How to Apply for a Vehicle Green Book?

What is the difference between 1.5 and 1.6 car engine displacement?

1.5 and 1.6 refer to the engine displacement, which is the difference in the size of the engine displacement. Below is an introduction related to car engine displacement: 1. Displacement is the total working volume of all cylinders in the engine, calculated by multiplying the volume swept by the piston from top dead center to bottom dead center by the number of cylinders. Displacement is a crucial structural parameter that comprehensively measures the size of the engine. The performance indicators of the engine are closely related to its displacement. Generally, the larger the displacement of a car, the higher its power output. Unit displacement is commonly used as a basis for evaluating the size of different engines. 2. According to the standards in mainland China, cars are classified as follows: mini cars (displacement below 1L), compact cars (displacement between 1.0~1.6L), mid-size cars (displacement between 2.5~4.0L), and full-size cars (displacement above 4L). 3. In the past, China was a country dominated by a planned economy, with weak market awareness and low price sensitivity. At that time, cars were sold under a planned distribution model, and the classification of cars was based on engine displacement, dividing them into mini cars, compact cars, mid-size cars, mid-full-size cars, and full-size cars.

4

5

Share

How to fold the mirrors on the Lavida?

The methods to fold the mirrors on the Volkswagen Lavida are as follows: 1. For the base model, manually fold the mirrors by hand. 2. For the top model, press the automatic folding button to retract the mirrors. The rearview mirror is a tool that allows the driver to directly obtain external information about the rear, side, and lower parts of the car while seated in the driver's seat. All countries require that cars must be equipped with rearview mirrors, and all mirrors must be adjustable. The usage methods for the Volkswagen Lavida rearview mirrors are as follows: 1. When parking, starting, overtaking, turning, or making a U-turn—any situation where the driving path is about to change—always give the corresponding driving signal and pay close attention to the rearview mirror to promptly understand the traffic conditions on both sides and behind, preventing unexpected situations from catching you off guard. 2. Before driving, adjust the position and angle of the rearview mirrors. During driving, due to vehicle vibrations, the position and angle of the mirrors may change. Pay attention to this and adjust them promptly. 3. When passing through crowded areas such as markets or intersections, proceed slowly and carefully observe the rearview mirrors. 5. Maintain a necessary safe distance from the vehicle in front and also use the rearview mirror to observe and judge the following distance of the vehicle behind, ensuring you are fully aware when handling situations to avoid rear-end collisions. 6. Before applying predictive braking, observe the rearview mirror to note the position and relative speed of the vehicle behind, then decide on the braking measures to take to prevent rear-end collisions during braking. 7. When passing through intersections, where traffic conflicts are frequent, reduce speed and carefully observe the conditions of pedestrians and vehicles on both sides, ensuring safe passage.

7

3

Share

How to Reset the Tire Pressure on the Trumpchi GS8?

The method to reset the tire pressure on the Trumpchi GS8 is to turn on the ignition switch, press and hold the tire pressure monitoring reset button until you hear a "ding" sound, then release it. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, completing the tire pressure reset. Hazards of Low Tire Pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Causes the steering wheel to become heavy and prone to deviation, among other factors detrimental to driving safety; Increases the movement of various parts of the tire, leading to excessive rolling and abnormal heating of the tire; Reduces the functionality of the cords and rubber, causing delamination or cord breakage, and excessive friction with the rim, leading to damage and abnormal wear at the bead area; Multiplies the friction between the tire and the ground, causing a sharp rise in tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to a tire blowout; Increases tire body deformation, making the tire side prone to cracks, and generates flexing movement, leading to excessive heat, promoting rubber aging, fatigue of the cord layer, cord breakage, and also increases the tire's contact area with the ground, accelerating shoulder wear.

3

0

Share

How many points are deducted for running a red light and then stopping?

When the entire vehicle crosses the stop line, meaning both the front and rear wheels have crossed the stop line but not the opposite stop line, it is referred to as over-the-line stopping. Over-the-line stopping is not considered running a red light, but it still results in penalty points. According to Article 11, Item 7 of the 'Road Traffic Safety Violation Scoring Standards': failing to drive or stop as required at an intersection results in a deduction of 3 points. Running a red light is clearly defined in the 'Road Traffic Safety Law'. Article 26 states that traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light permits passage, and a yellow light serves as a warning. A red light is a traffic signal prohibiting passage, and driving through an intersection when the light is red constitutes the traffic violation of running a red light. Running a red light refers to the act where the vehicle is within the stop line, the signal ahead is already red, but the vehicle continues to move forward until both the front and rear wheels have completely crossed the stop line. This is determined by capturing three photos via electronic cameras: A photo of the vehicle crossing the intersection stop line, showing the red light and license plate number. A photo of the vehicle completely crossing the stop line, showing the red light and license plate number. A photo of the vehicle continuing to move, comparing changes in the vehicle's position, showing the red light and license plate number. Capturing these three photos confirms the act of running a red light. Running a red light is not considered illegal under the following circumstances: Yielding to emergency vehicles: Yielding to ambulances, fire trucks, or other emergency vehicles. If captured by surveillance cameras while yielding, the act of running a red light will not be recorded during manual review. Even if recorded, one can apply for reconsideration at the traffic police department. Extreme weather conditions: When visibility is so low that even electronic police cannot clearly see the traffic lights. The photos capturing the violation may be blurry, and mistakenly running a red light will not result in penalties from the traffic police. Emergency situations: When a citizen transports a critically ill patient, they can present proof from the hospital or the person being assisted to the traffic police for verification. If confirmed, the violation record can be expunged. If possible, it is best to call an ambulance to avoid traffic accidents caused by running a red light. Traffic police direction: During peak hours, traffic police may temporarily direct traffic at important intersections. Drivers should follow the gestures of the traffic police.

20

3

Share

What brand is the Li ONE?

Li ONE is a vehicle under the Li Auto brand, which is a Chinese automotive manufacturer. Li Auto is a Chinese new energy vehicle manufacturer that designs, develops, manufactures, and sells luxury intelligent electric vehicles. In China, Li Auto is a pioneer in successfully commercializing extended-range electric vehicles. The first and only commercialized extended-range electric vehicle model—the Li ONE—is a six-seat mid-to-large luxury electric SUV (Sports Utility Vehicle) equipped with an extended-range system and advanced intelligent vehicle solutions. Mass production began in November 2019, and the 2021 Li ONE was launched on May 25, 2021. As of the end of February 2022, cumulative deliveries of the Li ONE had reached 144,770 units. The Li ONE is an extended-range electric vehicle, a mid-to-large SUV. Its dimensions are 5,030 mm in length, 1,960 mm in width, and 1,760 mm in height, with a wheelbase of 2,935 mm. The Li ONE is powered by a 1.2-liter turbocharged three-cylinder engine with a maximum power output of 96 kW at 5,500 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block, which reduces engine weight, improving vehicle handling and fuel efficiency. The Li ONE is a dual-motor vehicle, with electric motors on both the front and rear axles. The front motor delivers a maximum power of 100 kW and a maximum torque of 240 Nm, while the rear motor produces a maximum power of 145 kW and a maximum torque of 215 Nm. This vehicle uses a ternary lithium-ion battery. Most electric vehicles employ ternary lithium-ion batteries due to their higher energy density and lighter weight. The Li ONE features a MacPherson independent front suspension and a multi-link independent rear suspension.

20

3

Share

Should the ETC card in the car be removed when not in use?

The ETC card can be removed, but the ETC device will not function without it. According to the "Rules for the Use of Non-Stop Rapid Passage Systems," the ETC card must be inserted into the OBU device for normal operation; otherwise, user information cannot be read. If the card is removed, you can use the manual lane and have the staff swipe the card. When inserting the ETC card into the OBU device, a prompt sound will indicate that the device is activated. Without the card, the device remains in a dormant state and cannot recognize vehicle information at toll stations. Simply insert the card when needed. ETC is an electronic toll collection system, also known as an automatic road toll system. It is specifically designed for toll roads and is commonly used on highways, bridges or tunnels with toll policies, and certain urban road sections to alleviate traffic congestion. ETC Billing Principle: Highways have one or more ETC lanes. Through dedicated short-range microwave communication between the vehicle's windshield-mounted electronic tag and the microwave antenna in the toll station's ETC lane, the system uses computer networking technology to settle payments with banks in the background. This allows vehicles to pass through toll stations without stopping, all based on the principle of "pass first, deduct later." Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in queues. Green and eco-friendly: Reduces noise and exhaust emissions by allowing vehicles to pass through toll stations without stopping. Reduced wear and tear: Saves costs by minimizing vehicle starts and brakes, lowering wear and fuel consumption. Users also enjoy a 5% discount on toll fees. Improved efficiency: ETC lanes can theoretically increase vehicle throughput by 2-3 times, making traditional ETC faster, more advanced, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council's "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" explicitly states the goal of "achieving interoperability of transportation cards in key city clusters by 2020 and significantly increasing the proportion of vehicles equipped with ETC." It also sets a target of "50% ETC usage rate for road passenger vehicles by 2020" in the main indicators of comprehensive transportation development during the 13th Five-Year Plan. Future possibilities: In addition to continuously improving the convenience of ETC installation and usage rates for passenger vehicles, efforts will be made to promote ETC use for trucks and explore deeper integration of the ETC system with smart transportation directions such as vehicle-to-vehicle communication and vehicle-road coordination. This will provide comprehensive travel services for car owners, meaning more application scenarios will support ETC.

10

2

Share

How to Apply for a Vehicle Green Book?

What is the difference between 1.5 and 1.6 car engine displacement?

How to fold the mirrors on the Lavida?

How to Reset the Tire Pressure on the Trumpchi GS8?

How many points are deducted for running a red light and then stopping?

What brand is the Li ONE?

Should the ETC card in the car be removed when not in use?

Which Country Do Mercedes-Benz and BMW Belong To?

Do I need to add water when filling up with windshield washer fluid?

Is it okay to mix 92 and 95 gasoline?

What to Do When the One-Button Start Cannot Detect the Key?