How to Adjust the Headlight Height of the Sylphy?
4 Answers
When the ignition switch is in the "ON" position and the headlights are turned on, the headlight beam control will function, adjusting the headlight axis based on driving conditions. Here are the details about the Sylphy: 1. Powertrain: Equipped with a 1.6L naturally aspirated engine compliant with China's National VI emission standards, delivering a maximum power of 99kW (135 horsepower) and a peak torque of 159Nm, paired with a CVT transmission. 2. Dimensions: The vehicle measures 4641mm in length, 1815mm in width, and 1450mm in height, with a wheelbase of 2712mm and a curb weight of 1243kg.
As a long-time owner of the Nissan Sylphy, I'd like to share my experience with headlight height adjustment. The Sylphy's headlight adjustment is quite straightforward and primarily manual: Open the engine hood, locate the vertical adjustment screw (usually white or black) behind the headlight, then use a Phillips screwdriver to rotate counterclockwise or clockwise to raise or lower the beam. Before adjusting, it's best to park on level ground with the engine off and test the alignment against a wall. Too high beams will dazzle road signs, while too low beams won't illuminate the road properly. My 2016 model requires annual adjustment for safety as rough roads can loosen the setting. If you can't locate the screws, check the owner's manual - newer models might have an electric adjustment button on the left side of the steering wheel, though most Sylphys still use manual adjustment. Always test the adjusted lights during night driving to ensure they don't create glare for other drivers.
I often help my neighbors with car repairs and found that adjusting the headlights on the Sylphy has its tricks. Most Sylphy models, like the 2019 Classic Edition, allow direct adjustment under the engine compartment. Open the cover and look for the plastic knob or screw hole on the outer side of the headlight—the vertical one is for height adjustment. Gently turn it a few times with your hand or a screwdriver to change the beam height; no professional tools are needed, but adjust slowly to avoid damage. If the headlights are consistently too low or high, it might be due to stripped screws or aging lamp sockets that require replacement parts. Choose nighttime for adjustment and check the beam shape against a wall to ensure it forms a standard horizontal line. Safety first—never adjust on the highway to avoid distraction.
When I first got my Sylphy, the headlights were set too high, and I kept getting flashed by oncoming cars at night. I tried adjusting them myself starting from under the hood, found the knob at the back of the headlights, and just turned it down a bit—it was simple, no need to stress. The manual didn’t specify the exact location, but it wasn’t hard to figure out. Key steps: Park on level ground, turn off the engine, open the hood, locate the vertical screw-marked adjustment hole near the headlight, and twist it by hand a few times to test the beam change.
