How to Connect Mobile Phone Bluetooth to a Mercedes-Benz Car?

What is Tire Cupping?

"Tire cupping" refers to the abnormal accelerated wear on the inner or outer side of one or several tires, where a specific part of a tire wears out much faster compared to the others. During tire inspection, it is evident that the tread pattern wears out more quickly on one tire or one side of the same tire, leading to uneven wear and premature tire failure. Below are methods to avoid tire cupping: 1. Adjust Tire Pressure: Both overinflation and underinflation can cause uneven tire wear. When tire pressure is too low, the tire bends inward, leading to severe wear on the edges. Conversely, overinflation causes accelerated wear on the central part of the tire tread. 2. Regular Wheel Balancing: Due to manufacturing processes or external factors, the mass distribution of a wheel may become uneven. When the wheels rotate at high speeds, this imbalance can occur. To prevent or correct this, weights are added to the wheel to balance it dynamically, avoiding tire cupping. 3. Regular Four-Wheel Alignment: Four-wheel alignment enhances driving safety, extends tire life, reduces fuel consumption, minimizes tire wear (preventing cupping), and decreases suspension component wear. It is recommended to perform this at least once a year or every 10,000 kilometers. 4. Proper Tire Maintenance and Rotation: Diagonal tire rotation is generally effective, as it helps maintain even wear and prolongs tire life. 5. Check Wheel Hub Bolts for Looseness: Loose wheel hub bearings, improperly tightened leaf spring U-bolts, or suspension looseness can cause the tires to wobble while driving, leading to abnormal wear. During vehicle maintenance, carefully inspect the bolts around the wheels and hubs for any looseness.

12

4

Share

What do various braking systems mean in Subject 4?

There are two types of braking systems in Subject 4, here is more information: Service brake. Commonly known as the foot brake, the service brake is the braking method used during normal driving. It primarily converts the mechanical force from the brake pedal into hydraulic pressure, which is then transmitted to the brake system and applied to all four tires of the vehicle to achieve braking. Parking brake. Commonly known as the handbrake, the parking brake is used when the vehicle is stationary to prevent it from rolling. It mainly works by connecting a steel wire cable to the brake shoes to apply braking force, typically acting on the rear wheels of the vehicle.

13

1

Share

What is the ground clearance of the BJ80?

The ground clearance of the BJ80 is 250 millimeters, which allows this vehicle to handle most complex road conditions. The BJ80 is a rugged off-road vehicle, equipped with a 2.3-liter turbocharged engine across all variants. This engine delivers a maximum power of 170 kilowatts and a peak torque of 345 Newton-meters. The 2.3-liter turbocharged engine features multi-point fuel injection technology and utilizes an aluminum cylinder head with a cast iron cylinder block. The BJ80 is classified as a mid-to-large-sized hardcore SUV, with body dimensions of 4765mm in length, 1955mm in width, and 1985mm in height, paired with an automatic manual transmission.

15

0

Share

What is the actual measured ground clearance of the T-Roc?

The actual measured ground clearance of the T-Roc is 152mm. A larger minimum ground clearance enhances the vehicle's ability to pass over obstacles or uneven terrain, but raises the center of gravity, reducing stability; a smaller minimum ground clearance diminishes the vehicle's ability to traverse obstacles or rough ground, but lowers the center of gravity, improving stability. Here are some additional details: 1. Ground clearance refers to the distance between the ground and the bottom rigid part of the vehicle. A vehicle's ground clearance varies depending on whether it is unloaded or loaded. Ground clearance is related to the vehicle's load—the heavier the load, the smaller the ground clearance. 2. Vehicles with smaller ground clearance have a lower center of gravity but poorer off-road capability.

13

0

Share

Does the Jetour X95 have independent suspension?

Yes, the Jetour X95 features independent suspension. The front suspension of the Jetour X95 is a MacPherson strut independent suspension, while the rear suspension is a multi-link independent suspension. The Jetour X95 is an SUV under the Jetour brand, equipped with a 1.6T turbocharged engine delivering a maximum power of 140 kW and a peak torque of 275 Nm. The vehicle's dimensions are 4875 mm in length, 1925 mm in width, and 1745 mm in height, with a wheelbase of 2855 mm. It is paired with an 8-speed automatic transmission. The interior of the Jetour X95 is primarily black, accentuated with high-contrast stitching and numerous matte chrome trim details.

8

2

Share

Is the Motorcycle License Test Easy?

Compared to a car driver's license, the motorcycle license test is relatively simpler. It only requires three test components: theory, field, and on-road driving, with a very high pass rate. The process is also quite fast, taking about a month, though this may vary by location. Subject 1 and Subject 4: The main test content is similar to the Category C license. The test consists of 50 questions to be completed in 30 minutes, with a passing score of 90. Subject 2: Includes slalom, single-plank bridge, and hill start (specific test items may vary by city). Subject 3: Completed together with Subject 2, without separate training or testing. Just follow the examiner's designated route.

17

4

Share

How to Connect Mobile Phone Bluetooth to a Mercedes-Benz Car?

What is Tire Cupping?

What do various braking systems mean in Subject 4?

What is the ground clearance of the BJ80?

What is the actual measured ground clearance of the T-Roc?

Does the Jetour X95 have independent suspension?

Is the Motorcycle License Test Easy?

Can 95 Octane Gasoline Be Added to a 92 Octane Fuel Tank?

What to Do When a Car Completely Loses Power and Won't Start?

How high is the fuel consumption of the Hongqi H5?

Where is the engine number located on the Bora?