How to Display Fuel Consumption on CHR?

1 Answers
DiLucy
07/29/25 10:54am
CHR's fuel consumption display can be set using the buttons on the steering wheel. Below is relevant information about fuel consumption: 1. A vehicle's fuel consumption level is closely related to road conditions and driving habits: During winter and summer, fuel consumption tends to be generally higher because using air conditioning in summer creates greater engine resistance, while in winter, lower temperatures result in poorer gasoline atomization and combustion efficiency, leading to increased fuel consumption. 2. It's important to maintain proper driving habits while using the vehicle: Avoid prolonged idling as it can cause carbon buildup in the engine, which increases fuel consumption. Proper driving habits not only reduce fuel consumption but also extend the engine's service life.
Was this review help?
14
0
Share
More Forum Discussions

What car brand has a logo resembling an X?

The car logo featuring a capital letter X is the Reiz. Here are more details about the Reiz: 1. The Reiz is the domestic name for the Japanese Toyota MARK-X model. It was produced in October 2005 at Tianjin FAW Toyota's second plant, sharing the production line and chassis with the Crown, and equipped with the same six-speed automatic transmission as the Crown. 2. The Reiz is powered by two powertrains: the Toyota 5GR-FE-V6 all-aluminum engine and the 3GR-FE-V6 all-aluminum engine, both featuring DOHC dual overhead camshafts and DUAL-VVT-i technology.
19
3
Share

What brand is the Chevrolet Orlando transmission?

Chevrolet Orlando transmission is a brand independently developed by General Motors. The transmission is a mechanism used to change the speed and torque from the engine, and it can fixedly or stepwise change the transmission ratio of the output shaft and the input shaft. Taking the 2020 Orlando as an example, its body dimensions are: length 4684mm, width 1807mm, height 1628mm, wheelbase 2796mm, and fuel tank capacity 45l. The 2020 Orlando is equipped with a 1.3T turbocharged engine, with a maximum power of 120kW and a maximum torque of 230Nm, matched with a 6-speed manual/automatic transmission.
18
5
Share

What engine is in the Chevrolet Orlando?

Chevrolet Orlando is equipped with a 1.3T turbocharged engine, paired with either a 6-speed automatic DSS intelligent start-stop transmission or a 6-speed manual intelligent start-stop transmission. It delivers a maximum power of 120kW and a maximum torque of 230Nm, with performance comparable to a 2.0L naturally aspirated engine. The engine maintains robust power output within the RPM range of 1800 to 4400. The Chevrolet Orlando is a compact SUV launched by Chevrolet. It comes standard with four-wheel independent suspension, Michelin Primacy 3ST tires, and an adjustable EPS electric power steering system, ensuring body stability and solid chassis feedback during cornering and rapid lane changes.
1
0
Share

Do White Cars Need Coating?

White cars do need coating. White car paint is not resistant to dirt, and over time, oxidation can cause the paint to turn yellow. Coating can make the car's surface brighter, and even if minor scratches occur, the damage to the car's surface is minimal. Therefore, it is necessary to coat a new white car. The method of coating includes: 1. Using clay bars to remove dirt from the car's paint surface; 2. Applying the coating material evenly on the paint surface with a sponge; 3. After drying, wiping off excess material with a special towel. The composition of the coating agent includes: glass fiber, silicon polymer, fluorine polymer, and high-purity water non-petroleum environmental materials.
11
5
Share

Is the Sylphy an A-class or B-class car?

The Sylphy is an A-class car, specifically a compact sedan with a body length of 4641mm, width of 1815mm, height of 1450mm, and a wheelbase of 2712mm. The entire Sylphy lineup is equipped with a 1.6L naturally aspirated engine, codenamed HR16. The engine delivers a maximum power of 99kW and maximum torque of 159Nm, with peak power achieved at 6300 rpm and peak torque at 4000 rpm. This engine features EVTC technology and multi-point fuel injection, utilizing an aluminum alloy cylinder head and block. It is paired with a CVT transmission.
12
3
Share

What grade of engine oil should be used for the new Sylphy?

The new Sylphy uses 5w30 grade engine oil, and the original specification oil of this grade can be used. Engine oil, also known as engine lubricant, serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption for the engine. It is composed of base oil and additives. 5W30 indicates the viscosity grade of the engine oil. W stands for Winter, and 5W represents the oil's flow performance at low temperatures. The smaller this number, the better the oil's low-temperature fluidity. 30 represents the high-temperature viscosity grade of the oil, and the higher this number, the better the oil's protective performance for the engine at high temperatures.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.