How to Close the Windows with the Remote Control on the Great Wall Poer?

What Causes the Shock Absorber Spring to Make Noise When Turning the Steering Wheel in Place?

The noise when turning the steering wheel in place is likely caused by the friction between the horn wire transmission spring steel piece and the steering wheel. Typically, the sound originates from inside the vehicle and resembles a rustling metal friction noise. The solution is to apply some lubricating oil at the friction point between the spring steel piece and the steering wheel. Relevant information about the car steering wheel is as follows: 1. Function: Its function is to convert the force applied by the driver to the edge of the steering wheel into torque and then transmit it to the steering shaft. 2. Correct Grip: If the steering wheel is viewed as a clock face, the correct hand position is to place the left hand between the 9 and 10 o'clock positions and the right hand between the 3 and 4 o'clock positions. In the event of a collision, this posture is more conducive to supporting the body.

11

2

Share

Which intersections have red light cameras?

Generally, key intersections are equipped with red light cameras. If there are cameras installed, any vehicle running a red light, whether turning left or going straight, will be photographed and considered a traffic violation. According to the "Road Traffic Safety Law," vehicles must obey traffic signals, including traffic lights, signs, road markings, and the directions of traffic police. If both the left-turn and straight signals are green, going straight from a left-turn lane violates lane regulations. When the left-turn signal is red, running the red light will result in penalties. Here are some tips to avoid running a red light: Check arrow signals first, then circular signals: There are two types of traffic signals: arrow signals and circular signals. If arrow signals are present, check them first before looking at the circular signals to avoid running a red light. Note: When encountering a circular red light, right turns are allowed. However, if the right-turn arrow signal is red, right turns are prohibited, and violating this rule will be penalized as running a red light. Brake in time: When the light turns red, ensure the front of your vehicle does not cross the stop line. If the front wheels accidentally cross, but the rear wheels do not, the electronic camera will capture it, and you will be penalized for running the red light. If the front wheels have just crossed the stop line when the light turns red, do not proceed further; wait for the next green light. Check the green light countdown: When the green light starts flashing, if there is a countdown timer, use it to judge whether to proceed. If there is no timer and you are close to the intersection at high speed, you may proceed to avoid braking abruptly and running the red light. If you are far from the intersection and driving slowly, brake immediately to avoid running the red light. Article 38 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" states: When the green light is on, vehicles are allowed to proceed, but turning vehicles must not obstruct straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue. When the red light is on, vehicles are prohibited from proceeding. At intersections without separate signals for non-motorized vehicles or pedestrians, they must follow the motor vehicle signals. When the red light is on, right-turning vehicles may proceed if they do not obstruct other vehicles or pedestrians. Running a red light is not considered illegal under the following circumstances: Yielding to emergency vehicles: Yielding to ambulances, fire trucks, or other emergency vehicles. If caught by surveillance cameras while yielding, manual review will not record the violation. Even if recorded, you can appeal to the traffic police department. Extreme weather: When visibility is so low that even electronic cameras cannot clearly see the traffic lights, photos of violations may be blurry. In such cases, accidental red-light running will not be penalized. Emergencies: When rushing a critically ill patient to the hospital, running multiple red lights may be unavoidable. After delivering the patient, obtain proof from the hospital or the person assisted and verify it with the traffic police to clear the violations. If possible, call an ambulance to avoid accidents caused by running red lights. Traffic police direction: During peak hours, traffic police may direct traffic at key intersections. Drivers must follow the officers' hand signals. The traffic police department clarifies that according to the "Regulations for the Implementation of the Road Traffic Safety Law," vehicles that have crossed the stop line when the yellow light flashes may continue. If you accelerate to cross after the yellow light turns on, it will be considered running a red light if caught by cameras.

8

4

Share

What are the symptoms of overfilling transmission fluid?

Symptoms of overfilling transmission fluid include: 1. More air is drawn into the transmission, causing air blockage at the drain holes on the control valve, leading to poor drainage and gear shifting impact; 2. The fluid level becomes too high, making it easier to come into contact with rotating components during driving. The agitation of the fluid by these components can create bubbles, which, when drawn into the oil pump, result in abnormal oil pressure and reduced lubrication effectiveness; 3. Increased resistance to gear rotation, affecting the transmission's efficiency and reducing its cooling capability. It's essential to add the correct amount of fluid—neither too much nor too little. The fluid level can be checked using the transmission dipstick, with the ideal level being slightly above the middle mark.

18

4

Share

What is the difference between original car glass and replacement glass?

There are differences in the sealing between original car glass and replacement glass. If there are installation issues with a replaced windshield, it may lead to water leakage during later use. In severe cases, driving the vehicle could cause the windshield to detach, resulting in an accident, which is extremely dangerous. Below are specific methods to check whether the glass has been replaced: 1. Check the manufacturer: Examine the manufacturer code on the glass to identify which company produced it. Generally, car manufacturers purchase glass in bulk and do not use too many brands or the same brand from different production locations. 2. Check the production date of the glass: If there is a significant difference in the production dates of the glass pieces on a single vehicle, it may indicate that the car has been refurbished or the glass has been replaced later. 3. Check the glass label: If the car glass has been replaced, the new glass label will differ significantly from the original factory label.

10

0

Share

How to reset the tire pressure on the Buick Regal?

Method to reset the tire pressure on the Buick Regal: Press and hold the odoTrip button, toggle the mileage display on the combination instrument until only the total mileage is displayed, then press and hold the odoTrip button again. After a few seconds, the low tire pressure indicator will start flashing. When two beeps are heard, it indicates the reset is complete. The Buick Regal is a mid-to-high-end sedan under the Buick brand, positioned between the Excelle and LaCrosse. It is highly favored by users for its trendy, dynamic, and tech-savvy product image and comprehensive technical capabilities. In terms of body dimensions, the Buick Regal measures 4843mm in length, 1856mm in width, and 1484mm in height.

15

0

Share

What happens if there is too much engine oil?

Excessive engine oil can negatively impact the engine. In severe cases, it may damage the three-way catalytic converter, cause engine oil leaks, reduce engine power, create unnecessary resistance to crankshaft rotation, and consequently affect power output while increasing fuel consumption. When there is too much oil in the engine, the movement of the crankshaft and connecting rod ends will violently agitate the oil during operation. This not only increases the rotational resistance of the crankshaft and internal power loss but also leads to more oil splashing onto the cylinder walls, easily resulting in oil burning and discharge. When adding oil, there is a marked scale—generally, keeping the oil level between the minimum and maximum marks on the dipstick is sufficient.

3

Share

How to Close the Windows with the Remote Control on the Great Wall Poer?

What Causes the Shock Absorber Spring to Make Noise When Turning the Steering Wheel in Place?

Which intersections have red light cameras?

What are the symptoms of overfilling transmission fluid?

What is the difference between original car glass and replacement glass?

How to reset the tire pressure on the Buick Regal?

What happens if there is too much engine oil?

How to Open the Magotan's Key?

Should the Original Car Mats Be Retained?

Can the original 17-inch wheels be replaced with 18-inch ones?

Where is the air conditioning filter element located in the Tharu?