How to Connect Mobile Phone Bluetooth to a Car?

What is the normal tire pressure for the Baojun 560?

The normal tire pressure range for the Baojun 560 is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. The tire pressure monitoring data for the Baojun 560 is displayed on the dashboard's LCD screen. The driver can switch to the tire pressure monitoring system display page by rotating the knob on the dashboard left or right, which will show the air pressure of each tire. The Baojun 560 is equipped with a tire pressure monitoring system that automatically monitors the tire pressure in real-time while driving and alerts the driver in case of tire leaks or low pressure to ensure driving safety. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure. The system usually alerts when the pressure is below 1.8 bar or above 3.0 bar. In this case, the tires need to be checked and the pressure adjusted. The tire pressure monitoring system has not been reset. After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the tire pressure monitoring indicator light to come on. Simply reset the tire pressure to resolve this issue. The tire pressure sensor is damaged. The tire pressure sensor, which is installed inside the tire and connected to the tire inflation valve, monitors the tire pressure. If the sensor is damaged while driving, the tire pressure fault light will also come on. For sensor damage issues, the only solution is to replace it with a new part.

12

4

Share

What is the National Standard IV for Vehicle Emissions?

Automotive National Standard IV refers to China IV emission standards, fully known as the National Fourth Stage Motor Vehicle Pollutant Emission Standards. The main pollutants from vehicle emissions include hydrocarbons, nitrogen oxides, carbon monoxide, and particulate matter. These pollutants are filtered through the active layer of catalytic converters, secondary air injection, and exhaust gas recirculation systems equipped with cooling devices to control and reduce vehicle emissions below specified limits. Implementing vehicle exhaust emission standards can effectively control the release of pollutants, reduce air pollution, protect the natural environment, and minimize health hazards.

2

0

Share

When to Change Winter Engine Oil for Cars?

Winter engine oil for cars should be changed before the winter solstice. Engine oils are categorized into full synthetic, semi-synthetic, and mineral oils. The functions of engine oil include: 1. Lubrication: Reducing friction and wear between moving parts; 2. Cooling: Absorbing heat generated in the engine combustion chamber and piston tops to cool the engine; 3. Sealing: Filling the gaps between piston rings and cylinder liners to prevent combustion pressure leakage; 4. Cleaning: Preventing pollutants and oxide impurities from sticking to the engine interior during combustion, maintaining cleanliness; 5. Rust prevention: Neutralizing acidic substances produced by combustion gases to prevent engine rust and corrosion.

19

5

Share

What is the function of balance weights?

Balance weights serve the following purposes: 1. Maintain dynamic balance of wheels during high-speed rotation; 2. Extend tire service life and ensure normal vehicle performance; 3. Reduce wear on vehicle suspension systems; 4. Minimize component wear caused by wheel imbalance during driving. Balance weights, also known as tire balance weights, are counterweight components installed on wheels. They reduce vibration amplitude during high-speed rotation by minimizing mass differences between tires. The installation method of balance weights depends on wheel hub material: 1. For steel hubs, simply hammer the weights directly onto the rim; 2. For aluminum alloy hubs, double-sided adhesive tape is required for attachment.

10

5

Share

Which brand does victra belong to?

victra is a tire brand under Maxxis, known for its wear resistance. Tires are circular elastic rubber products assembled on various vehicles or machinery, mounted on metal rims to support the vehicle body, cushion external impacts, ensure contact with the road surface, and maintain driving performance. Tires feature high load-bearing capacity, traction performance, cushioning performance, high wear resistance, and flex resistance. Methods for tire maintenance: 1. Check tire pressure monthly; 2. Always pay attention to tire wear indicators; 3. Be mindful of the tire's expiration date; 4. Rotate tires regularly; 5. Avoid speeding.

15

3

Share

How to deal with the OBD warning light in a car?

The method to deal with the OBD warning light in a car is: enter the electronic control unit to read the fault code, determine the nature and location of the fault, and then proceed with analysis and repair. The OBD warning light in a car refers to the engine fault light, which monitors multiple systems and components, including the engine, catalytic converter, particulate trap, oxygen sensor, emission control system, fuel system, and EGR. The reasons for the OBD warning light to illuminate are: 1. Oxygen sensor malfunction; 2. Three-way catalytic converter leakage, blockage, or damage; 3. Faults in the emission control system, fuel system, or EGR.

10

5

Share

How to Connect Mobile Phone Bluetooth to a Car?

What is the normal tire pressure for the Baojun 560?

What is the National Standard IV for Vehicle Emissions?

When to Change Winter Engine Oil for Cars?

What is the function of balance weights?

Which brand does victra belong to?

How to deal with the OBD warning light in a car?

What to Do When the Mechanical Lock Can't Open the Car Door?

What does the yellow exclamation mark on the Accord dashboard mean?

What Causes the Abnormal Noise When the Car Turns?

How long is the interval between automatic transmission subject one and subject two?