How to Apply for a Driver's License Extension?

1 Answers
GiannaDella
07/29/25 4:26pm
Driver's license extension procedures are as follows: 1. Expiration period: If the driver's license has not been expired for more than 12 months, it can be renewed as usual. However, if it has been expired for more than one year but less than 3 years, you will need to retake the subject one exam to renew the license. Upon passing the exam, you can obtain the new license. If the expiration period exceeds three years, you will need to reapply for the driver's license. 2. Documents required for renewal: "Motor Vehicle Driver's License Application Form," which must be signed by the applicant; the original driver's license and the applicant's relevant documents; the identity proof of the driver (original and copy); if the applicant cannot be present, a jointly signed application form by the applicant and the agent, along with their identity proofs (original and copy), must be submitted; a medical certificate issued by a county-level or higher medical institution or a military medical institution at the regimental level or above. For applicants applying for a special small automatic passenger vehicle for the disabled, a medical certificate issued by a specialized medical institution designated by the provincial health authority must be submitted; three recent photos of the driver, taken within six months before the application. The photos must be front-facing, full-color, half-length ID photos with a white background, without any uniform clothing.
Was this review help?
10
3
Share
More Forum Discussions

What are the uses of car window tinting?

The functions of car window tinting are: 1. It can provide heat insulation in summer, saving air conditioning energy; 2. It can reduce energy loss in winter, maintaining the interior temperature; 3. It blocks ultraviolet rays, extending the lifespan and quality of interior decorations; 4. It reduces glare, ensuring safe and comfortable driving. The steps for car window tinting are: 1. Lay large towels on the front hood and dashboard; 2. Cover the seats with seat covers and wrap them tightly with plastic wrap; 3. Thoroughly clean the car windows; 4. Spray a small amount of window film installation solution on the outer surface of the window glass; 5. Carefully position the soft template over the glass by sliding it into place; 6. Cut the window film according to the template; 7. Apply the window film and use a squeegee to remove any bubbles between the film and the glass.
2
0
Share

What Causes Difficulty Engaging First Gear and Frequent Engagement of Third Gear?

Here are the specific reasons why first gear cannot be engaged and third gear is frequently engaged: 1. Clutch not fully depressed: For manual transmission vehicles, the clutch pedal must be fully depressed when shifting gears. It is necessary to press the clutch pedal deeply. 2. Gear stuck: The gear teeth may be misaligned, making it difficult to engage reverse gear. To resolve this, shift back into a forward gear and then attempt to engage reverse gear again. 3. Transmission malfunction: If the above two methods do not solve the problem, it is highly likely that the vehicle's transmission is faulty. When transmission issues arise, it is recommended to visit a 4S shop for professional service. Note that repair costs may be relatively high, and the repair time could be lengthy.
9
1
Share

What Causes Sudden Automatic Throttle Increase in Neutral Gear?

Sudden throttle increase may be related to the engine speed. The engine speed affects the number of work cycles per unit time or the effective power output of the engine, meaning the engine's effective power varies with different speeds. Engine speed: For a given effective power output, there is a corresponding optimal speed ratio. Speed and power: When a sudden increase in speed occurs, it indicates a mismatch with the actual power output, leading to increased fuel injection. Under certain speed conditions, the ECU adjusts the fuel injection quantity based on collected data. This data is typically derived from a comprehensive analysis of factors such as throttle opening, coolant temperature, and intake conditions to determine the correct fuel injection timing and quantity. Solution: It is recommended to inspect the intake system and related piping; check the throttle body (including sensors); examine the coolant temperature sensor; inspect the fuel injectors and ignition system; and verify the accelerator pedal and associated sensors.
11
4
Share

Where is the engine number of Dongfeng Xiaokang K17?

The engine number of Dongfeng Xiaokang K17 is located below the fixed corner on the right side of the engine. It is generally a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be viewed in the following 4 ways: The vehicle driving license has the engine number printed on it, usually located on the second last line; The motor vehicle registration certificate will indicate the engine number; The car purchase invoice will indicate the engine number; The vehicle purchase tax payment certificate will indicate the engine number. It should be noted that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer, and engine models can be the same. The engine number refers to the production number of the engine, each engine can only use one engine number and each engine's number is different.
3
4
Share

What does a car ABS system malfunction mean?

An ABS system malfunction in a car refers to the anti-lock braking system. The reasons for the ABS warning light to illuminate are: 1. Wheel speed sensor failure; 2. ABS circuit failure; 3. ABS pressure regulating solenoid valve failure; 4. ABS computer failure; 5. Poor electronic control device. The control channels of the ABS system are divided into: 1. Four-channel type, where a brake pressure regulator is installed in the pipeline leading to the brake cylinders of the four wheels for independent control; 2. Three-channel type, where the two front wheels are independently controlled, and the two rear wheels are controlled together according to the low-select principle; 3. Two-channel type, which is difficult to balance directional stability, steering control, and braking performance; 4. One-channel type, where a brake pressure regulator is installed in the rear wheel brake master pipe, and a wheel speed sensor is installed on the rear axle main reducer.
5
1
Share

What Causes the Abnormal Noise When Reversing a Cold Car?

Abnormal noises during reversing are generally caused by brake noises, which are normal clearance noises and not a sign of vehicle malfunction. Applying a thin layer of lubricant to the contact points between the brake pads and the brake caliper bracket can help alleviate this issue to some extent. When applying the lubricant, be careful not to get it on the friction surface of the brake pads or the brake disc, as this could negatively impact braking performance. Since the brake pads are mounted on the caliper bracket, under normal conditions, they fit tightly against the bracket's forward-facing end surface without any clearance, so no abnormal noise occurs when moving forward. However, during reversing, the vehicle's direction of movement is opposite, and there is some clearance between the brake pads and the rear end of the bracket. As a result, when braking, the brake pads may hit the rear surface of the bracket, producing a noticeable clunking sound.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.