How to Check the Tire Pressure Monitoring on Roewe i6?

1 Answers
Paislee
07/29/25 8:57pm
Roewe i6's tire pressure monitoring can be viewed on the dashboard. In case of a malfunction, it will automatically alert with a flashing warning light accompanied by a beeping sound. Function of tire pressure monitoring: The tire pressure monitoring system is a type of active safety equipment that can promptly alert when there are signs of danger in the tires, helping to prevent serious accidents. The tire pressure monitoring system also ensures that the tires always operate within the specified pressure and temperature range, thereby reducing tire damage and extending tire lifespan. The dimensions of the Roewe i6 are 4671mm in length, 1835mm in width, and 1464mm in height, with a wheelbase of 2715mm.
Was this review help?
9
1
Share
More Forum Discussions

What is the reason why the Jaguar XEL sunroof cannot be closed with one touch?

The reasons why the Jaguar XEL sunroof cannot be closed with one touch are: 1. Lack of lubrication in the sunroof track, causing the sunroof seal to stick to the body; 2. Foreign objects in the sunroof slot; 3. Damage to the sunroof motor. The functions of the sunroof are: 1. Releasing toxic gases inside the vehicle; 2. Preventing car exhaust fumes; 3. Reducing the interior temperature; 4. Effectively reducing wind noise; 5. Eliminating fog. Taking the 2020 Jaguar XEL as an example, it belongs to the mid-size car category, with body dimensions of: length 4778mm, width 1850mm, height 1429mm, a wheelbase of 2935mm, a fuel tank capacity of 62 liters, and a curb weight of 1730kg.
10
5
Share

What are the differences between the Lynk & Co 02 Yao Edition and Jin Edition?

The differences between the Lynk & Co 02 Yao Edition and Jin Edition lie in the seat materials: the Yao Edition features genuine leather seats, while the Jin Edition combines genuine leather with suede material. Both the Yao Edition and Jin Edition share the same 5-door, 5-seat SUV body structure, with identical dimensions: length 4448mm, width 1890mm, height 1528mm, and a wheelbase of 2702mm. Both models are equipped with MacPherson independent front suspension and multi-link independent rear suspension. They are powered by a 1.5L turbocharged engine, delivering a maximum horsepower of 180PS, maximum power of 132kW, and maximum torque of 265Nm.
5
3
Share

How to Avoid Shifting from Third Gear to First Gear by Mistake

Before shifting gears, first return the gear lever to neutral, then engage the corresponding gear. Here are some additional tips: 1. When parking normally with an automatic transmission, shift into P (Park). Most automatic transmissions follow the gear sequence "P, R, N, D". You should first shift from P to N (Neutral), then start the engine, release the handbrake, shift into D (Drive), and press the accelerator to drive forward normally. 2. If you start the engine directly and then shift from P through multiple gears to D in one motion, it will frequently cause impact damage to transmission components.
15
1
Share

Do I Need to Press the Clutch When Shifting to Neutral to Park?

Shifting to neutral for parking does not require pressing the clutch. While driving, you can shift directly to neutral from any gear without pressing the clutch. In fact, this already achieves complete gear disengagement. Here is some additional information: 1. The clutch is used during the moment of engagement or in semi-engaged conditions. Prolonged pressing of the clutch can cause wear, so coasting in neutral involves pressing the clutch, shifting to neutral, releasing the clutch, and then coasting. However, modern vehicles with electronic fuel injection generally do not recommend coasting in neutral as it consumes more fuel. 2. The method to shift to neutral without pressing the clutch is to release the throttle. Gently push the gear lever—just a light touch with two fingers is usually enough to shift into neutral, but avoid using excessive force.
9
1
Share

Is it necessary to replace the coolant?

Coolant replacement is necessary. The steps for replacing coolant are: 1. Open the vehicle's engine hood, and the coolant reservoir can be seen in the upper right corner; 2. Open the coolant drain plug under the radiator to drain the old coolant; 3. Add new coolant, tighten the cap, and the coolant replacement is complete. The functions of coolant are: 1. To provide anti-corrosion protection for the engine's cooling system; 2. To prevent water from boiling when the engine temperature reaches 100 degrees Celsius; 3. To prevent the formation of scale, thereby avoiding a reduction in the radiator's cooling efficiency; 4. To ensure the engine operates normally under low-temperature conditions.
20
3
Share

What does the AUTO display on the air conditioner mean?

AUTO display on the air conditioner refers to the automatic mode, which automatically adjusts the temperature and wind speed of the air outlet to regulate the temperature inside the car. The functions of the air conditioner include: 1. Achieving a cooling effect through the continuous cycle of refrigerant; 2. Removing dust, odors, smoke, and toxic gases from the air inside the car, making the air fresher, and humidifying the air inside the car to increase the relative humidity; 3. Using engine coolant, waste heat, or heat generated by a burner as a heat source for heating, which is then blown into the car by a blower to raise the temperature of the air outlet for heating purposes; 4. Drawing in fresh air from outside for ventilation and air exchange, which also helps prevent window fogging.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.