How to adjust the time on Wuling Hongguang?

2 Answers
LeAdriana
07/24/25 9:33am
Method to adjust Wuling Hongguang time: First press and hold the clock button until you hear a beep, then release the button. The time display will start flashing. To set the hour, press and hold the H end of the preset button until the hour reading increments to the desired time. To set the minutes, press the M end, following the same principle as setting the hour. Then press the clock button to confirm the set time. The Wuling Hongguang is a microvan with dimensions of 4390mm in length, 1660mm in width, and 1750mm in height, with a wheelbase of 2720mm. In terms of suspension, the front suspension uses MacPherson independent suspension, while the rear suspension uses a leaf spring non-independent suspension.
Was this review help?
7
3
Share
VonGarrett
08/11/25 4:54am
I used to drive the Wuling Hongguang frequently, and adjusting the time was quite simple, but you have to be careful not to make a mistake. First, turn on the ignition switch, but don’t start the engine yet—this ensures safe operation. Second, look for the small clock icon button on the instrument panel or infotainment screen. Press it once to enter the settings menu. Third, use the adjacent directional buttons or knob to adjust the hour. Wait for the numbers to flash before setting the correct value, then it will automatically switch to the minute setting—adjust it the same way. Fourth, after setting, press the confirm button to save. If there’s no confirm button, wait a few seconds for it to exit automatically. I’ve noticed that having the correct time speeds up navigation synchronization. Every time the season changes, I check the time and also take a look at whether the battery is functioning properly. Remember not to get distracted while operating to avoid driving issues.
Was this review help?
8
0
Share
Expand All
More Forum Discussions

Where is the Bluetooth in the Land Rover all-English system?

To find the Bluetooth in the Land Rover all-English system, locate 'bluetooth' on the central control screen and select to turn it on. Activate the Bluetooth devices on both your phone and the car: To establish a pairing relationship between your phone and the car's Bluetooth device, enable the Bluetooth function on both devices and set your phone's Bluetooth to 'visible to all' in the settings. Pairing and connection: Search for Bluetooth devices on your phone, select the car's Bluetooth device once found, and pair using the password '0000'. The connection is successful once pairing is complete. Usage after successful connection: Once the car's Bluetooth is successfully paired with your phone's Bluetooth, you can make and receive calls. You can also play music on your phone and enjoy it through the car's Bluetooth device.
4
3
Share

What SUV models are available under the Volkswagen brand?

Volkswagen's SUV lineup includes the Touareg X, Touareg, Teramont, Tayron X, Tayron GTE, and Tayron. SUV stands for Sports Utility Vehicle, which combines the functionality of an off-road vehicle with urban driving capabilities. These vehicles are characterized by powerful performance, off-road capability, spacious and comfortable interiors, as well as excellent cargo and passenger capacity, typically accommodating 5+2 passengers. Taking the Touareg as an example: it is a mid-to-large luxury SUV under the Volkswagen brand, equipped with two engine options—one is a 2.0-liter turbocharged engine, and the other is a 3.0-liter turbocharged engine. The 2.0-liter turbocharged engine delivers a maximum power of 180 kW and a maximum torque of 370 Nm, while the 3.0-liter turbocharged engine offers a maximum power of 250 kW and a maximum torque of 450 Nm.
1
5
Share

What does chtrack mean in a car?

TRACK is commonly used in audio systems, referring to a track (often indicating the sequence number of a song, for example, the first song in the directory is Track1). Speakers are crucial components that determine the audio performance inside the car cabin and serve as the terminal of the car audio system. To enjoy stereo effects, two or more speaker systems are used in the car. The technical indicators of car audio include: 1. Output power: Most current head units indicate music power, ranging between 40W to 60W, and the power should not be too high. 2. Frequency response: The human ear can hear frequencies ranging from 20Hz to 20KHz, so this indicator should at least cover this range, and the wider the better. 3. Signal-to-noise ratio: This refers to the ratio of the music signal to noise. Generally, high-end car audio systems have a ratio above 90DB, and the higher the value, the better. 4. Harmonic distortion: This indicator reflects the fidelity of sound reproduction. The lower the value, the higher the fidelity, and the better the audio effect.
13
0
Share

How Many People Can a Sports Car Seat?

Sports cars can seat two people. Introduction to Overloading: Overloading refers to the actual load of a transportation vehicle exceeding the maximum allowable limit. Freight overloading usually means that the cargo transported by motor vehicles exceeds the total weight limit of the freight vehicle. Hazards of Overloading: Research has found that when the axle load of a vehicle exceeds the standard load by one time, driving on the highway once is equivalent to a standard vehicle driving on asphalt pavement 256 times or on cement concrete pavement 65,536 times. Moreover, the larger the vehicle's rated load capacity, the more severe the damage caused by overloading to the road. In China, the maximum single rear axle load of a vehicle recorded was 24 tons. Such a vehicle driving on a cement highway once is equivalent to a standard vehicle driving 1.21 million times.
11
5
Share

What is the top speed of 115 horsepower?

Horsepower or power (115 horsepower equals 84.5KW) is just a power parameter and does not correspond to the engine model. If the engine technology is advanced, 1.5 or 1.6 liters can achieve this, while for older technology, even 2.0 liters might not reach such power. Here is some related information about automotive horsepower: 1. Metric horsepower: Metric horsepower, also known as PS, is entirely man-made and set to a value very close to imperial horsepower. It is defined as the power required to lift 75 kilograms one meter in one second. That is: 1 metric horsepower = 75 kilogram-force·meters/second = 735 watts. 2. Imperial horsepower: The concept of horsepower as a unit was named by James Watt, the improver of the steam engine, to compare the power of his steam engine to that of a horse's pulling force. It is defined as 'the power of a horse capable of lifting 33,000 pounds one foot in one minute,' with watts (W) or kilowatts (kW) used as the standard units.
18
1
Share

How long does it take for imported cars to reach 4S stores after arriving at the port?

Imported cars arriving at the port generally follow several routes: first, those ordered by 4S stores; second, vehicles from import trading companies; third, small-scale customs-seized vehicles. If it's an imported car ordered by a 4S store, it usually takes about half a month to reach the local 4S store. Introduction to imported cars: Imported cars are vehicles manufactured abroad, then authorized for sale by domestic 4S store dealers. The prices of imported cars are relatively high due to authorization reasons, resulting in higher taxes, but they come with higher quality assurance. Introduction to parallel imported cars: Parallel imports, simply put, refer to imported cars sold without authorization but are legal vehicles. Apart from the domestic general distributors, other importers directly import the cars from the product's country of origin, with their import channels being 'parallel' to the domestic authorized distribution channels.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.