How to Choose Car Window Tint?

Why does the Bora's water temperature light stay on when the temperature isn't high?

There are many common reasons for high water temperature, such as: fan belt breakage, radiator or hose leakage, thermostat failure, oil leakage, etc. Water temperature gauge range: The water temperature gauge ranges from 0-130 degrees, with the normal temperature being the central 90 degrees. When the water temperature stabilizes at 90 degrees, it indicates that the engine's working temperature has stabilized and reached its optimal operating condition. Overheating: When the car's water temperature is too high, the owner should stop the car and wait for the water temperature to drop to normal before continuing to drive. Reading the water temperature gauge: The 'C' on the car's water temperature gauge represents 60 degrees, and the 'H' red mark represents 110 degrees. The span from 60-110 degrees allows for an estimation of the approximate temperature indicated by the water temperature gauge.

17

4

Share

Where is the heater in the Haval Chitu Golden Rabbit?

Haval Chitu Golden Rabbit's heater is located on the car's control panel. Function of the AC button: The AC button is the switch for the air conditioning compressor. In summer when using air conditioning, you must turn on the AC button to activate the cold air. However, the heater only utilizes the internal heat circulation of the car and does not require the air conditioning compressor to be activated. Therefore, to use the heater, you only need to adjust the air conditioning buttons without turning on the AC switch. Heater: The heater comes from the heat generated by the engine during operation: when the engine's cooling system dissipates heat from the engine, a fan directs this heat into the car to form warm air. When the heater is not in use, the fan stops, the heating vents close, and the dissipated heat is completely released into the atmosphere.

6

0

Share

What is the cause of the Volkswagen U010000 fault code?

Fault code U010000 indicates a loss of communication with the Engine Control Module (ECM)/Powertrain Control Module (PCM) A. Network fault: This is a fault in the multiplex communication system (i.e., a network fault). In this case, it is necessary to measure the wiring harness of the multiplex communication system according to the circuit diagram to check for any short circuits to the vehicle body ground or to the positive terminal. Measure whether the resistance value is within the standard range, and then also measure whether the terminal resistance value is normal. Functions of the automotive electronic control unit: The automotive electronic control unit is the core component of the electronic control system, receiving input signals from sensors or other devices and processing the input signals into signals that the computer can accept.

3

4

Share

How is the Audi A4L engine model CUJ?

Audi A4L 2019 40TFSI Sport model uses a 2.0T engine with the code name EA888. This engine can produce 190 horsepower and 320N.m torque, and technically, Audi's EA888 is more advanced. Introduction to engine models: The engine model is the manufacturer's labeling of relevant engine information according to regulations or industry practices. This includes the engine's production company, specifications, performance, features, technology, purpose, and product batch. Engines installed in cars or multi-purpose passenger vehicles are required to display the professional manufacturer, model, and production number. Ways to check the engine: You can check on the vehicle's driving license, motor vehicle registration certificate, purchase invoice, factory certificate of compliance, operating license for commercial vehicles, vehicle purchase tax payment certificate, public security registration records, vehicle insurance card, or the actual engine (usually on the engine nameplate).

1

2

Share

Why does the Teana not start and the brake pedal feels hard?

The Teana fails to start and the brake pedal feels hard because the vacuum booster pump is required to assist when pressing the brake. If the vacuum booster pump lacks assistance, the brake will have no power assist, making it difficult to press down. For the vacuum booster pump to generate assistance, the car's engine must be running so that the pump can create a vacuum. Engine carbon buildup: This failure to start is mainly caused by excessive carbon buildup in the idle speed motor, intake tract, intake valves, and combustion chamber. Excessive carbon deposits and dirt in the intake tract alter the cross-sectional area of the air passage, leading to an overly rich or lean air-fuel mixture. This results in abnormal combustion, engine shaking after starting, or even a complete failure to start. Fuel injector leakage: The Zotye T600's failure to start may also be due to issues with the fuel injectors, such as leakage or excessive carbon buildup, causing a lean air-fuel mixture during startup and making it difficult to start. Additionally, when the carbon canister or carbon canister solenoid valve malfunctions, it can also lead to difficulty in starting.

19

0

Share

What Causes the Friction Sound When Turning the Mercedes Steering Wheel?

Small car steering wheel turning with abnormal noise may be due to steering wheel issues or stabilizer bar problems. Steering wheel issues: If the abnormal noise comes from inside the steering wheel, the problem is most likely caused by the clock spring inside the steering wheel. Remove the steering wheel clock spring and apply some grease to see if the noise persists. If it still makes noise, replace the clock spring. Be gentle when removing the steering wheel, or disconnect the airbag fuse to prevent the airbag from deploying. Stabilizer bar problems: If the noise is not coming from the shock absorber, check if the stabilizer bar bushings are loose or damaged. Loose or damaged stabilizer bar bushings will not only cause noise when turning the steering wheel but also when driving on uneven roads. Loose stabilizer bar bushings can be fixed by adding shims, but if they are damaged, they must be replaced.

6

0

Share

How to Choose Car Window Tint?

Why does the Bora's water temperature light stay on when the temperature isn't high?

Where is the heater in the Haval Chitu Golden Rabbit?

What is the cause of the Volkswagen U010000 fault code?

How is the Audi A4L engine model CUJ?

Why does the Teana not start and the brake pedal feels hard?

What Causes the Friction Sound When Turning the Mercedes Steering Wheel?

Does Fast Acceleration at Traffic Lights Count as Speeding?

What Are the Essential Driving Knowledge for Beginners?

What causes the abnormal noise when starting a Mercedes-Benz C260L?

What are the symptoms after changing transmission fluid?