How to Deal with Fog Inside Car Windows?

1 Answers
MacOwen
07/29/25 8:15pm
When there is a significant temperature difference between the inside and outside of the car, fog can form on the inside of the windows. The specific solutions are as follows: 1. Car defogging spray: Evenly spray the defogging agent on the inner surface of the car window and wipe it clean. 2. Soap method: Moisten the soap slightly to soften it, clean the glass thoroughly, then evenly apply the soap over the entire glass surface and wait for it to dry. 3. Open windows for air circulation: Open a small gap in the side windows to allow air to circulate between the inside and outside of the car, reducing the temperature difference and gradually dissipating the fog. 4. Use warm air to defog: Adjust the air vent mode to blow towards the front windshield and increase the temperature. The principle is to heat the car window, causing the water vapor attached to it to evaporate, thereby achieving the defogging effect.
Was this review help?
10
1
Share
More Forum Discussions

Are Hyundai engines domestically produced or imported?

Hyundai engines are domestically produced by Beijing Hyundai Mobis Auto Parts Co., Ltd. The engine models used by Hyundai include G4FL, G4LD, etc. The G4FL engine has a maximum horsepower of 115 hp, a maximum power of 84.5 kW, a maximum power speed of 6300 rpm, and a peak torque of 143.9 N·m. The G4LD engine has a maximum horsepower of 140 hp, a maximum power of 103 kW, a maximum power speed of 6000 rpm, and a peak torque of 211 N·m. For daily maintenance of Hyundai engines, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB_CD grade diesel engine oil should be selected according to the mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, causing various problems for the engine. To avoid faults, change the oil regularly according to usage conditions and keep the oil level moderate; When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve, bringing contaminants back to the lubrication area, accelerating engine wear and internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acid, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, blocking filters and oil holes, making engine lubrication difficult and causing wear; Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and engine.
4
3
Share

How many seconds does the Triumph 660 take to accelerate from 0 to 100 km/h?

The Triumph 660 takes 14 seconds to accelerate from 0 to 100 km/h. Here is a detailed introduction about it: Introduction 1: The word "Trident" itself means "three-pronged spear," referring to the classic weapon held by the sea god Poseidon. Introduction 2: In the Triumph TRIENT-660 model, the trident not only carries the meaning of "divine weapon" but also subtly refers to the three-cylinder engine it is equipped with. Introduction 3: The single round headlight is one of the classic design elements of retro motorcycles, and the TRIDENT-660 also follows this tradition.
5
4
Share

What is the top speed of the BYD Han?

The top speed of the BYD Han is 200 kilometers per hour. Below is relevant information about the BYD Han: Introduction: The BYD Han is a flagship new energy vehicle launched by BYD Auto in 2020, marking BYD's new energy vehicles moving towards the mid-to-high-end market. Vehicle Design: The BYD Han adopts the family design language of BYD's Dynasty series, inspired by the Chinese dragon, symbolizing not only speed and power but also leadership. The front face features a closed design, presenting a simple and elegant appearance. Unlike previous models, the new design transforms the dragon's mouth into a flat design, lowering the front stance. Combined with horizontal lines, the entire front end achieves a very low and aggressive visual effect.
16
4
Share

What level is the Volkswagen Teramont model?

The Volkswagen Teramont is classified as a mid-to-large size SUV. Its body dimensions are: length 5039mm, width 1989mm, height 1773mm, with a wheelbase of 2980mm. It features a fuel tank capacity of 70 liters and a trunk capacity of 286 liters, with a curb weight of 2005kg. The Teramont employs a MacPherson strut independent front suspension and a multi-link independent rear suspension. It is powered by a 2.0T turbocharged engine delivering maximum horsepower of 186PS (137kW) and peak torque of 320Nm, paired with a 7-speed dual-clutch transmission.
14
3
Share

What clothes are not allowed to wear for the driving test?

There are no specific requirements for clothing during the driving test. Here are the relevant details: 1. Driving Skill Certificate: For first-time applicants of a motor vehicle driver's license or those applying for additional permitted vehicle types, the vehicle management department will issue a driving skill certificate within one day after passing the assessment. 2. Cancellation of test results: If the test is not completed within the validity period, the test results will be canceled. 3. Test scheduling: During the validity period of the driving skill certificate, the number of scheduled tests for subjects two and three must not exceed five times. 4. Failing the test: If the fifth test attempt still results in failure, the test results will be deemed as unsatisfactory.
18
3
Share

What is the difference between Shelby and Mustang?

The differences between Shelby and Mustang are: 1. Different engines: Shelby is equipped with a 2.3T turbocharged engine; Mustang is equipped with a 5.8L supercharged engine. 2. Different horsepower: Shelby has a maximum horsepower of 314ps; Mustang has a maximum horsepower of 671ps. 3. Different power: Shelby has a maximum power of 231kW; Mustang has a maximum power of 494kW. 4. Different torque: Shelby has a maximum torque of 434Nm, with the maximum torque at 3000rpm; Mustang has a maximum torque of 855Nm, with the maximum torque at 4000rpm.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.