How to Add Car Coolant? Where to Add It?

1 Answers
Peterson
07/29/25 7:30pm
Open the coolant filler cap and the drain valve to add antifreeze. The antifreeze reservoir usually has water level markings indicating the maximum and minimum levels. It is generally recommended to add about 4 liters, but this should be adjusted based on the actual condition of the car. Here is some relevant information: 1. Function of antifreeze: Antifreeze is not only used in winter. It has anti-freeze, cooling, anti-corrosion, and anti-scaling effects. The main functions are anti-freeze and cooling, ensuring the car can operate normally without freezing in cold climates and cooling the high-temperature engine during operation. 2. Hazards of insufficient antifreeze: Too little car antifreeze can cause the engine or radiator to freeze and crack, leading to engine failure.
Was this review help?
18
1
Share
More Forum Discussions

What Does Controlled Vehicle Mean?

Vehicle insurance control can be divided into underwriting control and claims control. Underwriting control involves judging and analyzing factors such as the vehicle's insurance premium rate, the condition and age of the subject vehicle, usage status, risk level, historical claim records, and traffic violations to decide whether to insure or not, or to increase or decrease the premium rate. Expanded information is as follows: 1. Controlled Vehicle: A controlled vehicle refers to a specific model that, due to high claim frequency and payout rates, is subject to certain restrictions during underwriting. For example, comprehensive coverage may not include zero deductible, or scratch insurance may not be available. These are measures adjusted by the company based on operational needs. 2. Other Concepts: There are many concepts related to controlled vehicles, such as vehicles that have not undergone annual inspections, or used vehicles listed as stolen or robbed in the vehicle management network, etc.
16
1
Share

How long after laying asphalt can vehicles drive on it?

2 hours. Generally, asphalt will be mostly solidified about 2 hours after laying, so vehicles can drive on it without worrying about asphalt sticking to the car body or damaging the newly laid asphalt road. Some asphalt pavements laid with cold asphalt mixtures can be opened to traffic immediately after being fully compacted. Here is some related information: 1. Asphalt removal methods: You can go to a professional car detailing shop for cleaning, where they will handle it. You can also purchase tar remover and remove it yourself, but this can damage the car paint, so frequent use is not recommended. 2. Main uses of asphalt: The main use of asphalt, about 70% of it, is in road construction, where it is used as a glue or binder mixed with construction aggregate particles to produce asphalt concrete. Other major uses of asphalt include waterproofing, such as in the production of roofing felt and sealing flat roofs.
3
5
Share

Will car seats wear out without mats?

Yes, they will wear out. Car floor mats are an eco-friendly automotive interior component that integrates five main functions: water absorption, dust collection, stain removal, noise insulation, and protection of the main carpet. As interior decorations, car floor mats help maintain cleanliness both inside and outside the vehicle while adding aesthetic appeal and comfort. Here's additional information: Considerations for floor mats - Thicker doesn't necessarily mean better. Some consumers prioritize thickness when selecting floor mats, but the material is actually the most crucial factor. A well-designed floor mat set is not only resistant to wear but also easy to clean, lasting three to five years without issues.
7
3
Share

What Causes the Center Console Rattle in the Atenza?

Atenza center console rattle may be caused by navigation system malfunction. Below are specific details about the Atenza: 1. Configuration: The new vehicle comes standard with intelligent idle stop system and brake energy recovery system. The Atenza 2.5L model accelerates from 0-100km/h in just 8.3 seconds, with a combined fuel consumption as low as 6.9L/100km, while the 2.0L model achieves only 6.3L/100km. 2. Exterior: Featuring Mazda's KODO design philosophy, the U-shaped front grille paired with LED headlights enhances its sporty appearance. The new model introduces an 11-speaker audio system. Compared to the previous generation Mazda6, the Atenza's wheelbase has increased by 105mm, providing more spacious rear seating. The Atenza utilizes Skyactiv chassis technology, equipped with high-performance MacPherson strut front suspension + multi-link independent rear suspension. Through structural optimization, it achieves both weight reduction and increased rigidity.
14
1
Share

Is the Baojun 730 Allowed to Transport Goods by Traffic Police?

No, it is not allowed because this vehicle is a family car, and the vehicle registration certificate also states that it is a passenger car, not a truck. Below is the relevant introduction of the Baojun 730: 1. Power: Equipped with a "1.5T turbocharged engine + simulated 8-speed CVT continuously variable transmission" powertrain. The engine has a rated power of 111kW and a maximum net torque of 250N·m. The turbo intervenes at around 1000 rpm and reaches the maximum torque of mainstream 2.4L naturally aspirated engines on the market at 1600 rpm. 2. Configuration: Standard with an 8-inch floating central multimedia screen, while higher-end models offer a 7-inch full LCD instrument panel. The new car features functions such as Car-play and the SSP-LINK in-car connectivity platform, supporting both Android and Apple systems. 3. Interior: The interior of the new Baojun 730 automatic transmission adopts a new black and gray color scheme, paired with dark wood-grain imitation panels on the dashboard, ice-blue ambient lighting, and new dual-tone luxury seats, giving the interior a sense of layering, quality, and visual spaciousness.
9
0
Share

Is Using Expired Fuel Additives Harmful to Vehicles?

Expired fuel additives should not be used. As a type of fuel additive, expired fuel additives undergo chemical changes that render them ineffective in cleaning engine carbon deposits and protecting the engine. Additional information is as follows: 1. Introduction: Fuel additives, commonly known as the third generation of gasoline detergents (also referred to as gasoline detergents or fuel additives), are designed to address carbon deposit issues in the fuel system of fuel-injected vehicles, quickly restore the engine to optimal working conditions, and compensate for certain deficiencies in gasoline properties while imparting new beneficial characteristics (such as improving atomization, reducing wear, protecting the engine, and lowering emissions). 2. Usage: Fuel additives are high-threshold technical products with high costs and single-bottle prices, making them a hotspot for numerous low-quality and even counterfeit products. Using counterfeit products not only fails to remove carbon deposits and maintain the engine but may also cause damage to the engine.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.