···
Log in / Register

How to Check the Production Date of Yokohama Tires?

6Answers
LaAnderson
07/25/2025, 12:46:11 AM

The production date of Yokohama tires can be found on the outer side of the tire. First, locate the three letters DOT, followed by four numbers which indicate the production date. Typically, it consists of a four-digit number "AABB," where the first two digits "AA" represent the week of the year the tire was produced, and the last two digits "BB" represent the year. Here is some information about Yokohama tires: Yokohama Tires is a world-renowned premium tire brand. Over 90 years, Yokohama Tires has honed its technology and accumulated experience, establishing itself as a solid position as a comprehensive rubber manufacturer.

Was this review help?
118
Share
DiGabriel
08/11/2025, 08:27:20 AM

I remember chatting in the car club about how checking the production date of Yokohama tires is actually quite simple. You can squat down and look at the sidewall of the tire, searching for a code starting with DOT. The last four digits indicate the production date—for example, ‘1224’ means the tire was produced in the 12th week of 2024. The first two digits represent the week (1 to 52), and the last two digits are the last two digits of the year. This date is crucial because tires older than six years are prone to aging and cracking, which can reduce wet traction or even cause blowouts. So, it’s advisable to check this when buying a car or before replacing tires. If the numbers are hard to read, wiping the area with a damp cloth can make them clearer. In short, making it a habit to check regularly can save you hassle and money, avoiding potential road hazards. I’ve done this myself—discovering and replacing old tires in time made me feel much safer.

Was this review help?
5
Share
Expand All
TheoMarie
09/27/2025, 12:10:04 AM

As a driver who often takes family road trips, I always pay attention to tire maintenance. The method to check the production date of Yokohama tires is to look for the DOT marking on the sidewall of the tire. The last four digits following it indicate the date, for example, '1023' means the 10th week of 2023. The first two digits represent the week number, ranging from 1 to 52, and the last two digits correspond to the year, like 23 for 2023. This date helps you determine the age of the tire and avoid using aged ones, as it's generally best to use tires within three to five years. When checking, don’t forget other information such as the size code, but the date is the key. It’s best to check during annual maintenance or when washing the car. This ensures smooth driving, reduces the risk of hydroplaning at high speeds, and is extremely helpful for family safety.

Was this review help?
17
Share
Expand All
LeLeila
11/10/2025, 01:09:40 AM

When I first started learning to drive, I was quite confused about these details. The production date of Yokohama tires is indicated by the last four digits of the DOT code on the sidewall. For example, the numbers '0724' represent the 7th week of 2024. The location isn't hard to find—just squat down and feel the tire sidewall to see the imprint. It's convenient to check and can be done in just a few minutes during regular parking. Knowing the date helps estimate the tire's lifespan, and it's advisable not to keep new tires in storage for too long. Older tires tend to harden and crack easily, affecting braking performance on wet or slippery roads. In short, this simple action can prevent major issues, and I recommend all new car owners learn this little trick.

Was this review help?
1
Share
Expand All
SanCorbin
12/31/2025, 02:56:34 AM

I'm in the habit of washing my car every quarter and checking the tire condition while at it. The production date of Yokohama tires is indicated by the last four digits of the DOT code on the tire sidewall, such as '4318', which means the tire was produced in the 43rd week of 2018. The first two digits represent the week, and the last two the year—make sure to read this range correctly. Paying attention to this during maintenance is crucial, as tires typically last about 5 years. Expired tires can lead to increased noise or deformation. When rotating tires, it's also advisable to check the dates and maintain proper tire pressure. From a safety perspective, older tires are more prone to bursting when encountering potholes, so developing a simple inspection routine can save you from costly repairs.

Was this review help?
11
Share
Expand All
DelClara
03/28/2026, 04:36:32 AM

Having driven for half my life, I believe tire age is crucial. The production date of Yokohama tires is indicated by the last four digits of the DOT code on the sidewall, for example, '1920' means the 19th week of 2020. The week number ranges from 1 to 52, and the year is represented by the last two digits, prominently placed for easy identification. Signs of tire aging, such as cracks or hardening, stem from a long production date, so it's essential to check the date carefully when buying a car or used tires. Expired tires not only reduce comfort but may also cause skidding accidents. It's advisable to take a photo of the date with your phone for record-keeping and regularly cross-check it. This practice can extend driving longevity and ensure safe journeys.

Was this review help?
8
Share
Expand All
More Q&A

Why does the car door lock keep popping open automatically?

If the automatic door lock keeps jumping during driving, it indicates that the automatic door power ground or the brake light power line is damaged. Here is some related information about car door locks: 1. Maintenance tips: If you find the key difficult to use or it feels stiff, you can spray some lubricating oil, except for the tumbler lock core. Avoid exposing the car door lock to rainwater, as it can easily cause the small springs inside to rust, making the lock less flexible. It is best to keep the car key separate from other keys to prevent excessive weight from wearing out the lock core. 2. Technical requirements: When manufacturing car door locks, they should be produced according to the approved product drawings and relevant technical documents, and the manufactured locks must meet standard requirements without any issues during use. Car door locks must not only be designed and manufactured according to specified standards but also installed and used in compliance with these standards to ensure safe operation and unlocking.
120
Share

Is High Fuel Consumption Normal for a New Motorcycle?

Here are the reasons for high fuel consumption in new motorcycles: Insufficient Tire Pressure: Check if the tire pressure is appropriate. Insufficient tire pressure can make the bike feel underpowered and increase fuel consumption. If the air reservoir cannot store enough compressed air, the brake valve's air supply will be insufficient. Air leaks in the brake valve pipelines or blockages in the air circuit can also lead to insufficient compressed air pressure during braking. Brakes Too Tight: Check if the brakes are too tight. If the free play of the brakes is too small, it can increase driving resistance and fuel consumption. If the brakes are too tight and friction is severe, inspect whether the brake pads are excessively worn, if there are other faults or improper installation, or if there is too much dirt in the brake area. Replace the brake pump if necessary.
114
Share

How Many Kilometers to Change Brake Fluid?

Brake fluid should be replaced every 2 years or 40,000 kilometers. This replacement interval is influenced by usage conditions, as brake fluid has certain corrosive and hygroscopic properties, requiring adjustment of the replacement cycle based on specific circumstances. Relevant information about brake fluid is as follows: Brake fluid is the liquid medium in hydraulic braking systems that transmits braking pressure, used in vehicles equipped with hydraulic braking systems. Brake fluid, also known as brake oil or force oil, is referred to as Brake-Fluid in English. It is an indispensable part of the braking system because liquids cannot be compressed, so the pressure output from the master cylinder is directly transmitted to the wheel cylinders through the brake fluid.
120
Share

How to Reset the Tire Pressure Light on a Porsche Cayenne?

Ensure all tire pressures are normal, turn the ignition to the ON position, press and hold the MENU button on the combination switch, select TypePress - press the Ok button - Setting press the Ok button - select Tyres press the Ok button, choose SpareWhee, press the Ok button, select Sealing set to confirm; start the engine to let it run, at this time the instrument will prompt whether to set the tire pressure value, select the YES option. The tire pressure alarm is a very dangerous signal and requires high attention. Because tires are the primary condition for vehicle safety. Tire pressure monitoring uses the principle of gravity balance. If the tire pressure is balanced, it can display as normal. If a tire is punctured and deflated, causing the balance gravity of the problematic tire to be disrupted, the monitoring system will start to alarm. If the tire pressure monitoring fault keeps alarming: it indicates that the tire pressure is either too high or too low, and the tire pressure needs to be checked. If the tire pressure is too low, it is very likely that the tire is leaking or damaged. When a car is driving at a constant speed on a level road, it must overcome the rolling resistance from the ground and the air resistance, and the tire pressure has a significant impact on the rolling resistance coefficient. When the pressure decreases, the rolling resistance coefficient increases rapidly, because when the tire pressure decreases, the deformation of the rolling tire increases, and the hysteresis loss increases. Therefore, appropriate tire pressure is a guarantee for the car to have good dynamic performance.
107
Share

In which year was the Land Rover Discovery 4 discontinued?

Land Rover Discovery 4 was discontinued in 2016. Introduction to Land Rover Discovery 4: The fourth-generation Land Rover Discovery is a model developed by Land Rover, featuring a body-on-frame construction that categorizes it as a genuine ORV (Off-Road Vehicle) for hardcore off-roading. Its front fascia adopts a hollowed-out design for a more fashionable appearance, with smoother corners compared to the more rigid lines of the Discovery 3. The headlight assembly also incorporates the then-popular LED design. Powertrain of Land Rover Discovery 4: Equipped with a 5.0-liter V8 engine utilizing contemporary direct fuel injection and variable valve timing technologies, it delivers a maximum power output of 276KW (370HP) and an impressive torque of 510NM. The exceptional suspension tuning endows the Discovery 4 with outstanding on-road performance, ensuring effortless stability during high-speed driving and cornering.
117
Share

What causes the CRV key to not turn?

The reason why the Honda CRV car key cannot be turned is that the steering wheel is locked. The steering wheel lock is an effective anti-theft tool for cars, consisting of a lock handle, lock seat, and lock rod. For vehicle safety, when the car is turned off, if the steering wheel is turned left or right or the wheels are not straight when parking, force can cause the steering wheel to turn, triggering the self-locking function. Solution for the key not turning: Most modern vehicles have anti-theft features, and the issue of the car key not turning is quite common. The solution is to turn the key while simultaneously turning the steering wheel to complete the steering wheel unlocking process. If the first attempt to unlock is unsuccessful, repeat the above method 1-2 times to successfully unlock. Solution for push-button start vehicles: If the vehicle is equipped with a push-button start function, the steps are essentially the same as above, except for the step of inserting the key. The solution is to press the brake, turn the steering wheel left and right, and finally press the start button to start the car.
104
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.