···
Log in / Register

How to Deal with Fog Inside a Car?

1 Answers
Mabel
07/28/25 10:35pm

When there is fog inside the car, you can open the windows slightly on both sides to create air convection, which helps to blow away the moisture and reduce the likelihood of water adhering to the glass. This is an environmentally friendly and cost-effective method for defogging. Since visibility is significantly reduced in foggy conditions, many modes of transportation become unusable. In addition to opening windows for convection defogging, there are other effective methods to remove fog inside the car: You can use a defogging agent. Spray the defogging agent onto the inner surface of the car glass and then wipe it clean. While removing dirt from the glass, it also forms a protective film that prevents moisture from condensing into a fog layer on the glass. One application of the defogging agent can typically prevent fog for about ten days.

Was this review help?
19
1
Share
More Forum Discussions

What are the reasons why the BYD S6 cannot start?

The reasons why the BYD S6 cannot start may include abnormal car gear position, insufficient battery voltage, etc. The following is a detailed introduction about BYD automobiles: 1. Overview: BYD is a Chinese automobile brand established in 1995, mainly producing commercial cars, family cars, and batteries. Starting with a scale of more than 20 people, it grew into the world's second-largest rechargeable battery manufacturer in 2003, and in the same year, it established BYD Auto. 2. Others: The design of BYD automobiles not only draws on advanced concepts from international trends but also conforms to the aesthetic concepts of Chinese culture. The new BYD logo will no longer use the original blue and white color scheme, and the pattern has been changed to an elliptical shape with the addition of light and shadow elements.
8
3
Share

What is the speed corresponding to C1 gear?

The speed corresponding to C1 gear is as follows: 1. First gear: corresponding speed is 10-20km/h. 2. Second gear: corresponding speed is 20-30km/h. 3. Third gear: corresponding speed is 30-40km/h. 4. Fourth gear: corresponding speed is 40-50km/h. 5. Fifth gear: corresponding speed is above 60km/h. Additional information: Precautions during the test: If the clutch pedal is not fully depressed when shifting gears, the system will not detect the gear shift signal and will assume the vehicle is still in the current gear, leading to speed mismatch and point deduction. To avoid incomplete or untimely gear shifting, master the key points of gear shifting: timely, correct, smooth, and quick. Shift gears promptly, depress the clutch correctly, engage gears smoothly, and complete the entire shifting process swiftly and neatly.
9
2
Share

Where is the Bluetooth switch located in the older Hyundai ix35 model?

The Bluetooth switch in the older Hyundai ix35 model is located on the car's central control display screen. The Hyundai ix35 is an SUV model. Below is a detailed introduction about the Hyundai ix35: Overview: The Hyundai ix35 is an SUV model. The Hyundai ix35 was introduced as the successor to the Tucson model and officially launched for domestic production in 2010. It has a wheelbase of 2640mm. The vehicle dimensions are 4420mm x 1820mm x 1690mm. Other specifications: The trunk capacity is 465L. The fuel consumption is 6.8 liters per 100 kilometers. The fuel tank capacity is 55L. The standard seating capacity is 5. The top speed is 185km/h. The seat material is leather. The acceleration time is 10.4 seconds (0-100km/h). The drivetrain is front-wheel drive.
2
0
Share

What are the functions of the new Haval H6 key?

The new Haval H6 key has functions such as unlocking, opening the trunk, and locking. Additionally, the Haval H6 car key also features a vehicle locating function. When the vehicle is in anti-theft mode, pressing the "Locate Vehicle" button will trigger a long beep and the turn signals will flash for 15 seconds. Here is more information about the Haval H6: 1. Positioning: The Haval H6 is the flagship model of the Haval brand, positioned as a compact SUV. 2. Dimensions: The body dimensions are 4600mm in length × 1860mm in width × 1720mm in height, with a wheelbase of 2680mm. 3. Powertrain: It is equipped with two turbocharged engines: a 1.5T L4 and a 2.0T L4. The former has a maximum horsepower of 169 PS and a maximum torque of 285 N·m, while the latter has a maximum horsepower of 224 PS and a maximum torque of 385 N·m. Both engines are paired with a 7-speed dual-clutch transmission.
6
2
Share

Where is the Bluetooth switch located in the old Mazda6?

The Bluetooth switch in the old Mazda6 is located in the car's center console area. The Mazda6 is a model of Mazda vehicles. Here is a detailed introduction about Mazda vehicles: Overview: Mazda, officially known as Mazda Motor Corporation (listed on the Tokyo Stock Exchange as TYO), is a Japanese multinational automobile manufacturer. Its business scope includes passenger cars, automobile manufacturing, and sales. Models: Mazda's global passenger car lineup includes: SUV series CX-3, CX-30, CX-4, CX-5, CX-8, CX-9, MX-30; Sedan series Mazda3, Mazda6 (known as "Atenza" by FAW Car); Sports car MX-5.
5
5
Share

Will Long-Term Parking on a Slope Have Any Impact?

Long-term parking on a slope does have an impact. Due to gravity, the vehicle body will tilt to one side, causing the center of gravity to press on the suspension on that side. This can lead to wear and tear on the suspension of either the left or right wheels. Additionally, it affects the effectiveness of the handbrake. Below are the detailed impacts: 1. Impact on handbrake effectiveness: When parked on a slope, the handbrake cable continuously bears the component of the vehicle's weight parallel to the slope. Over time, this can cause the handbrake cable to 'fatigue,' reducing its effectiveness or even causing it to fail, which may lead to unintended vehicle movement if not addressed. 2. Suspension aging: When parking on a slope, the suspension on the downward side of the slope bears more pressure. Prolonged exposure to this condition can result in uneven aging and varying stiffness between the front and rear suspensions, affecting ride comfort. 3. Risk of vehicle rolling: Long-term parking on a slope can cause the handbrake to age and fail, increasing the risk of the vehicle rolling away.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.