How to Clear the Maintenance Reminder for Magotan?
3 Answers
To clear the maintenance reminder for Magotan, follow these steps: 1. Turn off the ignition switch; 2. Press and hold the 0.0 button on the dashboard; 3. Turn on the ignition switch while keeping the 0.0 button pressed; 4. Release the 0.0 button when the dashboard display shows 'Confirm to reset maintenance service data'; 5. Press the 0.0 button once again to confirm. Taking the 2020 Magotan as an example, it is a mid-size sedan with body dimensions of 4865mm in length, 1832mm in width, 1471mm in height, and a wheelbase of 2871mm. The 2020 Magotan is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, a maximum torque of 250Nm, and is paired with a 7-speed dual-clutch transmission.
I've encountered this issue too, and clearing the maintenance reminder for the Magotan is actually quite simple. Turn off the engine and rotate the key to the OFF position without starting the car. Locate the reset button on the dashboard, usually marked with 0.0 or SET, and press and hold it with your thumb. Then slowly turn the key to the ON position without starting the engine, wait for 5 to 10 seconds, and you'll see the maintenance reminder light turn off or the numbers reset. After that, release the button. I've tried this method several times with my Magotan, and it worked every time—it's essentially resetting the system counter. Note that the button location may vary slightly depending on the model year, so it's advisable to check the owner's manual for confirmation. Never attempt this while driving; safety first. After clearing the reminder, make sure to schedule maintenance promptly, as this warning protects your car's engine and oil health. Delaying it too long could damage engine components.
As a car enthusiast, I find the steps to reset the maintenance reminder on the Magotan quite straightforward. First, turn off the engine and rotate the key to the OFF position. On the dashboard near the steering wheel, press and hold the reset button (usually marked with 0.0). Then, turn the key to the ON position without starting the engine by pressing the accelerator, and wait for the reminder to disappear before releasing the button. Volkswagen's design is thoughtful, as this prevents accidental operations. If it doesn’t work, it might be due to a faulty button or system issue, in which case you’ll need a diagnostic tool to read the fault codes. I recommend checking the manual regularly to avoid missing any details. After resetting, don’t delay the maintenance to ensure your Magotan runs long and fuel-efficiently.
