How to deal with a missing piece on the tire sidewall?

2 Answers
OKathryn
07/29/25 4:46am
Regarding the specific handling methods for a missing piece on the tire sidewall: 1. If a piece of rubber is scraped off the sidewall of a car tire, it can be repaired using a special steel plug for the tire sidewall: The advantage of using a mushroom plug repair is that it can both restore the airtight layer and tightly fill the perforation in the tire body, ensuring a more durable repair effect. 2. Some small sidewall damages have repair value: Small perforations will not break the cords in the fabric layer, and the tire can still be used after repair. 3. If the piece of rubber scraped off is on the tire tread and has not reached the wear indicator, no treatment is needed: The tire wear indicator is located at the bottom of the grooves on the tire's surface. Tires are made of rubber material, which will age and wear. If the tire wears down to the wear indicator, it needs to be replaced.
Was this review help?
2
1
Share
PrestonFitz
08/12/25 8:27am
If a piece is missing from the sidewall of your tire, you must never take it lightly. As someone who has driven for over a decade, I've seen too many accidents caused by sidewall damage leading to blowouts. The sidewall is the most vulnerable part of the entire tire because it bears the greatest pressure. Once damaged, it's prone to rupture at high speeds. You should immediately pull over to a safe location, such as a highway service area or an empty roadside spot, and definitely not continue driving. Put on the spare tire and drive to the nearest repair shop for inspection. Generally, mechanics will tell you that you must replace the tire because repairing the sidewall is too risky. When driving normally, be careful to avoid sharp stones or deep potholes on the roadside, and regularly inflate your tires to prevent aging, which can reduce such accidents. Safety comes first—spending a few hundred dollars on a new tire is much better than getting into an accident.
Was this review help?
6
2
Share
Expand All
More Forum Discussions

How to Replace the Elastomeric Coupling of the Langdong?

Langdong elastomeric coupling replacement steps are as follows: 1. First, use a pry bar to open the left panel of the driver's seat; 2. Remove the two cross screws on the side panel first; 3. Remove the screw above the throttle first, then pry outward along the gap, remember not to pry downward; 4. Remove the screw above the wiper control switch above the light control switch; 5. Then remove the steering ball joint screw under the clutch and brake pedal; 6. Remove a through screw below the steering gear; 7. Disconnect all wiring harness connectors on the steering gear; 8. Remove the two screws under the dashboard; 9. Use a T30 screwdriver to remove the three screws to see the elastomeric coupling gear.
10
4
Share

What does RND mean in a vehicle?

RND in a vehicle refers to the gear positions on an automatic transmission car, where RND stands for: 1. R gear is the reverse gear, used for reversing. When reversing, it is essential to observe the surroundings carefully, check the left and right rearview mirrors, and reverse slowly. 2. N gear is the neutral gear, used when the car is idling at a traffic light. Do not coast in N gear for an extended period as it can cause wear and tear on the transmission, reducing its lifespan. 3. D gear is the drive gear, the most commonly used gear in automatic transmission cars. When the car is in D gear, the transmission automatically shifts gears based on the vehicle's speed and road conditions, greatly facilitating the driver's operation.
6
3
Share

What to Do When the Diagonal View is Delayed During Parallel Parking?

Turn on the right turn signal and align the right 1/3 position of the car hood with the edge of the parking space to maintain a distance of about 30cm between the car body and the edge of the parking space. Turn on the right turn signal, shift into reverse gear, and slowly release the clutch. When the car starts moving, keep the left foot steady. Start moving directly. When the left corner of the car touches the left edge line, straighten the steering wheel. When the left 1/3 of the car hood aligns with the edge line, turn the steering wheel one full turn to the right.
16
3
Share

What's the reason for the sudden failure of the windshield wiper?

If the wiper cannot move, it indicates a malfunction. You can try opening the hood to check if the transmission linkage is dislocated or inspect whether the fuse is intact. If the fuse is intact but there is no voltage at the motor, check the wiring and the turn signal combination switch for any issues. Generally, a burnt motor will emit a burnt smell. If there is normal voltage at the wiper motor when the power is turned on, the motor may be damaged. Wiper maintenance methods: 1. When using the wiper to remove dust from the windshield on sunny days, always spray windshield washer fluid and avoid dry wiping. 2. To ensure good wiping performance, use the designated windshield washer fluid and never use plain water as a substitute. 3. If there are other stubborn or hard contaminants on the glass, remove them manually.
9
1
Share

How many colors does the Jatu im6 have?

The Jatu im6 is available in 5 body colors: Starlight Silver, Celestial Orange, Galaxy Silver, Meteor Brown, and Cloud White. Below is an introduction to the Jatu im6: 1. This car is positioned as an MPV. Relatively speaking, white and black are more in line with the positioning of this car. The black body color highlights the car's grandeur, while the white body makes it look more fashionable. White and black also align with modern consumers' aesthetic views on cars. 2. The color of a car affects its safety and resale value. White paint has higher visibility, especially during nighttime driving, making white cars more noticeable to other vehicles. Therefore, white paint can enhance driving safety to some extent.
7
4
Share

How often should a minivan be inspected after six years?

Minivans should be inspected every six months after six years. The annual inspection schedule for vehicles is divided into the following scenarios (motor vehicles should be inspected from the date of registration): (1) Commercial passenger vehicles should be inspected once a year within the first 5 years; after 5 years, every 6 months; (2) Trucks and large or medium-sized non-commercial passenger vehicles should be inspected once a year within the first 10 years; after 10 years, every 6 months; (3) Small and mini non-commercial passenger vehicles can be exempt from inspection twice within the first 6 years (an annual inspection mark must be obtained every two years); after 6 years, once a year; after 15 years, every 6 months.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.