How to adjust the time on the 2012 Peugeot 308?

[JulietteLee]

2012 Peugeot 308 time adjustment method: Press the MENU button to enter the main menu, use the directional buttons below to select the personalized configuration menu item in the main menu, then press the OK button to enter the personalized configuration display control interface. Select the date and time menu under the display settings menu, and set the year, month, day, hour, minute, and 12-hour or 24-hour format respectively. After completion, press the OK button to save the settings. The 2012 Peugeot 308 is a compact car with body dimensions of 4558mm in length, 1805mm in width, and 1505mm in height.

[DeMalachi]

When I first bought my car, I also researched this. Setting the time on the 2012 Peugeot 308 is actually quite simple. First, sit in the driver's seat without starting the engine, just turn the key to the 'on' position to power up the dashboard. Then look for the stalk on the left side of the steering wheel - the button at the tip is labeled 'MODE'. Press it repeatedly to cycle through the dashboard display options until the time digits start blinking. Use the up/down arrows on the stalk to adjust the hours. After setting the hours, press 'MODE' again - now the minutes will flash, and you can adjust them using the same arrows. Finally, press 'MODE' once more to confirm. Be careful not to accidentally press other buttons during the process - last time my finger slipped and hit the windshield wiper button, which gave me a scare. After finishing, remember to take a short drive to verify the time setting was properly saved.

[ElainaRose]

I've been driving this car for eight years, and adjusting the time is something I can do with my eyes closed. Remember three key points: power on without ignition, the MODE button at the top of the stalk, and the up/down arrows for adjustment. After powering on, press MODE to switch to the time interface. When the hour digits flash, adjust the clock, then press MODE again to switch to minutes and continue adjusting. The key is to press briefly like an elevator button—holding it down will skip the setting. Also, be extra careful when adjusting the time in summer. Direct sunlight on the dashboard can cause screen glare, so it's best to block the light with your body before operating. After adjusting, I always check the odometer display to ensure it's working properly, since these functions share the same control buttons.

[LuciaDella]

As a DIY-loving car owner, I found adjusting the time on the 308 more straightforward than expected. After turning on the ignition and the dashboard lights up, locate the MODE button at the top of the left steering column stalk and press it repeatedly until the time digits flash, indicating entry into the setting mode. The stalk has two small arrow buttons on its side—simply push up or down to adjust the numbers. Adjusting hours and minutes requires two separate steps, with each step toggled by pressing MODE. It's advisable to make these adjustments with the engine off, as vibrations might cause accidental button presses. Just helped a neighbor with this over the weekend and realized this design is more convenient than some cars' center touchscreen controls—physical buttons allow for more reliable blind operation. After setting, press MODE to save, and the new time immediately appears in the center of the dashboard.

[DiAyla]

Having tried time adjustment methods in five different cars, the Peugeot 308's approach is arguably the most straightforward. The core lies in the stalk on the left side of the steering wheel: the round button on top is the MODE key, with up/down selection buttons on the side. After powering on, repeatedly press MODE until the clock flashes, then push the stalk up/down to adjust the hour. Click MODE again to enter minute setting. The entire process can be completed without looking down at the buttons - just feel the stalk's raised edges with your fingertips. Special reminder for northern drivers: press firmly with your knuckles when wearing thick winter gloves to prevent slippage. If settings reset due to incorrect saving sequence, simply restart from step one.

[Sabrina]

Every time daylight saving time adjusts, I have to reset the clock—this routine is practically engraved in my DNA. For the 308, without starting the engine but with power on, press the MODE button on the steering wheel stalk to switch displays until the clock flashes for adjustment. Use the stalk's up/down buttons to adjust hours, which feels similar to a gamepad's directional pad. The key is pressing MODE to confirm each step: press once after setting hours to enter minute adjustment, then press again to lock after setting minutes. Once, I forgot to confirm, and the time reset due to road bumps, making me miss an appointment. Now, I take a photo of the dashboard post-setup as a backup, also noting the maintenance reminder mileage—killing two birds with one stone.