How to Check the Car Tire Pressure Monitoring Gauge?
3 Answers
The method to check the car tire pressure monitoring gauge is: long-press the tire pressure monitoring switch inside the glove compartment to view it. The functions of the tire pressure monitoring gauge are: 1. To alert the driver promptly when there are signs of danger in the tires, prompting them to take appropriate measures to avoid serious accidents; 2. To ensure the tires operate within the specified pressure and temperature range, reducing tire damage and extending their lifespan. The usage method of the tire pressure monitoring gauge is: 1. Long-press the set button on the display for about 3 seconds until a beep is heard, and the left front wheel indicator flashes; 2. Bring the display close to the tire pressure sensor, and the display will automatically receive the sensor's ID. After the ID is displayed, click the OK button; 3. Press SET to move to other tires, bring the display close to the other tire pressure sensors one by one, and debug them sequentially.
To check the car's tire pressure monitoring display, I usually glance at the instrument panel right after starting the vehicle. There's typically a tire-shaped icon or TPMS indicator page—for example, you can toggle through displays using the up/down buttons near the steering wheel to view each tire's pressure readings. Remember, checking when the tires are cold gives the most accurate results—meaning after the car has been parked for over three hours or within the first few minutes of driving. If the numbers deviate from the standard values (usually listed on the door frame label), say normally between 2.2 to 2.5 bar, you'll need to inflate if it's too low or release some air if overinflated. Otherwise, uneven wear or blowouts could compromise safety. I make it a habit to check every two weeks, and pairing with a mobile app makes it even easier—many cars sync with smartphones to monitor real-time pressure changes. Never ignore the dashboard warning light; address it immediately to avoid accidents, especially at high speeds.
Checking the tire pressure monitoring system is actually quite simple. In my daily driving routine, after starting the engine, I sit in the driver's seat and glance at the dashboard or center console screen to locate the tire pressure information page. Using the steering wheel controls or touchscreen menu, I navigate a few steps and the system automatically displays the pressure readings for each tire. For accuracy, I prefer checking in the morning or when the vehicle is cold, as hot tires can show inflated pressure readings. I also regularly watch for the tire pressure warning icon on the dashboard—if it stays lit, it indicates an issue like a leaking tire or faulty sensor, requiring manual verification with a tire pressure gauge and adjustments. Regular checks like these help extend tire life, improve fuel efficiency, and ensure smoother driving.
