How to Clear the Maintenance Reminder on Volkswagen Magotan?

[AuroraRose]

Method to clear the maintenance reminder on Volkswagen Magotan: First, press the small wrench button on the dashboard with your left hand, then turn on the ignition with your right hand. Next, release the small wrench button with your left hand and press the minute adjustment button on the time setting. Turn off the ignition, remove your left hand from the time button, and start the engine. The maintenance reminder will then disappear. The Volkswagen Magotan is a B-segment sedan produced and sold by FAW-Volkswagen, with a body length, width, and height of 4866mm, 1832mm, and 1464mm respectively. In terms of active safety, the Volkswagen Magotan is equipped with a high-level ESP electronic stability program, which effectively prevents skidding when avoiding obstacles at high speeds, maximizing the safety of both the driver and the vehicle.

[NadiaLee]

I recently purchased a Volkswagen Magotan and successfully cleared the maintenance reminder light myself. The key is to ensure the vehicle is completely turned off with the key in the OFF position. Then, press and hold the 0.0/SET button on the instrument panel while turning the key to the ON position (without starting the engine). The dashboard will display 'RESET SERVICE' and flash for a few seconds - release the button, and the warning light will disappear. This method works for most Magotan model years, and the system will recalculate the next service interval after resetting. I recommend checking the owner's manual before first attempt, as some configurations may differ slightly (e.g., models with multifunction steering wheels require button combinations to access settings). After completion, start the car to confirm the light is off. Never perform this operation while driving to avoid distraction - safety first. DIY approach saves trips to the repair shop and helps familiarize yourself with vehicle functions.

[AllieAnn]

To clear the maintenance reminder on a Volkswagen Magotan, follow these clear steps based on my experience: First, ensure the car is turned off with the key in the OFF position. Then, press and hold the reset button on the right side of the dashboard, usually a small button marked '0.0', without releasing it. While holding the button, turn the key to the ON position without starting the engine. The screen will display a prompt such as 'SERVICE RESET'. Maintain this for a few seconds before releasing the button to complete the process. If the manual method doesn’t work, it might indicate the system requires a deeper reset, in which case you’ll need an OBD diagnostic tool connected to the vehicle’s computer to adjust the maintenance data from the central module. Having done this multiple times myself, I’ve found that ensuring the correct button sequence is crucial—otherwise, the system won’t respond. After completing the reset, make sure to perform the necessary maintenance promptly and don’t ignore the reminder, as neglecting it could harm the engine. The entire process takes about a minute and is both practical and cost-saving.

[Dawson]

I've been driving a Magotan for years and always clear the service reminder light after maintenance. The steps are simple: Turn off the engine, hold down the 0.0 button on the instrument panel, turn the key to ON position without starting the engine, and release when the reset message appears. The light will go off when completed. If there's no response, check the settings menu or use a diagnostic tool. Remember not to perform this operation while driving for safety.