How to Activate the One-Touch Window Lift Function with the Kicks Car Key?

1 Answers
DiGia
07/25/25 2:06pm
Method to activate the one-touch window lift function with the Kicks car key: 1. Before setting, start the engine, press the button for 5 seconds, then lift the button for 5 seconds, and the system will record it to successfully activate; 2. Pull the switch to the first position and hold it until the window moves to the desired position, then briefly pull the switch to the second position to enable the one-touch window lift function. The Kicks is a compact SUV under Dongfeng Nissan, with dimensions of 4295 mm in length, 1760 mm in width, and 1588 mm in height, and a wheelbase of 2620 mm. The Kicks features a family-style taillight design and a black plastic rear bumper. This car is equipped with an HR15 1.5L naturally aspirated engine, with a maximum power output of 90 kW.
Was this review help?
4
1
Share
More Forum Discussions

What Causes the Alarm to Sound a Few Minutes After Locking the Car?

The alarm sounding a few hours after locking the car is due to the vehicle alarm system failing to detect the front sensor or the front sensor sending an alarm signal, which triggers the alarm. The solution is to inspect the sensor causing the alarm and check the vehicle's wiring. Here is an introduction to car alarms: Function: A car alarm is an alarm device installed in a vehicle. If someone hits, impacts, or moves the car, the sensor sends a signal to the controller, indicating the intensity of the vibration. Depending on the vibration intensity, the controller emits a warning sound or fully activates the alarm. This serves to deter thieves and alert the owner. Development: From the 1990s to the present, car alarms have developed rapidly and are increasingly widely used. As car alarm technology has become more mature, cost control is no longer a challenge, and car alarms have become essential equipment for every car owner. In the next decade, it is believed that car alarm systems will incorporate more advanced technologies. In-vehicle GPS receivers have opened up vast possibilities in the security field. If the receiver is connected to the alarm system controller, it can report the vehicle's location to the owner or the police at any time.
20
4
Share

What are the letters on the back of the Phaeton?

The letters on the back of the Phaeton are 'Phaeton'. This luxury sedan is produced by the German automaker Volkswagen, with dimensions of 5175mm in length, 1903mm in width, and 1450mm in height, and a wheelbase of 3001mm. The vehicle is equipped with a W12 engine, delivering a maximum power of 331kW and a maximum torque of 560Nm. It is paired with a 5-speed automatic transmission. The car comes standard with 4MOTION four-wheel drive technology, which excels in traction and road stability. Particularly during load changes, the four-wheel drive system demonstrates superior performance, with fully variable power distribution across all four wheels based on the degree of slippage.
9
1
Share

What is the difference between a sedan and a three-box car?

Here is an introduction to the differences between a three-box car and a sedan: Different structures: A three-box car consists of the front engine compartment, the middle passenger compartment, and the rear luggage compartment. A sedan extends the passenger compartment approximately evenly in height towards the rear, integrating the luggage compartment with the passenger compartment, reducing it to two "boxes"—the engine compartment and the passenger compartment—without a protruding rear luggage compartment. Different features: A three-box sedan is high in the middle and low at both ends, appearing symmetrical from the side, with an aesthetically pleasing and elegant design. The disadvantage of a three-box sedan is its longer body size, making it less convenient to drive and park in congested urban areas. A sedan features a spacious rear door, giving it flexibility and versatility. By folding down the rear seats, it can provide much larger cargo space than a three-box car, suitable for transporting large household appliances and items.
14
1
Share

Is Chery a Domestic or Joint Venture Car?

Chery is a domestic car, and its models include: Tiggo 8, Tiggo 5x, Tiggo 3x, Tiggo 3, Arrizo 5e, etc. Taking the 2020 Tiggo 8 as an example, its body dimensions are: 4700mm in length, 1860mm in width, 1746mm in height, with a wheelbase of 2710mm and a trunk capacity of 889l. The 2020 Tiggo 8 features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 156ps, a maximum power of 115kw, and a maximum torque of 230nm, paired with a 6-speed manual transmission.
10
3
Share

How to Install Car Bumper Guards?

First, clean the area where you need to install the bumper guard with a towel. Peel off a small portion of the adhesive strip inside the bumper guard to better secure its position. Then, attach the adhesive side of the bumper guard to the desired installation location. While pressing the bumper guard along the direction, peel off the remaining double-sided tape. Finally, trim any excess protruding bumper guard to complete the installation. Are you referring to bumper guards on the front and rear bumpers or those on the doors? Bumper guards are essentially decorative strips. Those on the front and rear bumpers are usually attached with 3M double-sided tape, while door bumper guards may be adhesive, clip-on, or secured with screws from the inside of the door. First, clean the area where you need to install the bumper guard with a towel. Peel off a small portion of the adhesive strip inside the bumper guard to better secure its position. Then, attach the adhesive side of the bumper guard to the desired installation location. While pressing the bumper guard along the direction, peel off the remaining double-sided tape. Finally, trim any excess protruding bumper guard to complete the installation.
14
0
Share

What to Do When the Engine Yellow Light on the Car Dashboard Comes On?

When the engine yellow light appears on the car dashboard, it indicates that there may be an issue with the engine. There are two scenarios: if, when the power is turned on, all warning lights including the engine fault light illuminate and then turn off, this is normal. However, if the light remains on after the car is started, it signifies a fault in the vehicle. The engine yellow light is often related to fuel quality or sensor issues. Fuel quality concerns can involve both gasoline and engine oil. Gasoline comes in specific grades, and owners should use the grade recommended by the manufacturer. Similarly, engine oil varies between semi-synthetic and fully synthetic, and it should also be added according to the manufacturer's specifications. If the owner fails to follow these guidelines, prolonged use can lead to engine wear, triggering the fault light.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.