How to Display Tire Pressure on the Tiguan L?
3 Answers
Tiguan L method to display tire pressure: Before resetting, the tire pressure should be restored to normal levels; Turn on the vehicle ignition; Press and hold the SET button on the center console until the tire pressure data refreshes. What to do if the tire pressure is insufficient: If no visible damage is found on the car's tires, simply inflate them to the normal pressure and reset the tire pressure system. If inspection reveals that the tire has been punctured, drive to a car repair shop promptly for a tire patch, then reinflate. If the tire pressure warning appears again some time after inflation without any punctures, it may be due to air leakage caused by a deformed wheel rim. It is recommended to check the rim and replace it if necessary. The working principle of tire pressure monitoring is: Using pressure sensors installed inside the tires to measure air pressure, the system transmits pressure information wirelessly from inside the tire to a central receiver module.
Last year I bought a Tiguan L, and when I first started figuring out how to check the tire pressure, it was quite straightforward to find. First, start the car’s ignition, but don’t rush to drive. On the left side of the steering wheel, there’s a button resembling a directional key—press it to bring up the dashboard’s information display. Then, use the up and down buttons to scroll through the menu, and you’ll quickly see an option like ‘Tire Pressure Monitoring’ or ‘Tire Information.’ Simply select it, and the real-time tire pressure values will be displayed, including the pressure for each tire. Remember, if the tire pressure is abnormal, it will turn red and trigger an alarm. In such cases, it’s best to stop and check or add some air. Regularly monitoring tire pressure helps avoid tire wear and the risk of blowouts, which is crucial for driving safety. Especially before long trips, I always check it—once it becomes a habit, there’s nothing to worry about.
After driving a Tiguan L for several years, I'm quite familiar with the tire pressure display operation: After starting the vehicle, you can either operate through the central control screen by clicking the vehicle icon to enter the settings menu, selecting the 'Tires' or 'Vehicle Status' section where tire pressure data is clearly listed; or directly use the multifunction buttons on the steering wheel to navigate to the small screen in the middle of the instrument cluster. If the tire pressure is normal, it shows green numbers, and an alarm prompts if it's low, allowing me to notice immediately. This system is designed very user-friendly, taking just a few seconds to check. During daily commutes, I often take a quick glance to maintain proper tire pressure, which not only saves fuel but also reduces the risk of malfunctions.
