How to Deal with Strong Odor in a Newly Purchased Car?

1 Answers
Sidney
07/29/25 3:57pm
Solutions for strong odor in a new car: 1. Keep the windows open for extended periods to allow the smell to dissipate gradually; 2. Activated charcoal can absorb harmful gases when the car is not in use. If the odor does not improve after using activated charcoal for a while, it should be replaced promptly. It is recommended to use at least 3 packs of activated charcoal in a car; 3. Use a car air purifier, preferably one with replaceable filters for repeated use; 4. Use grapefruit peels to absorb formaldehyde, though this is only effective for a short time. Grapefruit peels have a natural, mild fragrance, unlike strong perfumes; 5. Turn on the air conditioning in external circulation mode.
Was this review help?
7
3
Share
More Forum Discussions

How Often Should a Car's Air Conditioning System Be Recharged with Refrigerant?

This requires the owner's judgment and observation. It's not advisable to recharge the refrigerant simply because the car's air conditioning cooling performance has declined, as there could be other reasons for the reduced cooling efficiency. Essentially, every car experiences minor leaks to some extent, but the severity varies. Generally, if a new car's air conditioning has been functioning well for several years with regular cleaning and maintenance, but the cooling effect has diminished, it's recommended to first inspect the air conditioning system before adding refrigerant. Below is more related information on how to determine if a recharge is needed: Methods to Determine if Refrigerant Recharge is Necessary: 1. Check the sight glass on the receiver-drier to assess if refrigerant needs to be added. During normal operation of the air conditioning, if bubbles continue to appear in the sight glass, it indicates a lack of refrigerant and the need for a recharge. If there are numerous bubbles in the sight glass, it signifies a severe shortage of refrigerant, necessitating a leak check, repair of the leaking component, and then a proper recharge. 2. There are two methods to recharge a car's air conditioning system with refrigerant: high-pressure side charging or low-pressure side charging. These methods are not the same. High-pressure side charging involves adding liquid refrigerant, characterized by safety and speed, and is suitable for the initial charge of the refrigeration system—specifically after leak detection and vacuum evacuation. Note that this method must be performed with the compressor off and the engine stopped, and the refrigerant cylinder must be inverted.
13
3
Share

The Difference Between Volkswagen 330TSI and 380TSI

The differences between Volkswagen 330TSI and 380TSI are as follows: In summary, the main differences between Volkswagen 330TSI and 380TSI lie in the maximum power and torque of the two engines. The 380TSI has higher torque and belongs to a higher vehicle class. The xxTSI naming convention is a distinctive feature of Volkswagen, where the numbers represent the torque value in Newton-meters, and TSI stands for the engine technology type. The 330TSI model is equipped with a low-power 2.0T engine codenamed EA888. This engine has a maximum power of 137kW, a maximum torque of 320 Nm, a maximum power speed of 5000 rpm, and a maximum torque speed ranging from 1600 to 4000 rpm. This engine features hybrid injection technology and uses an aluminum cylinder head. The 380TSI model is equipped with a high-power 2.0T engine also codenamed EA888. This engine has a maximum power of 162kW, a maximum torque of 350 Nm, a maximum power speed ranging from 4500 to 6200 rpm, and a maximum torque speed ranging from 1500 to 4400 rpm. This engine features direct fuel injection technology and also uses an aluminum cylinder head. The injection technologies of the 330TSI and 380TSI engines differ. The 380TSI employs both direct fuel injection and intake manifold injection technologies, while the 330TSI only uses direct fuel injection. The intake manifold injection technology effectively removes carbon deposits on the valves. Additionally, the 380TSI is equipped with an integrated load cylinder head, which the 330TSI lacks. Volkswagen's rear badges come in five variants: 180, 230, 280, 330, and 380, corresponding to engine displacements of 1.6L, 1.4T, 1.8T, 2.0T, and 2.0T, respectively. The 'L' denotes a naturally aspirated engine, while 'T' signifies a turbocharged engine.
7
2
Share

How to Issue a Car Repair Invoice?

Repair fees should be issued as a regular invoice. According to current tax regulations, a value-added tax (VAT) special invoice or a unified invoice for the repair and maintenance industry can be issued.
20
5
Share

What Fault Causes the Engine Malfunction Light to Stay On?

The engine malfunction light may stay on due to the following 7 main reasons: Sensor malfunction: The sensors mentioned here include those for coolant temperature, crankshaft position, air flow, intake air temperature, oxygen, etc. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot accurately obtain engine data, which can trigger the engine malfunction light. Fuel quality issues: Failure to add fuel and engine oil as required by the manufacturer may cause engine wear, leading to the malfunction light turning on. Poor combustion of the air-fuel mixture: Poor combustion can cause engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the malfunction light will illuminate as a warning. Spark plug failure, ignition coil failure, fuel pump failure, and fuel line blockage can all lead to poor combustion of the engine's air-fuel mixture. Turbocharging issues: The intake turbocharging pipeline and turbocharger can also cause the engine malfunction light to illuminate. The most common issue is turbocharger damage, accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, and blue or black smoke from the exhaust pipe. Intake issues: If the vehicle's intake system encounters problems, it may lead to engine pipeline blockage, and in severe cases, trigger the engine malfunction light. A dirty air filter that is not cleaned regularly can cause intake problems. Exhaust issues: Exhaust system faults can also cause the engine malfunction light to illuminate. The rear oxygen sensor, three-way catalytic converter, exhaust camshaft, and bearing failures are all potential causes of exhaust problems, with the three-way catalytic converter being the most common. Using leaded gasoline, lead or silicon-containing lubricant additives, physical damage to the catalytic converter, or fuel supply system failures can easily lead to three-way catalytic converter issues. Anti-theft system malfunction: If the vehicle's electronic anti-theft system fails, or if the anti-theft controller does not match the engine electronic controller, the anti-theft system can prevent the engine from operating normally and cause the malfunction light to illuminate. If the engine malfunction light is on, follow these steps: First, check if the engine is running normally, looking for symptoms such as shaking or smoke. If present, avoid restarting the engine. Note: Do not restart the engine if the red warning light is on. If the engine can be started, turn it off and wait 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the 'on' position without depressing the clutch. The vehicle will perform a self-check upon powering up. Observe the dashboard after 5-10 seconds to see if the malfunction light turns off. If the light remains on, visit a service station as soon as possible for diagnosis. The service station can use a portable diagnostic tool to read the fault codes, identify the issue, and perform targeted repairs.
2
4
Share

How to Solve Three-Cylinder Misfire?

It is recommended to check whether the fuel supply system has insufficient fuel supply and whether the spark plug ignition is normal. At this time, you should go to a professional repair institution for timely inspection and replacement of damaged parts.
5
3
Share

How to Properly Start a Toyota RAV4 Automatic Transmission?

Before getting in the car, walk around the vehicle to check the surrounding environment. Then open the door, get in, adjust the seat, and fasten the seat belt. After shifting to D gear, release the handbrake and press the accelerator to complete the start.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.