580 should be serviced every 7,000 kilometers or 6 months. The service includes: 1. Changing the engine oil, oil filter, cleaning the air filter, and checking the generator belt and wiper blades for damage; 2. Checking the levels of various fluids; 3. Ensuring all switches and lights in the vehicle are functioning properly; 4. Checking tire pressure and inspecting tires for uneven wear, bulges, or damage; 5. Inspecting the vehicle's chassis, including brake pads, brake discs, connecting rods, ball joints, and CV joints for any damage. Taking the 2021 Dongfeng Fengguang 580 as an example, it is a mid-size SUV with dimensions of 4700mm in length, 1845mm in width, 1715mm in height, a wheelbase of 2780mm, a fuel tank capacity of 58 liters, and a curb weight of 1490kg.

5

0

Share

How to Solve Engine Piston Slap?

Engine piston slap can be resolved by the following methods: 1. If knocking sounds occur in low-temperature environments after starting the car and disappear as the temperature rises, this type of piston slap can be temporarily ignored, and driving can continue; 2. If the knocking sounds persist or become more pronounced after the engine reaches normal operating temperature, the driver should avoid high-speed driving, stop to inspect promptly, and prevent potential traffic accidents; 3. If severe cylinder ovality, scoring, or excessive clearance between the piston and cylinder is found after removing the cylinder head and extracting the piston, replacement is necessary—replace the cylinder liner, piston, and piston rings; 4. If connecting rod deformation is detected, replacement is strongly recommended.

14

2

Share

What is the appropriate mileage for a car's first maintenance?

The first maintenance for a car is appropriate at 5,000 kilometers. The first maintenance includes: 1. Changing the engine oil, oil filter, and cleaning the air filter, checking whether the generator belt and wiper blades are damaged; 2. Checking whether the levels of various fluids are normal; 3. Checking whether the tire pressure is normal and whether there is uneven wear, bulging, or damage on the tires; 4. Inspecting the car chassis, including brake pads, brake discs, connecting rods, ball joints, and CV joints for any scratches; 5. Verifying whether all switches and lights in the car are working properly. Precautions for the first maintenance are: 1. Make an appointment in advance; 2. Record any faults or questions encountered while driving and inform the staff during the maintenance registration.

4

2

Share

What Causes the Clicking Sound When Shifting Gears in an Automatic Transmission?

The reasons for the clicking sound when shifting gears in an automatic transmission are: 1. Issues with the generator gear; 2. Large valve clearance and poor lubrication when the engine is cold; 3. Transmission failure; 4. The car was not completely stopped when shifting gears. Precautions for shifting gears in an automatic transmission car: 1. Do not press the accelerator pedal when shifting gears; 2. Do not press the accelerator pedal hard after engaging a gear; 3. The vehicle can only be started in P or N gear; 4. The brake must be pressed to remove the gear lever from P gear; 5. Do not shift into N gear while driving to coast; 6. Do not push into P gear while the car is moving; 7. When changing the direction of travel, switching between D and R gears must be done after the vehicle has come to a complete stop; 8. Placing the gear in N while driving prevents the oil pump from supplying oil normally for lubrication, which can cause the temperature of internal transmission components to rise and lead to damage.

18

2

Share

How to do karaoke in the car?

Where is the production location of the NIO ES6?

How to turn off the auto start-stop function in XTS?

How often should the Dongfeng Fengguang 580 be serviced?

How to Solve Engine Piston Slap?

What is the appropriate mileage for a car's first maintenance?

What Causes the Clicking Sound When Shifting Gears in an Automatic Transmission?

What are the differences between Mitsubishi's Super Select 4WD and full-time 4WD systems?

Does the BYD Tang Belong to New Energy Vehicles?

Does the 2018 Edge meet China 6 emission standards?

What is the tire brand of Toyota Corolla?