How to Clean Engine Oil Stains Penetrated into Cement Floor?

1 Answers
VanAnderson
07/30/25 1:06am
Alcohol can dissolve in both organic solvents and water. The higher the alcohol concentration, the better, with anhydrous alcohol being the best option. Alcohol is available at pharmacies or chemical stores. Apply a small amount of essential balm on the clothing area stained with engine oil, and wash it together with the laundry. It's simple and effective for thorough cleaning. First, use gasoline to wipe the stain. For heavier oil stains, you can use paint thinner and turpentine. Once the oil stain dissolves, proceed with regular washing methods to clean it thoroughly. Use a soft cloth or cotton yarn dipped in gasoline to wipe the stain. The oil-based colored substances will dissolve in the gasoline and transfer to the cleaning cloth.
Was this review help?
10
0
Share
More Forum Discussions

How to Extract Gasoline from a Car?

To extract gasoline from a car, follow these steps: 1. Open the engine compartment hood and locate the fuel line connecting the engine to the fuel tank; 2. Open the vehicle's relay box, identify the fuel pump relay, remove it, and use a wire to bridge terminals 85 and 86 on the relay socket; 3. Insert the car key and turn it to the ON position; 4. Once the desired amount of fuel has been extracted, turn off the ignition and remove the bridging wire. Gasoline is a volatile and flammable hydrocarbon mixture liquid obtained through distillation, cracking, or pyrolysis of petroleum, and is used as fuel.
20
3
Share

How to use the cigarette lighter in the Passat?

The usage of the cigarette lighter in the Passat is as follows: 1. The cigarette lighter socket is located next to the center console cup holder, marked with a cigarette-shaped icon. Press the icon button to automatically heat it, and it will pop out when heating is complete; 2. Use the other side to light a cigarette by gently touching the cigarette to the heated part; 3. The cigarette lighter is safer than a lighter, so it is recommended to use the cigarette lighter when smoking while driving. The Passat is a mid-size sedan designed by Volkswagen in Germany, with a body length of 4933 mm, width of 1836 mm, and height of 1469 mm. In terms of appearance, the Passat adopts Volkswagen's new design concept, featuring a light-rhyme front face design with flowing chrome trim, an evolved version of Volkswagen's signature grille, a dot-matrix horizontal integrated grille, dual-L revolving full LED lens headlights, and a more robust engine hood, all of which together form the new front face.
15
5
Share

What is the meaning of the Mazda logo?

The meaning of the Mazda logo symbolizes the company's aspiration to soar high with infinite creativity and sincere service, advancing into the new century. Mazda is a mid-size sedan. Taking the Mazda 3 as an example, its body dimensions are 4515mm in length, 1745mm in width, and 1465mm in height. In terms of power, the Mazda 3 offers two naturally aspirated engines: a 1.6L and a 2.0L. The 1.6L engine has a maximum power output of 79kW, paired with either a 5-speed manual or 4-speed automatic transmission. The 2.0L engine delivers a maximum power of 110kW, matched with either a 6-speed manual or 5-speed automatic transmission.
11
2
Share

How to Adjust the Rearview Mirror on a Passat?

To adjust the rearview mirror on a Passat, follow these steps: 1. Turn the knob to L to adjust the angle of the left rearview mirror; 2. Turn the knob to R to adjust the angle of the right rearview mirror; 3. Turn the knob to 0 to adjust the angle of the left rearview mirror; 4. Press the up, down, left, and right buttons to adjust the rearview mirror's movement in the respective directions. The Passat is a mid-size sedan designed by Volkswagen in Germany, with a body length of 4933 mm, width of 1836 mm, and height of 1469 mm. In terms of exterior design, the Passat incorporates Volkswagen's new design philosophy, featuring a light-rhyme front face design with flowing chrome trim, an evolved version of Volkswagen's signature grille, a dot-matrix horizontal integrated grille, dual-L rotary full LED lens headlights, and a more robust engine hood, all contributing to the brand-new front appearance.
2
5
Share

How to Use a Multimeter to Detect Vehicle Electrical Leakage?

Using a multimeter to detect vehicle electrical leakage involves the following steps: 1. Open the front hood, secure the hood lock, and close all doors; 2. Adjust the multimeter to the DC Ampere 20A setting; 3. Remove the red probe of the multimeter and insert it into the 20A socket; 4. Disconnect the negative terminal of the battery, connect the red probe to the negative battery cable, and the black probe to the negative battery post; 5. Press the remote lock button to lock the vehicle and observe the current displayed on the multimeter. A multimeter, also known as a volt-ohm-milliammeter (VOM), is an essential measuring instrument in power electronics and other fields, primarily used for measuring voltage, current, and resistance. Multimeters are categorized into analog and digital types based on their display method.
5
4
Share

Should the Anti-Skid System Be Kept On During Normal Driving?

During normal driving, the anti-skid system should be kept on to prevent vehicle skidding and ensure driving safety when the vehicle encounters skidding risks. Different brands have various names for the anti-skid function, such as ESP, Electronic Stability Program, Traction Control System, and Vehicle Dynamic Control System, all of which include anti-skid features. During normal driving, the Electronic Stability Program automatically activates and does not require manual operation. Currently, the most advanced form of the anti-skid system is ESP, commonly referred to as the Electronic Stability Program. Its function involves collecting and processing data such as the adhesion force of each wheel, lateral acceleration, and steering status through sensors to correct the driving direction and control speed.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.