How to adjust the audio system in Roewe i5?

Should the Auxiliary Battery Be Replaced if It Malfunctions?

Pay attention to checking the condition of the battery, and replace it promptly if there are any issues. Below is an introduction to battery-related information: Charging method: Use constant voltage with current limiting for charging. Duration: Charge at a constant voltage of 14.8V with a current limit of 15A for 16 hours, followed by a constant current of 3A for 4 hours, totaling 20 hours. Below is extended information on battery charging voltage and current: Voltage: The charging voltage for motorcycles is 12V. During the charging process, the charging voltage is mostly between 13.5-14.5V. When charged on the vehicle by the rectifier, it will not exceed 15V. If a charger is used, the charging voltage is generally 14V. Current: During the charging process for motorcycles, the charging current should not be too large. It is recommended that car owners avoid using fast charging. When charging, use half of the rated charging current and extend the rated charging time by double.

14

1

Share

Is it necessary to replace the wheel if it has a dent?

It is not always necessary to replace a wheel if it has a dent, as it mainly depends on the location and severity of the damage. Here is a detailed analysis: Location of the dent: If the dent is on the side of the wheel, replacement is usually not required. However, if the dent is at the junction between the wheel and the tire sidewall and is severe, then replacement is necessary. This is because the dent can affect the seal between the tire and the wheel, potentially leading to a loss of tire pressure and posing a safety hazard. Precautions for repair: Since most wheels are made of aluminum alloy, if the vehicle is driven at high speeds, the wheel may be damaged by road debris, resulting in a small dent. Aluminum alloy is relatively brittle, and the dented area may be compromised. Attempting to forcefully restore the wheel to its original shape could cause it to crack.

7

5

Share

What raw materials are used to make vehicle urea?

The raw materials for urea production are carbon dioxide and ammonia. The primary use of urea in vehicles is to reduce harmful nitrogen oxides in exhaust gases into nitrogen and water. It is generally used in diesel vehicles. Below is an introduction to the related content: Principle: The harmful substances in diesel vehicle exhaust are mainly nitrogen oxides and particulate matter. Technical measures can be employed within the engine to reduce particulate emissions, leaving nitrogen oxides as the primary component in the exhaust. By injecting urea into the exhaust after-treatment device, the urea decomposes into ammonia at high temperatures. Under the action of a catalyst, the ammonia reacts with nitrogen oxides to produce harmless nitrogen and water. This device is called the SCR (Selective Catalytic Reduction) after-treatment system. Urea Tank: Vehicles have a dedicated urea tank where urea is stored. As long as the vehicle is running, urea will be consumed, so it must be replenished in a timely manner. Typically, about 4 liters of urea are consumed per 100 liters of diesel fuel.

15

2

Share

Can I apply for an electronic driving license through the Traffic Management 12123 app?

You can apply for an electronic driving license through the Traffic Management 12123 app. Below is additional information about electronic driving licenses: Functions of electronic driving licenses: The primary function of an electronic driving license is to serve as a direct substitute for a paper driving license. If you are stopped by traffic police for a spot check or need to handle a traffic violation promptly, the electronic driving license can be used in place of the paper version. Notes on electronic driving licenses: Electronic driving licenses have usage restrictions. Generally, they are only valid within specific areas such as the local city. Additionally, if a driver's license is temporarily suspended, the electronic version cannot be used during that period.

19

5

Share

Will insurance cover a car that was flooded while parked?

If you did not purchase waterlogging insurance, the insurance company will not compensate. If you forcibly start the engine after the car is flooded, the resulting damages will also not be covered by insurance. Below is relevant information: Regulations: According to China's motor vehicle insurance clauses, vehicle losses caused by natural disasters such as heavy rain or floods fall under the coverage of commercial auto insurance's vehicle damage insurance. Therefore, expenses like rescue fees, cleaning costs, electrical damages, and interior part losses incurred after a vehicle is flooded are all covered by vehicle damage insurance, and the insurance company should provide compensation. However, vehicle damage insurance does not cover engine water damage caused by flooding or secondary startups - this is covered by waterlogging insurance. Waterlogging Insurance: Also known as engine special loss insurance, it covers compensation for engine damage caused by driving through waterlogged roads or flooding. Additionally, since auto insurance clauses usually have a deductible rate, if you did not purchase the "no-deductible special clause," the insurance company will deduct the deductible amount before providing compensation after an accident occurs.

16

2

Share

What does the iPod mode of the car USB interface mean?

The iPod function in the car means connecting an iPod, USB, or USB flash drive. It allows playback control through the car's audio system. Here is an introduction to related content about car Bluetooth: Programming: Some mobile phones' music playback programming does not match the pairing codes of certain car models, so they can only answer calls but not play music. It may require changing the Bluetooth playback frequency band, etc. Multimedia Music: If the car Bluetooth's multimedia music is not turned on, it needs to be enabled. Media Audio: If the phone's media audio is not turned off, it may cause signal interference with the Bluetooth function. Here are extended reasons why the car navigation Bluetooth might not connect: Car Location: The car's location may be subject to signal shielding or interference. Matching Issue: The phone's Bluetooth and the car's Bluetooth cannot match each other. Connection Conflict: The phone may already be connected to another Bluetooth device, causing a conflict when trying to connect to the car's Bluetooth. Incorrect Password.

8

1

Share

How to adjust the audio system in Roewe i5?

Should the Auxiliary Battery Be Replaced if It Malfunctions?

Is it necessary to replace the wheel if it has a dent?

What raw materials are used to make vehicle urea?

Can I apply for an electronic driving license through the Traffic Management 12123 app?

Will insurance cover a car that was flooded while parked?

What does the iPod mode of the car USB interface mean?

How many days does it take for a windshield to dry after replacement in winter?

What to Do When the Traffic Light Turns Red While Your Car Is in the Middle of the Road?

Why does the manual transmission always get stuck when shifting from 1st to 2nd gear?

Will a Car Door Rust If the Paint Chips Off?