How to Activate Cruise Control on a Lexus?

Can a car pass the annual inspection after replacing halogen lights with LED lights?

Whether the modified LED headlights can pass the annual inspection depends on the specifications and performance of the modified headlights. If the modified headlights meet the national requirements in terms of color temperature, brightness, and beam angle, which affect driving safety, they can pass the annual inspection. Two main aspects are checked: Whether the brightness meets the requirements, meaning the brightness must not be less than 1400 lumens. Whether the beam angle is up to standard, as long as the high and low beam angles are normal. Essentially, if the modified LED headlights do not affect driving safety, they can pass the annual inspection smoothly. Relevant regulations for vehicle annual inspections: Vehicles that fail the annual inspection must be repaired within a specified period. If they still fail after the deadline, the vehicle management office will confiscate their license plates and prohibit them from continuing to drive. Vehicles that do not undergo the annual inspection without reason or fail the inspection are not allowed to drive on the road or transfer ownership. Vehicles that meet the scrapping conditions or exceed the prescribed service life will not be inspected, and their license plates will be revoked, their files deleted, and they will be scrapped.

16

5

Share

What Causes Uneven Steering Wheel Resistance?

The following may be the reasons for uneven steering wheel resistance: 1. Check if the tire pressure is normal. 2. Incorrect chassis suspension camber angle may cause uneven steering resistance. First, inspect the chassis data to verify the correct steering method. 3. Remove the wheels and steering tie rod ball joints. If the issue persists, there may be a problem with the steering gear. 4. Perform a four-wheel alignment to detect the problem. Generally, the steering wheel is connected to the steering shaft via splines. Its function is to convert the force applied by the driver on the steering wheel rim into torque, which is then transmitted to the steering shaft. A larger-diameter steering wheel requires less hand force from the driver when turning. The steering intermediate shaft serves as a connecting component between the steering gear and the steering shaft, facilitating the standardization of the steering gear and compensating for manufacturing and installation errors, thereby optimizing the installation of the steering gear and steering wheel in the vehicle.

18

4

Share

How many kilometers can a Honda URV370 run on a full tank of gas?

It can run approximately over 500 kilometers, with specific variations depending on actual conditions. The Honda Avancier is a standard passenger vehicle with a fuel tank capacity of only 57 liters. The engine displacement can be roughly estimated based on the vehicle's fuel tank capacity. Additional information: 1. The Honda Avancier uses Honda's more fuel-efficient and powerful Earth Dreams series engine. The 1.5T model has a fuel consumption of about 8 liters per 100 kilometers, while the 2.0T model consumes approximately 9.2 liters per 100 kilometers. A full 57-liter tank can provide a range of over 600 kilometers. Equipped with standard start-stop and cruise control systems, it delivers better fuel efficiency whether driving on highways or urban roads. 2. The Avancier's Earth Dreams engine also features an Economy (ECON) mode, which further reduces fuel consumption. Compared to other vehicles in its class, the Avancier strikes a balance between power and fuel efficiency. While it doesn't have outstanding fuel economy, its power performance is by no means weak. If not for its high ground clearance, it wouldn't feel like driving a two-ton mid-size SUV at all.

15

4

Share

What is the white solid line in front of the zebra crossing?

The white solid line in front of the zebra crossing refers to the no-crossing same-direction lane divider. Below is relevant information about white solid lines: 1. Introduction to white solid lines: White solid lines cannot be crossed. If there is a dashed line between two same-direction lanes, lane changes are permitted; if it's a solid line, lane changes are prohibited. The white solid line along the roadside is used to divide motor vehicle lanes from non-motor vehicle lanes, also serving as the boundary line for motor vehicle lanes. 2. Benefits of white solid lines: Road traffic markings are primarily painted on road surfaces and must withstand sun exposure, rain, snow, freezing temperatures, and vehicle impact and wear, thus requiring strict performance standards. Firstly, they must have short drying times and simple application to minimize traffic disruption. Secondly, they must have strong reflectivity, bright colors, and high visibility both day and night. Additionally, they must possess anti-slip and wear-resistant properties to ensure traffic safety and longevity.

19

1

Share

What are the functions of all buttons in the 2021 Tiguan?

Here is an introduction to the functions of all buttons in the 2021 Tiguan: 1. SYNC: Dual-zone climate control switch. Models equipped with this feature allow separate temperature control for the driver and front passenger. 2. Electronic Stability Program (ESP): Enabled by default, it is generally not recommended to turn it off manually. This system effectively prevents loss of vehicle control during extreme driving conditions. 3. Hazard Warning Lights (commonly known as hazard lights): Used in special situations such as vehicle breakdown or temporary parking, primarily to alert other vehicles. 4. Residual Heat Heating: After the vehicle is turned off, it can utilize residual engine heat to provide warmth inside the cabin for a certain period. 5. Parking Radar/Image: Alerts the driver to surrounding obstacles through images and warning sounds. 6. Driving Assistance System: Includes features such as collision warning, close distance warning, and fatigue reminder. 7. Auto Hold: Reduces foot fatigue during stops like at traffic lights by automatically locking the wheels with the brake calipers.

1

4

Share

Can Vehicle Antifreeze Be Mixed with Water?

It is not recommended to mix vehicle antifreeze with water, unless it is a special type of antifreeze that requires dilution with water in a specific ratio, and the water used must meet certain requirements, typically distilled water. Mixing antifreeze with water lowers its boiling point, which can significantly impact the engine's cooling system, whether in summer or winter. Antifreeze Replacement Cycle: Vehicle antifreeze generally needs to be replaced every 2 years or 40,000 kilometers. This is only a reference interval. For commercial vehicles with higher mileage, the replacement cycle should be shorter. Since driving conditions vary for each vehicle, the replacement should be based on actual usage. Check the antifreeze's condition regularly. If the antifreeze level is low, top it up promptly. If suspended particles, sediment, or signs of deterioration or discoloration are observed, replace the antifreeze immediately and flush the system. Functions of Antifreeze: Antifreeze is a coolant containing special additives, primarily used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing in winter, boiling in summer, and resisting scale and corrosion year-round.

10

5

Share

How to Activate Cruise Control on a Lexus?

Can a car pass the annual inspection after replacing halogen lights with LED lights?

What Causes Uneven Steering Wheel Resistance?

How many kilometers can a Honda URV370 run on a full tank of gas?

What is the white solid line in front of the zebra crossing?

What are the functions of all buttons in the 2021 Tiguan?

Can Vehicle Antifreeze Be Mixed with Water?

Why Is There a Gasoline Smell in the Car?

Is Overtaking Allowed on Curves?

What should be paid attention to in the daily driving of an automatic transmission car?

What is the fuel consumption of a Corolla with air conditioning on?