How to Deal with Fog on the Windshield?

1 Answers
VioletMarie
07/24/25 10:07am
Methods to defog the windshield include: turning on the heater, opening the windows, using chemical products, and cooling to remove fog. Here are the details: Using the Heater to Remove Fog: In northern regions, after clearing snow from the vehicle, a thin layer of fog often remains on the windows. Turning on the heater at this time will quickly clear the fog. Some vehicles have a one-touch defogging feature, which also uses this principle to achieve defogging. Opening the Windows to Remove Fog: Sometimes, the fog on the windshield is caused by the hot air exhaled by passengers. Opening the windows can dissipate the hot air. However, this method works well in the south but is not recommended in the north, as the cold air from opening the windows is unbearable for many. Using Chemical Products to Remove Fog: These can be purchased at many 4S stores and auto repair shops. Applying the chemical product to the windshield prevents further fogging. Cooling to Remove Fog: The reason the windshield fogs up is due to the temperature difference between the inside and outside of the glass. Adjusting both temperatures to a similar level will naturally eliminate the fog.
Was this review help?
8
0
Share
More Forum Discussions

How Long Is the Warranty Period for Car Headlights?

Generally, the warranty period is three years. Below is the relevant information: Car Headlights: Car headlights are essential lighting devices for every vehicle. While driving, headlights not only serve the purpose of illumination but also function as warning signals to alert oncoming vehicles about turning, stopping, etc. The state has clear regulations regarding car warranties: the warranty period for household vehicles must not be less than 3 years or 60,000 kilometers, whichever comes first. Therefore, when using headlights, car owners must pay attention to their condition and promptly repair or replace them if issues arise to avoid unnecessary expenses. Maintenance Tips: Since car headlights are installed outside the vehicle and are prone to damage, daily maintenance is crucial. Ensure that the headlight covers have good sealing to prevent water ingress, which could cause short circuits in the bulbs. Additionally, keep the headlight covers clean to maintain good light transmission. Finally, consider using iodine-added halogen bulbs, which can extend the lifespan of the headlights.
3
3
Share

Do Cars Have a Reserve Fuel Tank?

Cars generally have a reserve fuel tank. The methods to open the fuel tank are as follows: Mechanical key opening: This is usually seen in some rugged off-road vehicles. Modern family cars generally do not use mechanical keys for opening because it is relatively complicated to operate. In-car switch method: The in-car fuel tank switch is located in different positions depending on the car model. Some may be on the floor to the left of the driver's seat, some on the left front door panel or the central console, all marked with a fuel pump symbol. However, it's important to note that the in-car switch can easily lead to the owner forgetting to turn off the engine before refueling, so always remember to turn off the engine before refueling. Press-to-open method: The press-to-open fuel tank door is currently the most convenient method. The owner only needs to park the car, and the fuel attendant can press to open the tank for refueling. However, when not parked for refueling, always remember to lock the central control, otherwise the fuel tank cap can be opened.
11
3
Share

Why is one side of the car air conditioning cold while the other is not?

One side of the car air conditioning being cold while the other is not is due to a fault in the air vent, where one of the servo motors of the air vent is damaged, causing one side of the air conditioning to not cool. Another reason could be that the air valve plate is stuck, hindering its rotation and affecting the airflow on one side, or there might be a blockage in one of the air conditioning ducts. Solutions for one side of the car air conditioning being cold while the other is not: If the issue is with the air vent, the servo motor of the air vent needs to be replaced. If the air valve plate is stuck, it is necessary to visit a repair shop for inspection and repair. Maintenance methods for car air conditioning: Regularly check the refrigerant and compressor oil, clean the surface of the condenser, and clean the surface of the evaporator. The car air conditioning system, abbreviated as car AC, consists of a refrigeration system, heating system, ventilation and air purification devices, and a control system. Functions of car air conditioning: It adjusts and controls the temperature, humidity, air cleanliness, and airflow inside the car cabin to a comfortable state, providing a pleasant riding environment for passengers and reducing travel fatigue. It also creates favorable working conditions for the driver and plays a crucial role in ensuring safe driving as a ventilation device.
13
5
Share

Abnormal Noise from Car Air Conditioner Blower?

It may be caused by the blower blades hitting debris. Here is a detailed introduction to the relevant content: Introduction: The car air conditioning system includes the compressor, dryer, evaporator, high and low pressure pipes, and expansion valve. Typically, the air conditioning cycle involves four processes: compression, condensation, expansion, and evaporation. Ordinary air turns into low-temperature, low-pressure gas after these processes, and the blower's role is to blow this gas out through the air conditioning vents. Troubleshooting: Remove the dust filter cover on the drain trough cover and take out the dust filter. Turn on the blower switch to make it rotate, and observe that there is no debris around the blower impeller, indicating that the noise is not caused by the first reason. After removing the central vent, listen again and feel that the noise is coming from inside. Remove the entire dashboard, then take out the middle connecting piece of the air conditioning duct. It is found that there is a layer of sponge attached to the temperature adjustment flap, with a black plastic film glued to it. Half of this plastic film has separated from the sponge on this car, and when the blower is working, this black plastic film flutters in the airflow, causing the abnormal noise.
16
4
Share

Can Car Window Tinting Be Redone If Not Done Properly?

If there are issues during the tinting process, such as impurities in the film, you can request a redo. Below is a detailed introduction to the relevant content: Tinting steps: Clean the glass, spray a small amount of installation liquid on the outer surface of the glass, cover it with the window film, and trim the film along the edges. Use a portable heat gun to precisely shape and shrink the film. After heat shaping, clean the inner surface with a strong liquid cleaner and scrub off the oil with a nylon soft pad. Remove the protective film, spray installation liquid on the adhesive surface of the window film and the inner surface of the glass, apply the film to the glass, reposition it, spray installation liquid again, and use specialized tools to remove the installation liquid. Precautions: Avoid washing the car within three days after tinting to prevent the film from peeling off due to moisture. After tinting, do not roll down the side windows for 24 hours in summer and 48-72 hours in winter. The film, not yet fully bonded, is prone to displacement. If bubbles are found, they should be addressed within 24 hours at a professional car beauty and maintenance shop. After applying sun protection and heat insulation film, avoid using strongly adhesive labels directly on the film for one month.
20
4
Share

Under What Circumstances Should the Car's Eco Mode Be Used?

Car's eco mode is used in urban traffic congestion conditions. The eco mode is divided into active eco driving mode and non-active eco driving mode. The active eco mode usually has a button, allowing the owner to choose whether to enable it. The non-active eco mode does not have a dedicated button and serves to remind the owner to save fuel. When optimal fuel supply is achieved, the dashboard will display a green 'eco' indicator. If the accelerator is pressed hard for rapid acceleration or when encountering uphill sections, the 'eco' indicator will disappear. The working principle of the eco mode mainly involves analyzing various configurations that affect fuel consumption, such as transmission gear, engine speed, braking system, and transmission oil temperature, through various sensors. Then, the ECU calculates a lower fuel supply for the engine, effectively reducing fuel consumption compared to normal driving mode. Whether the car engine operates at long-term idle or high-speed driving, carbon deposits will form. The carbon deposits produced when working in eco mode are basically similar to those in normal operation. Carbon deposits increase only when the engine's air-fuel mixture is too rich, combustion is poor, or when low-quality fuel is used. Therefore, the eco mode can be used with confidence when enabled.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.