How to display the mileage on a Mercedes-Benz E300?

1 Answers
MacHannah
07/28/25 5:16pm
On the Mercedes-Benz E300, the mileage can be viewed in the trip section of the central instrument cluster. To check a single trip, swipe right on the left side of the steering wheel, then select the information on the right side of the instrument cluster. By swiping up and down, you can display the current total mileage, duration, average fuel consumption, average speed, instantaneous fuel consumption, etc. Extended relevant information is as follows: 1. The Mercedes-Benz E-Class is a mid-to-large-sized high-end business sedan, coupe, and station wagon developed by Mercedes-Benz, positioned between the C-Class and S-Class. 2. The Mercedes-Benz E-Class is available in sedan and station wagon body styles, with gasoline engine displacements ranging from 2.0 to 3.0 liters, and diesel engines are also optional.
Was this review help?
16
5
Share
More Forum Discussions

How to Change the Color of the Civic Dashboard?

The method to change the color of the Civic dashboard is as follows: 1. The color changes reflect the driving style. Green: fuel-efficient driving; Light green: moderate acceleration/deceleration; White: excessive acceleration/deceleration; 2. The color of the environmental meter changes based on the operation of the brake or accelerator pedal. This environmental meter is part of the fuel-efficient driving assistance system, helping drivers to drive more economically and improve fuel efficiency; 3. In fact, the ECO mode is more like an intelligent fuel-saving companion, guiding and reminding the driver to drive appropriately. When the optimal fuel supply is achieved, the dashboard will simultaneously display the green "ECO" indicator. If the accelerator pedal is pressed hard for acceleration or when encountering uphill sections, the "ECO" indicator will disappear.
2
0
Share

Is Kia a Joint Venture or Domestic Car?

Kia is a joint venture car. The advantages of joint venture cars and domestic cars are specifically introduced as follows: Introduction to Domestic Cars: Domestic cars refer to cars designed by Chinese people, manufactured by Chinese people, with independent intellectual property rights, and under Chinese brands. Advantages of Domestic Cars: The biggest advantage of domestic cars is their affordability—they are cheaper in terms of the whole vehicle, parts, and even repair labor costs. Due to the lack of good roads in China, which are not suitable for high-speed motorcycle operation (there are too many cars on highways with high speeds, which is not conducive to safety), to prevent motorcycle users from speeding or operating at high speeds in daily use, the design speed of domestic cars generally does not exceed 120Km/h, thereby ensuring safety.
4
2
Share

What does EV mode mean in hybrid vehicles?

EV mode refers to the pure electric mode of hybrid vehicles. Below are the functions of EV mode and an introduction to hybrid vehicle modes: Functions of EV mode: When the vehicle is switched to this mode, it will be driven solely by the electric motor, typically used in urban congested areas. Many hybrid vehicles are equipped with EV mode, significantly reducing fuel consumption. Introduction to hybrid vehicle modes: EV mode: Pure electric drive, automatically activates the engine when battery is low to drive and recharge the battery. The engine automatically shuts off when the battery reaches a certain level. ECO mode: Achieves fuel efficiency and environmental friendliness through coordinated operation of the engine and motor, providing smooth driving comfort. PWR mode: Delivers powerful performance through dual-engine drive by both the engine and motor, allowing for more dynamic driving.
9
2
Share

What does 'car' mean on a vehicle?

On a vehicle, 'car' refers to the vehicle's onboard computer information, which is used to quickly access the car system settings interface. Pressing this button allows the multimedia central control screen to directly switch to display the car system interface. Within this interface, various vehicle settings can be adjusted, such as driving mode selection, seat and air conditioning adjustments, parking assistance systems, settings, and services. Different buttons on the vehicle have different functions: 1. The SEL button is a menu selection confirmation button, typically located on the multifunction steering wheel; 2. The OK button has the exact same function as the SEL button, with some vehicles using SEL and others using OK; 3. The AC button is the compressor switch, which is the air conditioning cooling switch.
19
4
Share

What are the signs that manual transmission fluid needs to be replaced?

Manual transmission fluid should be replaced immediately when it shows signs of deterioration, such as turning black, becoming thick, or emitting unusual odors. The following points should be noted when changing transmission fluid: 1. Use different oils for the transmission and rear axle. Due to differences in material and structure between the transmission and rear axle gears, separate oils should be selected to ensure that transmission seals do not leak, copper components are not corroded, and rear axle gears receive adequate lubrication. 2. Choose the right viscosity. If the viscosity is too high, it can cause overheating of friction surfaces and unnecessary power loss. If the viscosity is too low, centrifugal force may cause the oil to be thrown off the gear surfaces, leading to oil seal leaks and insufficient lubrication on gear surfaces. This can increase wear and even cause sintering, making the selection of appropriate viscosity crucial.
9
3
Share

How to Remove the Wiper Blades on a Buick Excelle?

Buick Excelle wiper blade removal method: The Excelle features a U-shaped wiper arm interface. To remove it, first push the wiper blade toward the base of the wiper arm until it completely detaches from the arm interface, then pull it out in the opposite direction. Before pulling it out, rotate the movable wiper blade strip slightly; otherwise, it may encounter resistance during removal. Note that many wiper blades are very tight during removal, so avoid using excessive force to prevent damage to the wiper interface or your hands. The installation process is similar: first insert the wiper blade interface into the wiper arm. For beam-style wiper blades, ensure the wiper arm clip passes through the blade's frame during this step. Then, pull the U-shaped connector upward into the U-shaped clip. Sometimes, you may hear a crisp click, indicating proper installation.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.