How to Apply for ETC?

Where to Add Coolant for the Phaeton?

The coolant for the Phaeton is added into the auxiliary tank (also called the expansion tank), which is located in the engine compartment. Method for replacing the coolant: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes, with a special focus on the five-way water pipe. The five-way pipe is named for its five connections to various parts, and the coolant is distributed to different sections of the car after flowing through it. If there are signs of coolant leakage in this area, replace the water pipe or resecure the connections as needed. Drain the old coolant, then flush the liquid channels with clean water. Add clean water to the coolant reservoir and continue filling it until water flows continuously through the engine cooling system. Then, start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water flowing out will have a faint pink tint. Keep adding clean water until clear water flows out. Remember to disconnect the heater hose to drain the water from the heater core. About an hour after draining, add the new coolant through the radiator hose to allow it to flow quickly into the radiator. Then, add another batch of coolant to the reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. As some air is expelled from the cooling system, the coolant level will drop. Top up the coolant to the "MAXT" mark on the reservoir.

14

0

Share

Can Seat Modifications Pass Annual Inspection?

Seat modifications fall under interior modifications and can pass annual inspection. Here is some additional information: 1. Most interior modifications involve upgrading seats to leather or adding decorative elements to the dashboard, which generally do not affect driving safety and thus do not impact annual inspection. 2. Car seats are a prominent part of the interior and serve as components for passenger seating. Typically, seat modifications are based on personal preference or the vehicle's class—higher-end cars often opt for leather seats, while more budget-friendly vehicles tend to choose simpler fabric seats. 3. However, the number and layout of vehicle seats cannot be altered. Even with approval from vehicle management authorities, such changes are not permitted. Unauthorized modifications to the vehicle's internal structure and purpose are considered illegal modifications.

15

1

Share

Which Gear is for Forward Movement in an Automatic Transmission?

Typically, an automatic transmission has six gears: P, R, N, D, S, and L. Among these, D, S, and L gears can be used for forward movement. P stands for Parking, which is used when the vehicle is turned off and parked. Many vehicles require shifting into P gear to power off, remove the key, and lock the doors. Below is an introduction to the gears in an automatic transmission: 1. P gear: Stands for Parking, used when the vehicle is turned off and parked. Many vehicles require shifting into P gear to power off, remove the key, and lock the doors. Once shifted into P gear, the vehicle's transmission is locked. 2. R gear: Stands for Reverse, used for backing up. When shifted into R gear, the vehicle moves backward. 3. N gear: Stands for Neutral, generally used for short stops, such as at traffic lights. It's important to note that if the engine stalls while driving, shifting into N gear is necessary to restart the engine. 4. D gear: Stands for Drive, the most commonly used gear for forward movement. When shifted into D gear and the accelerator is pressed, the vehicle moves forward. 5. S gear: Stands for Sport, often referred to as Sport mode in many models. Shifting into S gear delays upshifts or causes early downshifts, keeping the engine at higher RPMs and increasing torque output for greater power, commonly used for overtaking. This mode increases fuel consumption. 6. L gear: Stands for Low, also known as the hill-climbing gear. It reduces speed and increases torque, commonly used when climbing hills (equivalent to first gear in a manual transmission).

10

4

Share

What is the recommended mileage for the first maintenance of a new car?

It is recommended to perform the first maintenance for a new car at 5,000 kilometers or six months. Below are some considerations for the first maintenance of a new car: 1. Prepare the user manual and vehicle registration certificate for the maintenance. 2. Once the vehicle enters the maintenance workshop, it is best to follow along personally. This allows you to observe the entire maintenance process, especially to monitor the materials used by the maintenance workers and their work attitude. 3. After the normal maintenance is completed, urge the maintenance technician to address any other previously identified issues. Ensure that necessary parts are replaced and not just patched up, as this is within the free warranty period. 4. It is advisable to bring along an experienced driver or at least a relative or friend during the first maintenance for assistance. 5. Before maintenance, organize the items in the car. It is best to keep valuable small items at home or carry them with you, such as mobile phones, laptops, Bluetooth headphones, etc., to prevent loss.

7

2

Share

Can C1 directly apply for A2?

Driver's license C1 cannot directly apply for A1 or A2 models, but can directly apply for upgrading to A3, B1 or B2. To upgrade to A2, the applicant must have held a B1 or B2 license for more than three years with no full-point records in the previous two cycles, or have held an A1 license for more than one year with no full-point records in the previous cycle. According to the new regulations, the A2 (tractor) driver's license cannot be obtained directly, but only through upgrading. C1 driver's license: The C1 driver's license allows driving small and micro passenger cars, light and micro trucks; light, small and micro special operation vehicles. C1 driver's license cannot drive: Large buses, tractors, city buses, medium buses, large trucks, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, trams, etc.

17

2

Share

What is the role of OBD in a vehicle?

OBD in diesel vehicles stands for "On-Board Diagnostics." Below are the functions of OBD: 1. OBD determines specific faults based on specific algorithms. The main purpose of this system is to monitor the engine while driving. Once the exhaust emissions exceed the standard, the malfunction indicator light will illuminate, and fault codes will be stored. 2. If the exhaust emissions exceed the standard, the malfunction indicator light will turn on to alert the owner to perform repairs. Trucks are required to undergo an annual OBD emissions test, and failure to pass will result in not receiving the compliance certification. 3. The useful information obtained from the system's self-diagnosis can assist in vehicle maintenance and repairs. Technicians can use the manufacturer's specialized equipment to read fault codes, enabling quick fault localization for efficient vehicle repairs and reducing the time required for manual diagnostics.

13

5

Share

How to Apply for ETC?

Where to Add Coolant for the Phaeton?

Can Seat Modifications Pass Annual Inspection?

Which Gear is for Forward Movement in an Automatic Transmission?

What is the recommended mileage for the first maintenance of a new car?

Can C1 directly apply for A2?

What is the role of OBD in a vehicle?

What does 2.0TSI mean?

Which country is Chevrolet from?

What is the age limit for obtaining a driver's license in different countries?

What are the differences between the Red Badge Civic and the regular Civic?