How to decelerate in Subject 3?
2 Answers
In Subject 3, the correct deceleration technique should be chosen based on the vehicle speed and the surrounding environment. Normally, decelerating a manual transmission vehicle requires coordination between the brake pedal and the clutch. There are two techniques for using the brake pedal: drag braking and intermittent braking. Below are the relevant explanations: 1. Intermittent braking: Lightly press the brake pedal and then release it. It is important to press gently and gradually. You can also press the brake pedal lightly multiple times, meaning pressing and releasing the brake alternately to gradually reduce the speed to an appropriate level. 2. Technique: In Subject 3, it is best to increase the speed slightly before using intermittent braking, otherwise, pressing too hard can easily cause the engine to stall. For example, when approaching a crosswalk, accelerate first to increase the speed, then apply intermittent braking at a certain distance to reduce the previously increased speed. Note that when the gear is matched, the intermittent braking should be more pronounced, otherwise, the system might not detect it. 3. Drag braking: Gently press and hold the brake pedal to pass through, similar to what some instructors call 'light and prolonged braking.' 4. Technique: For tasks such as turning left or right at intersections or passing bus stops, simply engage the gear and press the brake pedal to ensure the system detects the deceleration action in the appropriate sections.
When it comes to slowing down in Subject 3, I used to struggle with it during my driving lessons, and now I'd like to share some insights. Slowing down isn't about slamming on the brakes; it requires anticipation. For example, when you see a stop sign or a turning point, ease off the accelerator and then lightly tap the brake to maintain a steady speed. For manual transmission cars, you need to coordinate with the clutch in a semi-engaged state—don't rush it to avoid stalling. The most common point deduction during the test is on the slope for a designated stop, where failing to slow down properly can cause the car to roll and lose points. I remember during my first test, I almost hit a pole during parallel parking because I didn't slow down in time. The key is to look ahead, observing road conditions about 20 meters away. Developing this habit makes driving much safer.
